ISO 10360-4:2000/Cor 1:2002
(Corrigendum)Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode - Technical Corrigendum 1
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode - Technical Corrigendum 1
Spécification géométrique des produits (GPS) — Essais de réception et de vérification périodique des machines à mesurer tridimensionnelles (MMT) — Partie 4: MMT utilisées en mode de mesure par scanning — Rectificatif technique 1
Specifikacije geometrijskih veličin izdelka - Preskusi za sprejemljivost in ponovno verifikacijo koordinatnih merilnih strojev - 4. del: Koordinatni merilni stroji, uporabljeni kot merilni skenerji - Tehnični popravek 1
General Information
Relations
Frequently Asked Questions
ISO 10360-4:2000/Cor 1:2002 is a corrigendum published by the International Organization for Standardization (ISO). Its full title is "Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode - Technical Corrigendum 1". This standard covers: Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode - Technical Corrigendum 1
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode - Technical Corrigendum 1
ISO 10360-4:2000/Cor 1:2002 is classified under the following ICS (International Classification for Standards) categories: 17.040.30 - Measuring instruments. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 10360-4:2000/Cor 1:2002 has the following relationships with other standards: It is inter standard links to ISO 9787:2013, ISO 10360-4:2000, ISO 10360-5:2020; is excused to SIST ISO 10360-4:2002, ISO 10360-4:2000. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 10360-4:2000/Cor 1:2002 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Standards Content (Sample)
STANDARDSpecifikacije geometrijskih veličin izdelka - Preskusi za sprejemljivost in ponovno verifikacijo koordinatnih merilnih strojev - 4. del: Koordinatni merilni stroji, uporabljeni kot merilni skenerji - Tehnični popravek 1Geometrical Product Specifications (GPS) -
Acceptance and reverification tests for coordinate
measuring machines (CMM) - Part 4: CMMs used in
scanning measuring mode - Technical Corrigendum 1©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST ISO 10360-4:2002/TC 1:2003(en)ICS17.040.30
ICS
17.040.30 Ref. No. ISO 10360-4:2000/Cor.1:2002(E)©
ISO 2002 – All rights reserved Published in Switzerland
INTERNATIONAL STANDARD ISO 10360-4:2000 TECHNICAL CORRIGENDUM 1 Published 2002-11-15 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION •
• ORGANISATION INTERNATIONALE DE NORMALISATION
Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 4: CMMs used in scanning measuring mode TECHNICAL CORRIGENDUM 1 Spécification géométrique des produits (GPS) — Essais de réception et de vérification périodique des machines à mesurer tridimensionnelles (MMT) — Partie 4: MMT utilisées en mode de mesure par scanning RECTIFICATIF TECHNIQUE 1 Technical Corrigendum 1 to ISO 10360-4:2000 was prepared by Technical Committee ISO/TC 213, Dimensional and geometrical product specifications and verification.
Throughout ISO 10360-4:2000, symbols Replace the symbols τ, MPTτ, Tij and MPETij by the following symbols, respectively, wherever the former appear in the document. “τij”
“MPTτij” “Tij” “MPETij” SIST ISO 10360-4:2002/TC 1:2003
ISO 10360-4:2000/Cor.1:2002(E) 2 ©
ISO 2002 – All rights reserved Page 5, 5.4 Replace the penultimate paragraph of 5.4 with the following. “Record the time(s) for scanning test(s), τij, from the intermediate point at the start of the first scan sequence to the intermediate point at the end of the fourth scan sequence.” Page 5, 6.1 Replace 6.1 c) with the following. “c) the time(s) taken for
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...