iTeh Standards logo
EURUSD
Your shopping cart is empty.
ISO

ISO 5347-0:1987/Cor 2:1993

(Corrigendum)

Methods for the calibration of vibration and shock pick-ups - Part 0: Basic concepts - Technical Corrigendum 2

Methods for the calibration of vibration and shock pick-ups - Part 0: Basic concepts - Technical Corrigendum 2

Méthodes pour l'étalonnage des capteurs de vibrations et de chocs — Partie 0: Concepts de base — Rectificatif technique 2

General Information

Status
Withdrawn
Publication Date
23-Jun-1993
Withdrawal Date
23-Jun-1993
ICS
17.160 - Vibrations, shock and vibration measurements
Technical Committee
ISO/TC 108 - Mechanical vibration, shock and condition monitoring
Drafting Committee
ISO/TC 108 - Mechanical vibration, shock and condition monitoring
Current Stage
9599 - Withdrawal of International Standard
Start Date
15-Oct-1998
Completion Date
13-Dec-2025
Ref Project

Relations

Corrects
ISO 5347-0:1987 - Methods for the calibration of vibration and shock pick-ups - Part 0: Basic concepts
Effective Date
06-Jun-2022
Revised
ISO 16063-1:1998 - Methods for the calibration of vibration and shock transducers - Part 1: Basic concepts
Effective Date
16-Oct-2025
Child
ISO 5347-0:1987 - Methods for the calibration of vibration and shock pick-ups - Part 0: Basic concepts
Effective Date
15-Apr-2008
ISO 5347-0:1987/Cor 2:1993ISO 5347-0:1987/Cor 2:1993
PreviousNext
Standard
ISO 5347-0:1987/Cor 2:1993
English language
1 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 5347-0:1987/Cor 2:1993ISO 5347-0:1987/Cor 2:1993
PreviousNext
Standard
ISO 5347-0:1987/Cor 2:1993
French language
1 pages
sale 15% off
Preview
sale 15% off
Preview

Frequently Asked Questions

ISO 5347-0:1987/Cor 2:1993 is a standard published by the International Organization for Standardization (ISO). Its full title is "Methods for the calibration of vibration and shock pick-ups - Part 0: Basic concepts - Technical Corrigendum 2". This standard covers: Methods for the calibration of vibration and shock pick-ups - Part 0: Basic concepts - Technical Corrigendum 2

Methods for the calibration of vibration and shock pick-ups - Part 0: Basic concepts - Technical Corrigendum 2

ISO 5347-0:1987/Cor 2:1993 is classified under the following ICS (International Classification for Standards) categories: 17.160 - Vibrations, shock and vibration measurements. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO 5347-0:1987/Cor 2:1993 has the following relationships with other standards: It is inter standard links to ISO 5347-0:1987, ISO 16063-1:1998; is excused to ISO 5347-0:1987. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

You can purchase ISO 5347-0:1987/Cor 2:1993 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.

Standards Content (Sample)


I_
BC AB
1 INTERNATIONAL STANDARD IS0 5347-0:1987
TECHNICAL CORRIGENDUM 2
Published 1993-Oô-1 5
Methods for the calibration of vibration and shock
pick-ups -
1 Part O:
Basic concepts
~ lrn -
I
TECHNICAL CORRIGENDUM 2
Méthodes pour l’étalonnage des capteurs de vibrations et de chocs -
Partie O: Concepts de base
RECTIFICATIF TECHNIQUE 2
Technical corrigendum 2 to International Standard IS0 5347-01987 was prepared by Technical Committee ISOflC 108,
...


NORME INTERNATIONALE IS0 5347a.1987
RECTIFICATIF TECHNIQUE 2
Publié 1993-06-15
Méthodes pour l'étalonnage des capteurs de vibrations et de
chocs -
Partie O:
Concepts de base
O
RECTIFICATIF TECHNIQUE 2
Methods for the calibration of vibration and shock pick-ups - I
Parr O: Basic concepts
TECHNICAL CORRIGENDUM 2
Le Rectificatif technique 2 à la Norme internationale IS0 5347-01987 a été élaboré par le comité technique ISOflC 108,
Vibrations er ch
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

ISO
ISO 16063-1:1998/Amd 2:2025(Amendment)
Methods for the calibration of vibration and shock transducers - Part 1: Basic concepts - Amendment 2
  • Standard
    1 page
    English language
    sale 15% off
ISO
ISO 16063-31:2009/Amd 1:2025(Amendment)
Methods for the calibration of vibration and shock transducers - Part 31: Testing of transverse vibration sensitivity - Amendment 1
  • Standard
    4 pages
    English language
    sale 15% off
ISO
ISO 16063-21:2003/Amd 2:2024(Amendment)
Methods for the calibration of vibration and shock transducers - Part 21: Vibration calibration by comparison to a reference transducer - Amendment 2
  • Standard
    4 pages
    English language
    sale 15% off
ISO
ISO 5348:2021(Main)
Mechanical vibration and shock - Mechanical mounting of accelerometers

This document specifies the important technical properties of the different methods for mounting vibration transducers and describes recommended practices. It also shows examples of how accelerometer mounting can influence frequency response and gives examples of how other influences can affect the fidelity of the representation of actual motion in the structure being observed. This document applies to the contacting type of accelerometer which is currently in wide use. It is applicable to both uniaxial and multi-axial transducers. This document can also be applied to velocity transducers. This document enables the user to estimate the limitations of a mounting and consequent potential measurement deviations. Transducer mounting issues are not the only problem that can affect the validity of acceleration measurement. Other such problems include, amongst others: transverse movements, alignment of the transducer, base bending, cable movement, temperature changes, electric and magnetic fields, cable whip and mounting torque. Issues other than mounting and their possible effects are outside the scope of this document.

  • Standard
    21 pages
    English language
    sale 15% off
ISO
ISO 16063-34:2019(Main)
Methods for the calibration of vibration and shock transducers - Part 34: Testing of sensitivity at fixed temperatures

This document details specifications for the instrumentation and methods to be used for testing fixed temperature sensitivity of vibration transducers. It applies to rectilinear velocity and acceleration transducers. The methods specified use both a comparison to a reference transducer and an absolute measurement by laser interferometer. This document is applicable for a frequency range from 10 Hz to 3 kHz (method-dependent), a dynamic range from 1 m/s2 to 100 m/s2 (frequency-dependent) and a temperature range from ?190 °C to 800 °C (method-dependent). Although it is possible to achieve these ranges among all the described systems, generally each has limitations within them. Method 1 (using a laser interferometer) is applicable to magnitude of sensitivity and phase calibration in the frequency range 10 Hz to 3 kHz at fixed temperatures (see Clause 7). Method 2 (using a reference transducer inside a chamber whose temperature limit is ?70 °C to 500 °C) can be used for magnitude of sensitivity and phase calibration in the frequency range 10 Hz to 1 kHz at fixed temperatures (see Clause 8). Method 3 (using a reference transducer outside the chamber) can only be used for the determination of the temperature response of complex sensitivity over a certain temperature range (see Clause 9). NOTE Method 1 and Method 2 can provide the deviation of complex sensitivity over a certain temperature range if the calibration is also done at the reference temperature (room temperature 23 °C ± 5 °C). To ensure the consistency of the use and test condition, the transducer, its cable and the conditioning amplifier are intended to be considered as a single unit and tested together.

  • Standard
    16 pages
    English language
    sale 15% off
ISO
ISO 7626-5:2019(Main)
Mechanical vibration and shock - Experimental determination of mechanical mobility - Part 5: Measurements using impact excitation with an exciter which is not attached to the structure

This document specifies procedures for measuring mechanical mobility and other frequency-response functions of structures excited by means of an impulsive force generated by an exciter which is not attached to the structure under test. It is applicable to the measurement of mobility, accelerance or dynamic compliance, either as a driving point measurement or as a transfer measurement, using impact excitation. Other excitation methods, such as step relaxation and transient random, lead to signal-processing requirements similar to those of impact data. However, such methods are outside the scope of this document because they involve the use of an exciter which is attached to the structure. The signal analysis methods covered are all based on the discrete Fourier transform (DFT), which is performed mostly by a fast Fourier transform (FFT) algorithm. This restriction in scope is based solely on the wide availability of equipment which implements these methods and on the large base of experience in using these methods. It is not intended to exclude the use of other methods currently under development. Impact excitation is also widely used to obtain uncalibrated frequency-response information. For example, a quick impact test which obtains approximate natural frequencies and mode shapes can be quite helpful in planning a random or sinusoidal test for accurate mobility measurements. These uses of impact excitation to obtain qualitative results can be a first stage for mobility measurements. This document is limited to the use of impact excitation techniques for making accurate mobility measurements.

  • Standard
    28 pages
    English language
    sale 15% off
ISO
ISO 16063-44:2018(Main)
Methods for the calibration of vibration and shock transducers - Part 44: Calibration of field vibration calibrators

This document specifies the instrumentation and procedure to be used for performing calibration of field vibration calibrators (FVCs). It is not applicable to FVCs used for the calibration of transducers. These are covered by ISO 16063‑21. Procedures and requirements of in situ calibration by FVC are beyond the scope of this document. Annex B provides more information on the application of FVC.

  • Standard
    10 pages
    English language
    sale 15% off
ISO
ISO 2041:2018(Main)
Mechanical vibration, shock and condition monitoring - Vocabulary

This document defines terms and expressions unique to the areas of mechanical vibration, shock and condition monitoring.

  • Standard
    56 pages
    English language
    sale 15% off
  • Standard
    57 pages
    French language
    sale 15% off
ISO
ISO 18437-6:2017(Main)
Mechanical vibration and shock - Characterization of the dynamic mechanical properties of visco-elastic materials - Part 6: Time-temperature superposition

ISO 18437-6:2017 specifies a standard method for the acquisition and analysis of data obtained using the test methods found in ISO 18437‑1 to ISO 18437‑5, ISO 6721‑4 to ISO 6721‑7 and ISO 6721‑12. ISO 18437-6:2017 is applicable to visco-elastic materials that are thermorheologically simple and that have been tested at equilibrium state for every temperature.

  • Standard
    24 pages
    English language
    sale 15% off
ISO
ISO 16063-33:2017(Main)
Methods for the calibration of vibration and shock transducers - Part 33: Testing of magnetic field sensitivity

ISO 16063-33:2017 specifies a method, procedures and the specifications for an apparatus to be used for testing the magnetic field sensitivity of vibration and shock transducers. It is applicable to all kinds of vibration and shock transducers. ISO 16063-33:2017 is applicable for a reference test sinusoidal magnetic field having a root mean square (r.m.s.) value more than 10?3 T at 50 Hz or 60 Hz. Typically, a test magnetic field of 10?2 T at 50 Hz or 60 Hz is used. ISO 16063-33:2017 is primarily intended for those who are required to meet internationally standardized methods for the measurement of magnetic field sensitivity under laboratory conditions. NOTE 1 T (tesla) = 1 Wb/m2.

  • Standard
    14 pages
    English language
    sale 15% off