Gas welding equipment - Blowpipes for gas welding, heating and cutting - Specifications and tests - Amendment 2

Matériel de soudage aux gaz — Chalumeaux pour soudage aux gaz, chauffage et coupage — Spécifications et essais — Amendement 2

General Information

Status
Published
Publication Date
14-Apr-2015
ICS
25.160.30 - Welding equipment
Technical Committee
ISO/TC 44/SC 8 - Equipment for gas welding, cutting and allied processes
Drafting Committee
ISO/TC 44/SC 8 - Equipment for gas welding, cutting and allied processes
Current Stage
6060 - International Standard published
Start Date
15-Apr-2015
Due Date
08-Feb-2015
Completion Date
08-Feb-2015

Relations

Amends
ISO 5172:2006 - Gas welding equipment - Blowpipes for gas welding, heating and cutting - Specifications and tests
Effective Date
13-Oct-2020

Overview

ISO 5172:2006/Amd 2:2015 is an amendment to the international standard specifying requirements for gas welding equipment, particularly blowpipes used in gas welding, heating, and cutting operations. This amendment aligns the standard with updated gas letter codes from ISO 10225, ensuring accurate marking and safety information on welding tools. Developed by ISO Technical Committee 44 (Welding and allied processes), Subcommittee SC 8, this standard amendment supports uniformity, safety, and compatibility in industrial gas welding equipment globally.

Key Topics

  • Gas Welding Blowpipes: Specifications and tests critical to maintaining high quality and consistent performance during gas welding, heating, and cutting.
  • Amendment Focus: Updates related to the marking system of gas welders, replacing previous tables with references to Section 6.8, in line with ISO 10225.
  • Marking Requirements: Introduction of gas letter codes according to ISO 10225 when the chemical name or symbol cannot be marked directly on equipment.
  • System of Marking: Adjustments to Annex J that clarify marking symbols, distinguishing between fuel gas and oxygen/compressed air for improved safety and usability.

Applications

  • Industrial Welding: Ensures blowpipes are accurately labeled and tested, reducing operational risks in manufacturing, construction, and repair tasks involving gas welding and cutting.
  • Safety Compliance: Supports compliance with international safety standards by mandating clear and consistent equipment markings, helping prevent gas mixture errors.
  • Equipment Manufacturing: Provides guidance for manufacturers to update labeling protocols based on the latest gas letter coding system, enhancing global interoperability.
  • Quality Assurance: Facilitates rigorous testing and certification processes that boost confidence in equipment reliability and safety performance.

Related Standards

  • ISO 10225: Gas welding equipment - Marking for equipment used for gas welding, cutting, and allied processes - Provides the updated gas letter codes referenced in this amendment.
  • ISO/TC 44 Series: Broad standards covering welding and allied processes, including safety requirements, equipment specifications, and quality control.
  • ISO/IEC Directives Parts 1 & 2: Guidelines governing the development, editorial rules, and maintenance of International Standards like ISO 5172.

Keywords: gas welding equipment, blowpipes, gas cutting, welding safety, ISO 5172 amendment, gas letter codes, ISO 10225 marking, welding equipment specifications, industrial welding safety, gas welding standards

Frequently Asked Questions

ISO 5172:2006/Amd 2:2015 is a standard published by the International Organization for Standardization (ISO). Its full title is "Gas welding equipment - Blowpipes for gas welding, heating and cutting - Specifications and tests - Amendment 2". This standard covers: Gas welding equipment - Blowpipes for gas welding, heating and cutting - Specifications and tests - Amendment 2

Gas welding equipment - Blowpipes for gas welding, heating and cutting - Specifications and tests - Amendment 2

ISO 5172:2006/Amd 2:2015 is classified under the following ICS (International Classification for Standards) categories: 25.160.30 - Welding equipment. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO 5172:2006/Amd 2:2015 has the following relationships with other standards: It is inter standard links to ISO 5172:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

ISO 5172:2006/Amd 2:2015 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


INTERNATIONAL ISO
STANDARD 5172
Third edition
2006-04-01
AMENDMENT 2
2015-04-15
Gas welding equipment — Blowpipes
for gas welding, heating and cutting —
Specifications and tests
AMENDMENT 2
Matériel de soudage aux gaz — Chalumeaux pour soudage aux gaz,
chauffage et coupage — Spécifications et essais
AMENDEMENT 2
Reference number
ISO 5172:2006/Amd.2:2015(E)
©
ISO 2015
ISO 5172:2006/Amd.2:2015(E)
© ISO 2015
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2015 – All rights reserved

ISO 5172:2006/Amd.2:2015(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that so
...


NORME ISO
INTERNATIONALE 5172
Troisième édition
2006-04-01
AMENDEMENT 2
2015-04-15
Matériel de soudage aux gaz —
Chalumeaux pour soudage aux
gaz, chauffage et coupage —
Spécifications et essais
AMENDEMENT 2
Gas welding equipment — Blowpipes for gas welding, heating and
cutting — Specifications and tests
AMENDMENT 2
Numéro de référence
ISO 5172:2006/Amd.2:2015(F)
©
ISO 2015
ISO 5172:2006/Amd.2:2015(F)
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2015
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2015 – Tous droits réservés

ISO 5172:2006/Amd.2:2015(F)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est
en général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l’ISO participent également aux travaux.
L’ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui concerne
la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier de prendre note des différents
critères d’approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir www.
iso.org/directives).
L’attention est appelée sur le fait que certains des éléments du présent document peuvent faire l’objet de
droits de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable
de ne pas avoir iden
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...