Textile machinery - Safety requirements - Part 3: Nonwoven machinery - Amendment 2

Matériel pour l'industrie textile — Exigences de sécurité — Partie 3: Machines de production de nontissés — Amendement 2

General Information

Status
Published
Publication Date
18-May-2016
ICS
59.120.99 - Other textile machinery
Technical Committee
ISO/TC 72/SC 8 - Safety requirements for textile machinery
Drafting Committee
ISO/TC 72/SC 8/WG 1 - Safety requirements for textile machinery
Current Stage
9092 - International Standard to be revised
Start Date
28-Mar-2025
Completion Date
13-Dec-2025

Relations

Consolidates
ISO/TS 2963:2006 - Cheese and processed cheese products - Determination of citric acid content - Enzymatic method
Effective Date
06-Jun-2022
Consolidated By
ISO 21597-2:2020 - Information container for linked document delivery - Exchange specification - Part 2: Link types
Effective Date
06-Jun-2022
Amends
ISO 11111-3:2005 - Textile machinery - Safety requirements - Part 3: Nonwoven machinery
Effective Date
25-Apr-2020

Overview

ISO 11111-3:2005/Amd 2:2016 is an important amendment to the international standard covering safety requirements for textile machinery, specifically focusing on nonwoven machinery. Published by ISO, this amendment updates and refines safety protocols to enhance operator protection and operational safety in the production of nonwoven textiles. It aligns with broader ISO directives such as ISO 12100 for machinery safety principles and references complementary standards related to noise reduction and measurement in the textile industry.

By implementing these safety measures, manufacturers and operators of nonwoven textile machinery can significantly reduce the risk of mechanical hazards, ensuring safer work environments and compliance with global best practices.

Key Topics

  • Scope and Application: This amendment addresses safety requirements particular to nonwoven textile machinery, with a special focus on hydroentangling (hydroliage) machines, which use high-pressure water jets to entangle fibers.

  • Updates and Normative References:

    • Reference updates include the replacement of earlier dated standards with the most recent such as ISO 12100 instead of ISO 12100-1 and ISO 14121-1.
    • Integration of additional relevant standards like ISO 23771 for noise emission reduction and ISO 9902 series for noise measurements ensures comprehensive coverage.

  • Safety Requirements for Hydroentangling Machines:

    • Specifies hazard identification, including mechanical dangers from water jets, conveyor belts, rollers, and potential crush or cut points.
    • Emphasizes the importance of protective enclosures and interlocked guards to prevent access to hazardous zones during operation.
    • Outlines the need for safety controls such as emergency stop devices accessible from various operator positions.
    • Restricts activation of high-pressure jets during maintenance or loading to avoid injury.

  • Risk Reduction Strategies:

    • Incorporates measures for risk mitigation by design and protective devices, responding to both common and particular mechanical hazards.
    • Addresses ergonomic considerations and noise control as critical to comprehensive machinery safety.

Applications

  • Textile Manufacturing Facilities: Factories using nonwoven machinery such as hydroentangling equipment benefit from the updated safety guidelines by improving worker protection and reducing workplace injury risks.

  • Machine Design and Engineering: Machinery designers can apply these safety requirements early in development to ensure compliance with international safety norms, reducing later modifications and liability.

  • Maintenance and Operational Protocols: Operators and maintenance personnel can use this standard to establish safe working procedures, especially during tasks requiring machine access when power must be securely controlled to avoid accidental activation.

  • Noise Management: By referencing noise emission standards, textile plants benefit from reduced occupational noise exposure, contributing to healthier work environments.

Related Standards

  • ISO 12100, Safety of machinery - General principles for design - Risk assessment and risk reduction: Fundamental for understanding and implementing machine safety requirements.

  • ISO 9902 Series, Textile machinery - Noise test code: Provides methodologies for accurate noise measurement in textile machines, critical for both regulatory compliance and operator health.

  • ISO 23771, Textile machinery - Guide for reducing noise emission in machine design: Supports designers in minimizing noise pollution from textile machinery, improving workplace conditions.

  • ISO 11111 Parts 1, 2, 6, 7: Complementary parts of the ISO 11111 series addressing safety requirements across various types of textile machinery ensuring a comprehensive safety framework.

Implementing ISO 11111-3:2005/Amd 2:2016 aids textile machinery manufacturers and users in enhancing machine safety, reducing accident risks, and adhering to globally recognized safety best practices. This amendment is essential for anyone involved in the nonwoven textile machinery industry seeking to maintain a safe production environment and meet international compliance standards.

Frequently Asked Questions

ISO 11111-3:2005/Amd 2:2016 is a standard published by the International Organization for Standardization (ISO). Its full title is "Textile machinery - Safety requirements - Part 3: Nonwoven machinery - Amendment 2". This standard covers: Textile machinery - Safety requirements - Part 3: Nonwoven machinery - Amendment 2

Textile machinery - Safety requirements - Part 3: Nonwoven machinery - Amendment 2

ISO 11111-3:2005/Amd 2:2016 is classified under the following ICS (International Classification for Standards) categories: 59.120.99 - Other textile machinery. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO 11111-3:2005/Amd 2:2016 has the following relationships with other standards: It is inter standard links to ISO/TS 2963:2006, ISO 21597-2:2020, ISO 11111-3:2005. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

ISO 11111-3:2005/Amd 2:2016 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


INTERNATIONAL ISO
STANDARD 11111-3
First edition
2005-02-15
AMENDMENT 2
2016-05-15
Textile machinery — Safety
requirements —
Part 3:
Nonwoven machinery
AMENDMENT 2
Matériel pour l’industrie textile — Exigences de sécurité —
Partie 3: Machines de production de nontissés
AMENDEMENT 2
Reference number
ISO 11111-3:2005/Amd.2:2016(E)
©
ISO 2016
ISO 11111-3:2005/Amd.2:2016(E)

© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved

ISO 11111-3:2005/Amd.2:2016(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information.
The committee responsible for this document is ISO/TC 72, Textile machinery and accessories,
Subcommittee SC 8, Safety requirements for textile machinery.
ISO 11111-3:2005/Amd.2:2016(E)
Textile machinery — Safety requirements —
Part 3:
Nonwoven machinery
AMENDMENT 2
Page v, Introduction
Replace “ISO 12100-1” in the 3rd paragraph with “ISO 12100”.
Replace “ISO 14121-1” in the 5th paragraph with “ISO 12100”.
Page 1, Scope
Add the following sentence as the second paragraph:
This part of ISO 11111 is complemented by the type C standards ISO 9902-series with respect to
noise emission measurement and ISO 23771 with respect to measures for the reduction of noise
emissions.
Pages 1 to 4, Clauses 1 to 7
Throughout the text, replace all the dated references “ISO 11111-1:2005” with “ISO 11111-1:2016”.
Replace all the dated references to “ISO 11111-2:2005” with “ISO 11111-2:2005 (as amended by
ISO 11111-2:2005/Amd.1:2009 and ISO 11111-2:2005/Amd.2:2016)”.
Replace all the dated references to “ISO 11111-6
...


NORME ISO
INTERNATIONALE 11111-3
Première édition
2005-02-15
AMENDEMENT 2
2016-05-15
Matériel pour l’industrie textile —
Exigences de sécurité —
Partie 3:
Machines de production de nontissés
AMENDEMENT 2
Textile machinery — Safety requirements —
Part 3: Nonwoven machinery
AMENDMENT 2
Numéro de référence
ISO 11111-3:2005/Amd.2:2016(F)
©
ISO 2016
ISO 11111-3:2005/Amd.2:2016(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2016, Publié en Suisse
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – Tous droits réservés

ISO 11111-3:2005/Amd.2:2016(F)

Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est
en général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l’ISO participent également aux travaux.
L’ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier de prendre note des différents
critères d’approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir www.
iso.org/directives).
L’attention est appelée sur le fait que certains des éléments du présent document peuvent faire l’objet de
droits de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant
les références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de
l’élaboration du document sont indiqués dans l’Introduction et/ou dans la liste des déclarations de
brevets reçues par l’ISO (voir www.iso.org/brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un
engagement.
Pour une explication de la signification des termes et expressions spécifiques de l’ISO liés à
l’évaluation de la conformité, ou pour toute information au sujet de l’adhésion de l’ISO aux principes
de l’OMC concernant les obstacles techniques au commerce (OTC), voir le lien suivant: Avant-propos —
Informations supplémentaires.
Le comité chargé de l’élaboration du présent document est l'ISO/TC 72, Matériel pour l’industrie textile
et matériel connexe, sous-comité SC 8, Exigences de sécurité pour le matériel textile.
ISO 11111-3:2005/Amd.2:2016(F)
Matériel pour l’industrie textile — Exigences de sécurité —
Partie 3:
Machines de production de nontissés
AMENDEMENT 2
Page v, Introduction
ème
Remplacer la référence «ISO 12100-1» dans le 3 alinéa par la référence «ISO 12100».
ème
Remplacer la référence «ISO 14121-1» dans le 5 alinéa par la référence «ISO 12100».
Page 1, Domaine d’application
Ajouter la phrase suivante comme deuxième alinéa:
La présente partie de l’ISO 11111 est complétée par les normes de type C ISO 9902-serie en ce
qui concerne les mesures de bruit et ISO 23771 en ce qui concerne les mesures de réduction de
l’émission sonore.
Pages 1 à 5, Articles 1 à 7
Dans l’ensemble du texte, remplacer toutes les références datées «ISO 11111-1:2005» par la référence
«ISO 11111-1:2016».
Remplacer toutes les références datées «ISO 11111-2:2005» par «ISO 11111-2:2005 (amendé par
l’ISO 11111-2:2005/Amd.1:2009 et par l’ISO 11111-2:2005/Amd.2:2016)».
Remplacer toutes les références datées «ISO 11111-6:2005» par «ISO 11111-6:2005 (amendé par
l’ISO 11111-6:2005/A
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...