ISO 9506-1:2003
(Main)Industrial automation systems — Manufacturing Message Specification — Part 1: Service definition
Industrial automation systems — Manufacturing Message Specification — Part 1: Service definition
ISO 9506 is an Application Layer communication specification, in accord with the OSI communication model. It provides a set of services appropriate to communications between automated equipment and systems that interrogate or control them. Its description of interactions follow the client server model. It is suitable for use over any network that supports full-duplex, reliable communication, such as the Internet. ISO 9506-1:2003 provides a set of abstract models of information objects that may be found in such automated systems, and the specifications of a set of abstract services that operate on these models. Part 2 provides the protocol for the messages to be exchanged between client and server to realize support for the abstract services defined in Part 1.
Systèmes d'automatisation industrielle — Spécification de messagerie industrielle — Partie 1: Définition des services
General Information
Relations
Buy Standard
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 9506-1
Second edition
2003-08-01
Industrial automation systems —
Manufacturing Message Specification —
Part 1:
Service definition
Systèmes d'automatisation industrielle — Spécification de messagerie
industrielle —
Partie 1: Définition des services
Reference number
ISO 9506-1:2003(E)
©
ISO 2003
---------------------- Page: 1 ----------------------
ISO 9506-1:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2003 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 9506-1: 2003(E)
Contents Page
Foreword . xi
Introduction . xii
1 Scope . 1
2 Normative references . 1
3 Definitions . 2
3.1 Reference Model definitions . 2
3 .2 Service C onvent ion def init ions . 3
3.3 Abstract Syntax Notation definitions . 3
3.4 Other definitions . 3
4 Abbreviations . 6
5 Conventions . 7
5.1 Base of Numeric Values . 7
5.2 Object modelling . 7
5.3 Specialisation of MMS . 8
5.4 Service Parameter Description . 9
5.5 Invocation Identifier on Service Primitives . 11
5.6 List Of Modifier on Service Primitives . 11
5.7 Addressing in MMS . 11
5.8 Service Conventions . 11
5.9 Calling and Called MMS-user . 11
5.10 Sending and Receiving MMS-user and MMPM . 12
5.11 Requesting and Responding MMS-user . 12
5.12 Client and Server of a Service . 12
5.13 Relationship of Object Models to Service Tables . 13
6 MMS in the OSI Environment . 13
6.1 Information Processing Tasks and Real Systems . 13
6.2 Application Processes . 13
6.3 Interaction of Application Processes . 13
6.4 Interaction of Application Processes in OSI . 14
6.5 Structure of Application Entities . 14
6.6 Addressing of Application Entities . 14
6.7 Application Context . 15
6.8 Presentation Context, Abstract Syntaxes, and Transfer Syntaxes . 15
6.9 MMS requirements of the communication system . 15
7 The Virtual Manufacturing Device . 21
7.1 Introduction . 21
7.2 The Structure of a VMD . 22
7.3 Transactions . 30
7.4 Specification of Named objects . 32
7.5 Object Name structure . 35
7.6 Object Class structure . 36
8 Environment And General Management services . 36
8.1 Introduction and Models . 36
8.2 Initiate service . 45
8.3 Conclude service . 51
8.4 Abort service . 52
8.5 Cancel service . 53
8.6 Reject service . 55
9 Conditioned service response . 59
9.1 Introduction and Models . 59
9.2 AccessCondition parameter . 65
iii
© ISO 2003 – All rights reserved
---------------------- Page: 3 ----------------------
ISO 9506-1: 2003(E)
9.3 DefineAccessControlList service . 67
9.4 GetAccessControlListAttributes service . 68
9.5 ReportAccessControlledObjects service . 71
9.6 DeleteAccessControlList service . 72
9.7 ChangeAccessControl service . 73
10 VMD Support Services . 77
10.1 Introduction . 77
10.2 Status Response parameter . 77
10.3 Status service . 78
10.4 UnsolicitedStatus service . 79
10.5 GetNameList service . 79
10.6 Identify service . 81
10.7 Rename service . 82
10.8 GetCapabilityList service . 84
10.9 VMDStop service . 85
10.10 VMDReset service . 86
11 Domain Management Services . 87
11.1 Introduction and Models . 87
11.2 InitiateDownloadSequence service . 93
11.3 DownloadSegment service . 95
11.4 TerminateDownloadSequence service . 97
11.5 InitiateUploadSequence service . 98
11.6 UploadSegment service . 100
11.7 TerminateUploadSequence service . 101
11.8 RequestDomainDownload service . 102
11.9 RequestDomainUpload service . 104
11.10 LoadDomainContent service . 105
11.11 StoreDomainContent service . 107
11.12 DeleteDomain service . 110
11.13 GetDomainAttributes service . 111
12 Program Invocation Management Services . 113
12.1 Introduction and Models . 113
12.2 CreateProgramInvocation service . 120
12.3 DeleteProgramInvocation service . 123
12.4 Start service . 124
12.5 Stop service . 128
12.6 Resume service . 129
12.7 Reset service . 132
12.8 Kill service . 133
12.9 GetProgramInvocationAttributes service . 134
12.10 Select service . 137
12.11 AlterProgramInvocationAttributes service . 139
12.12 ReconfigureProgramInvocation service . 141
13 Unit Control . 143
13.1 Introduction and Models . 143
13.2 Control Element . 144
13.3 InitiateUnitControlLoad service . 145
13.4 UnitControlLoadSegment service . 147
13.5 UnitControlUpload service . 149
13.6 StartUnitControl service . 151
13.7 StopUnitControl service . 152
13.8 CreateUnitControl service . 154
13.9 AddToUnitControl service . 155
13.10 RemoveFromUnitControl service . 156
13.11 GetUnitControlAttributes service . 157
13.12 LoadUnitControlFromFile service . 159
13.13 StoreUnitControlToFile service . 160
13.14 DeleteUnitControl service . 161
14 Variable Access Services . 163
iv
© ISO 2003 – All rights reserved
---------------------- Page: 4 ----------------------
ISO 9506-1: 2003(E)
14.1 The MMS Variable Access Model . 164
14.2 Specification of Types . 171
14.3 Specification of Alternate Access . 175
14.4 Specification of Data Values . 179
14.5 Specification of Access to Variables . 181
14.6 Read service . 184
14.7 Write service . 185
14.8 InformationReport service . 187
14.9 GetVariableAccessAttributes service . 188
14.10 DefineNamedVariable service . 190
14.11 DeleteVariableAccess service . 192
14.12 DefineNamedVariableList service . 194
14.13 GetNamedVariableListAttributes service . 196
14.14 DeleteNamedVariableList service . 197
14.15 DefineNamedType service . 199
14.16 GetNamedTypeAttributes service . 201
14.17 DeleteNamedType service . 202
14.18 Conformance . 204
14.19 Guidance To Implementors . 205
15 Data Exchange Management Services . 206
15.1 The Data Exchange management model . 206
15.2 ExchangeData service . 207
15.3 GetDataExchangeAttributes service . 209
16 Semaphore Management Services . 210
16.1 The Semaphore Management Model . 210
16.2 TakeControl service . 217
16.3 RelinquishControl service . 221
16.4 DefineSemaphore service . 222
16.5 DeleteSemaphore service . 224
16.6 ReportSemaphoreStatus service . 226
16.7 ReportPoolSemaphoreStatus service . 227
16.8 ReportSemaphoreEntryStatus service . 229
16.9 AttachToSemaphore Modifier . 232
16.10 Conformance . 234
17 Operator Communication services . 235
17.1 The Operator Communications Model . 235
17.2 Input service . 237
17.3 Output service . 239
18 Event Management services . 241
18.1 Event Detection and Notification . 242
18.2 TriggerEvent service . 247
18.3 EventNotification service . 248
18.4 AcknowledgeEventNotification service . 250
18.5 GetAlarmSummary service . 252
18.6 GetAlarmEnrollmentSummary service . 256
18.7 Attach To Event Condition Modifier . 260
18.8 Conformance Requirements Unique to Event Management . 262
19 Event Condition services . 263
19.1 Event Conditions . 263
19.2 DefineEventCondition service . 268
19.3 DeleteEventCondition service . 271
19.4 GetEventConditionAttributes service . 273
19.5 ReportEventConditionStatus service . 275
19.6 AlterEventConditionMonitoring service . 277
20 Event Action services . 279
20.1 Event Actions . 279
20.2 DefineEventAction service . 280
20.3 DeleteEventAction service . 282
v
© ISO 2003 – All rights reserved
---------------------- Page: 5 ----------------------
ISO 9506-1: 2003(E)
20.4 GetEventActionAttributes service . 284
20.5 ReportEventActionStatus service . 285
21 Event Enrollment services . 287
21.1 Event Enrollments . 287
21.2 DefineEventEnrollment service . 295
21.3 DeleteEventEnrollment service . 299
21.4 GetEventEnrollmentAttributes service . 302
21.5 ReportEventEnrollmentStatus service . 306
21.6 AlterEventEnrollment service . 308
22 Event Condition List services . 311
22.1 Event Condition Lists . 311
22.2 DefineEventConditionList service . 312
22.3 DeleteEventConditionList service . 314
22.4 AddEventConditionListReference service . 316
22.5 RemoveEventConditionListReference service . 318
22.6 GetEventConditionListAttributes service . 321
22.7 ReportEventConditionListStatus service . 322
22.8 AlterEventConditionListMonitoring service . 324
23 Journal Management services . 326
23.1 The Journal Management Model . 326
23.2 ReadJournal service . 328
23.3 WriteJournal service . 336
23.4 InitializeJournal service . 339
23.5 ReportJournalStatus service . 340
23.6 CreateJournal service . 342
23.7 DeleteJournal service . 343
23.8 Conformance Requirements Unique to Journals . 344
24 Errors . 344
24.1 Error Type . 344
24.2 Description of structure of generic error type: . 345
24.3 Additional Code . 351
24.4 Additional Detail . 351
24.5 Modifier Position . 351
25 MMS Standardized Names . 351
25.1 Introduction . 351
25.2 Unique Name Assignment Mechanism . 352
25.3 MMS Standardized Names . 352
25.4 End of Module . 355
26 Conformance . 355
26.1 Introduction . 355
26.2 Conformance Building Blocks (CBBs)) . 355
26.3 Static Conformance Requirements . 357
26.4 Calling MMS-user Conformance Requirements . 357
26.5 Called MMS-user Conformance Requirements . 357
26.6 Server Conformance Requirements . 357
26.7 Client Conformance Requirements . 358
26.8 Parameter CBB Conformance Requirements . 359
26.9 Dynamic Conformance . 360
Annex A (normative) Relationship of the VMD to an OSI Communication System . 361
A.1 Introduction . 361
A.2 Addressing of Application Entities . 362
A.3 Conformance Requirements . 362
Annex B (normative) Requirements for Companion Standards . 363
B.1 Introduction . 363
B.2 Scope . 363
B.3 Requirements . 363
vi
© ISO 2003 – All rights reserved
---------------------- Page: 6 ----------------------
ISO 9506-1: 2003(E)
B.4 Outline of an MMS Companion Standard . 363
Annex C (normative) File Access service . 369
C.1 ObtainFile service . 369
Annex D (informative) File Management services . 371
D.1 Introduction . 371
D.2 The MMS File Model . 371
D.3 FileOpen service . 373
D.4 FileRead service . 374
D.5 FileClose service . 375
D.6 FileRename service . 376
D.7 FileDelete service . 378
D.8 FileDirectory service . 379
D.9 File Attributes parameter . 381
D.10 Additional Specification for the Conclude Service . 381
Annex E (informative) Scattered Access . 383
E.1 Introduction . 383
E.2 Variable Specification parameter . 385
E.3 DefineScatteredAccess service . 386
E.4 GetScatteredAccessAttributes service . 388
E.5 DeleteVariableAccess service . 390
E.6 DefineNamedVariableList service . 390
E.7 GetNamedVariableListAttributes service . 391
E.8 DeleteNamedVariableList service . 391
Annex F (informative) MMS on TCP/IP . 392
F.1 Introduction . 392
F.2 General Internet Environments . 392
F.3 References . 392
Index . 393
Figures
Figure 1 - Relationships of Client and Server, Requesting and Responding MMS-user, and Sending
and Receiving MMPM . 12
Figure 2 - M-ASSOCIATE service . 16
Figure 3 - M-RELEASE service . 18
Figure 4 - M-DATA service . 19
Figure 5 - M-U-ABORT service . 20
Figure 6 - M-P-ABORT service . 21
Figure 7 - Environment Management State Diagram . 37
Figure 8 - Domain State Diagram . 91
Figure 9 - Upload State Machines . 93
Figure 10 - LoadDomainContent . 105
Figure 11 - StoreDomainContent . 108
Figure 12 - Program Invocation State Diagram . 119
Figure 13 - Semaphore Entry model . 215
Figure 14 - Token Semaphore model . 216
Figure 15 - Pool Semaphore model . 217
Figure 16 - Operator Station State Diagram . 237
Figure 17 - Relationship Between Event Management Objects . 242
Figure 18 - Network-triggered Event Condition State Diagram . 266
Figure 19 - Monitored Event Condition State Diagram . 267
Figure 20 - Event Action State Diagram . 286
Figure 21 - State Diagram for &alarmAcknowledgmentRule = none . 292
Figure 22 - State Diagram for &alarmAcknowledgmentRule = simple . 293
Figure 23 - State Diagram for &alarmAcknowledgmentRule = ack-active . 294
Figure 24 - State Diagram for &alarmAcknowledgmentRule = ack-all. 295
Figure A.1 - The MMS Server Application Process . 361
Figure D.1 - File Read State Machine . 372
vii
© ISO 2003 – All rights reserved
---------------------- Page: 7 ----------------------
ISO 9506-1: 2003(E)
Tables
Table 1 - M-ASSOCIATE service . 16
Table 2 - M-Release service parameters . 18
Table 3 - M-Data service parameters . 19
Table 4 - M-U-Abort service parameters . 20
Table 5 - M-P-Abort service parameters . 21
Table 6 - Local control . 29
Table 7 - Name Class and Scope . 33
Table 8 - Object Name . 35
Table 9 - Object Class . 36
Table 10 - Initiate service . 45
Table 11 - Conclude service . 51
Table 12 - Abort service . 53
Table 13 - Cancel service . 54
Table 14 - Reject service . 55
Table 15 - Access Condition parameter . 66
Table 16 - DefineAccessControlList service . 67
Table 17 - GetAccessControlListAttributes service . 69
Table 18 - ReportAccessControlledObjects service . 71
Table 19 - DeleteAccessControlList service . 72
Table 20 - ChangeAccessControl service . 74
Table 21 - Status Response parameter . 77
Table 22 - Status service . 78
Table 23 - UnsolicitedStatus service . 79
Table 24 - GetNameList service . 80
Table 25 - Identify service . 81
Table 26 - Rename service . 83
Table 27 - GetCapabilityList service . 84
Table 28 - VMDStop service . 85
Table 29 - VMD attributes after VMDStop . 86
Table 30 - VMDReset service . 86
Table 31 - InitiateDownloadSequence service . 94
Table 32 - DownloadSegment service . 96
Table 33 - TerminateDownloadSequence service . 97
Table 34 - InitiateUploadSequence service . 99
Table 35 - UploadSegment service . 100
Table 36 - TerminateUploadSequence service . 101
Table 37 - RequestDomainDownload service . 102
Table 38 - RequestDomainUpload service . 104
Table 39 - LoadDomainContent service . 106
Table 40 - Store
...
INTERNATIONAL ISO
STANDARD 9506-1
Second edition
2003-08-01
Industrial automation systems —
Manufacturing Message Specification —
Part 1:
Service definition
Systèmes d'automatisation industrielle — Spécification de messagerie
industrielle —
Partie 1: Définition des services
Reference number
ISO 9506-1:2003(E)
©
ISO 2003
---------------------- Page: 1 ----------------------
ISO 9506-1:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2003 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 9506-1: 2003(E)
Contents Page
Foreword . xi
Introduction . xii
1 Scope . 1
2 Normative references . 1
3 Definitions . 2
3.1 Reference Model definitions . 2
3 .2 Service C onvent ion def init ions . 3
3.3 Abstract Syntax Notation definitions . 3
3.4 Other definitions . 3
4 Abbreviations . 6
5 Conventions . 7
5.1 Base of Numeric Values . 7
5.2 Object modelling . 7
5.3 Specialisation of MMS . 8
5.4 Service Parameter Description . 9
5.5 Invocation Identifier on Service Primitives . 11
5.6 List Of Modifier on Service Primitives . 11
5.7 Addressing in MMS . 11
5.8 Service Conventions . 11
5.9 Calling and Called MMS-user . 11
5.10 Sending and Receiving MMS-user and MMPM . 12
5.11 Requesting and Responding MMS-user . 12
5.12 Client and Server of a Service . 12
5.13 Relationship of Object Models to Service Tables . 13
6 MMS in the OSI Environment . 13
6.1 Information Processing Tasks and Real Systems . 13
6.2 Application Processes . 13
6.3 Interaction of Application Processes . 13
6.4 Interaction of Application Processes in OSI . 14
6.5 Structure of Application Entities . 14
6.6 Addressing of Application Entities . 14
6.7 Application Context . 15
6.8 Presentation Context, Abstract Syntaxes, and Transfer Syntaxes . 15
6.9 MMS requirements of the communication system . 15
7 The Virtual Manufacturing Device . 21
7.1 Introduction . 21
7.2 The Structure of a VMD . 22
7.3 Transactions . 30
7.4 Specification of Named objects . 32
7.5 Object Name structure . 35
7.6 Object Class structure . 36
8 Environment And General Management services . 36
8.1 Introduction and Models . 36
8.2 Initiate service . 45
8.3 Conclude service . 51
8.4 Abort service . 52
8.5 Cancel service . 53
8.6 Reject service . 55
9 Conditioned service response . 59
9.1 Introduction and Models . 59
9.2 AccessCondition parameter . 65
iii
© ISO 2003 – All rights reserved
---------------------- Page: 3 ----------------------
ISO 9506-1: 2003(E)
9.3 DefineAccessControlList service . 67
9.4 GetAccessControlListAttributes service . 68
9.5 ReportAccessControlledObjects service . 71
9.6 DeleteAccessControlList service . 72
9.7 ChangeAccessControl service . 73
10 VMD Support Services . 77
10.1 Introduction . 77
10.2 Status Response parameter . 77
10.3 Status service . 78
10.4 UnsolicitedStatus service . 79
10.5 GetNameList service . 79
10.6 Identify service . 81
10.7 Rename service . 82
10.8 GetCapabilityList service . 84
10.9 VMDStop service . 85
10.10 VMDReset service . 86
11 Domain Management Services . 87
11.1 Introduction and Models . 87
11.2 InitiateDownloadSequence service . 93
11.3 DownloadSegment service . 95
11.4 TerminateDownloadSequence service . 97
11.5 InitiateUploadSequence service . 98
11.6 UploadSegment service . 100
11.7 TerminateUploadSequence service . 101
11.8 RequestDomainDownload service . 102
11.9 RequestDomainUpload service . 104
11.10 LoadDomainContent service . 105
11.11 StoreDomainContent service . 107
11.12 DeleteDomain service . 110
11.13 GetDomainAttributes service . 111
12 Program Invocation Management Services . 113
12.1 Introduction and Models . 113
12.2 CreateProgramInvocation service . 120
12.3 DeleteProgramInvocation service . 123
12.4 Start service . 124
12.5 Stop service . 128
12.6 Resume service . 129
12.7 Reset service . 132
12.8 Kill service . 133
12.9 GetProgramInvocationAttributes service . 134
12.10 Select service . 137
12.11 AlterProgramInvocationAttributes service . 139
12.12 ReconfigureProgramInvocation service . 141
13 Unit Control . 143
13.1 Introduction and Models . 143
13.2 Control Element . 144
13.3 InitiateUnitControlLoad service . 145
13.4 UnitControlLoadSegment service . 147
13.5 UnitControlUpload service . 149
13.6 StartUnitControl service . 151
13.7 StopUnitControl service . 152
13.8 CreateUnitControl service . 154
13.9 AddToUnitControl service . 155
13.10 RemoveFromUnitControl service . 156
13.11 GetUnitControlAttributes service . 157
13.12 LoadUnitControlFromFile service . 159
13.13 StoreUnitControlToFile service . 160
13.14 DeleteUnitControl service . 161
14 Variable Access Services . 163
iv
© ISO 2003 – All rights reserved
---------------------- Page: 4 ----------------------
ISO 9506-1: 2003(E)
14.1 The MMS Variable Access Model . 164
14.2 Specification of Types . 171
14.3 Specification of Alternate Access . 175
14.4 Specification of Data Values . 179
14.5 Specification of Access to Variables . 181
14.6 Read service . 184
14.7 Write service . 185
14.8 InformationReport service . 187
14.9 GetVariableAccessAttributes service . 188
14.10 DefineNamedVariable service . 190
14.11 DeleteVariableAccess service . 192
14.12 DefineNamedVariableList service . 194
14.13 GetNamedVariableListAttributes service . 196
14.14 DeleteNamedVariableList service . 197
14.15 DefineNamedType service . 199
14.16 GetNamedTypeAttributes service . 201
14.17 DeleteNamedType service . 202
14.18 Conformance . 204
14.19 Guidance To Implementors . 205
15 Data Exchange Management Services . 206
15.1 The Data Exchange management model . 206
15.2 ExchangeData service . 207
15.3 GetDataExchangeAttributes service . 209
16 Semaphore Management Services . 210
16.1 The Semaphore Management Model . 210
16.2 TakeControl service . 217
16.3 RelinquishControl service . 221
16.4 DefineSemaphore service . 222
16.5 DeleteSemaphore service . 224
16.6 ReportSemaphoreStatus service . 226
16.7 ReportPoolSemaphoreStatus service . 227
16.8 ReportSemaphoreEntryStatus service . 229
16.9 AttachToSemaphore Modifier . 232
16.10 Conformance . 234
17 Operator Communication services . 235
17.1 The Operator Communications Model . 235
17.2 Input service . 237
17.3 Output service . 239
18 Event Management services . 241
18.1 Event Detection and Notification . 242
18.2 TriggerEvent service . 247
18.3 EventNotification service . 248
18.4 AcknowledgeEventNotification service . 250
18.5 GetAlarmSummary service . 252
18.6 GetAlarmEnrollmentSummary service . 256
18.7 Attach To Event Condition Modifier . 260
18.8 Conformance Requirements Unique to Event Management . 262
19 Event Condition services . 263
19.1 Event Conditions . 263
19.2 DefineEventCondition service . 268
19.3 DeleteEventCondition service . 271
19.4 GetEventConditionAttributes service . 273
19.5 ReportEventConditionStatus service . 275
19.6 AlterEventConditionMonitoring service . 277
20 Event Action services . 279
20.1 Event Actions . 279
20.2 DefineEventAction service . 280
20.3 DeleteEventAction service . 282
v
© ISO 2003 – All rights reserved
---------------------- Page: 5 ----------------------
ISO 9506-1: 2003(E)
20.4 GetEventActionAttributes service . 284
20.5 ReportEventActionStatus service . 285
21 Event Enrollment services . 287
21.1 Event Enrollments . 287
21.2 DefineEventEnrollment service . 295
21.3 DeleteEventEnrollment service . 299
21.4 GetEventEnrollmentAttributes service . 302
21.5 ReportEventEnrollmentStatus service . 306
21.6 AlterEventEnrollment service . 308
22 Event Condition List services . 311
22.1 Event Condition Lists . 311
22.2 DefineEventConditionList service . 312
22.3 DeleteEventConditionList service . 314
22.4 AddEventConditionListReference service . 316
22.5 RemoveEventConditionListReference service . 318
22.6 GetEventConditionListAttributes service . 321
22.7 ReportEventConditionListStatus service . 322
22.8 AlterEventConditionListMonitoring service . 324
23 Journal Management services . 326
23.1 The Journal Management Model . 326
23.2 ReadJournal service . 328
23.3 WriteJournal service . 336
23.4 InitializeJournal service . 339
23.5 ReportJournalStatus service . 340
23.6 CreateJournal service . 342
23.7 DeleteJournal service . 343
23.8 Conformance Requirements Unique to Journals . 344
24 Errors . 344
24.1 Error Type . 344
24.2 Description of structure of generic error type: . 345
24.3 Additional Code . 351
24.4 Additional Detail . 351
24.5 Modifier Position . 351
25 MMS Standardized Names . 351
25.1 Introduction . 351
25.2 Unique Name Assignment Mechanism . 352
25.3 MMS Standardized Names . 352
25.4 End of Module . 355
26 Conformance . 355
26.1 Introduction . 355
26.2 Conformance Building Blocks (CBBs)) . 355
26.3 Static Conformance Requirements . 357
26.4 Calling MMS-user Conformance Requirements . 357
26.5 Called MMS-user Conformance Requirements . 357
26.6 Server Conformance Requirements . 357
26.7 Client Conformance Requirements . 358
26.8 Parameter CBB Conformance Requirements . 359
26.9 Dynamic Conformance . 360
Annex A (normative) Relationship of the VMD to an OSI Communication System . 361
A.1 Introduction . 361
A.2 Addressing of Application Entities . 362
A.3 Conformance Requirements . 362
Annex B (normative) Requirements for Companion Standards . 363
B.1 Introduction . 363
B.2 Scope . 363
B.3 Requirements . 363
vi
© ISO 2003 – All rights reserved
---------------------- Page: 6 ----------------------
ISO 9506-1: 2003(E)
B.4 Outline of an MMS Companion Standard . 363
Annex C (normative) File Access service . 369
C.1 ObtainFile service . 369
Annex D (informative) File Management services . 371
D.1 Introduction . 371
D.2 The MMS File Model . 371
D.3 FileOpen service . 373
D.4 FileRead service . 374
D.5 FileClose service . 375
D.6 FileRename service . 376
D.7 FileDelete service . 378
D.8 FileDirectory service . 379
D.9 File Attributes parameter . 381
D.10 Additional Specification for the Conclude Service . 381
Annex E (informative) Scattered Access . 383
E.1 Introduction . 383
E.2 Variable Specification parameter . 385
E.3 DefineScatteredAccess service . 386
E.4 GetScatteredAccessAttributes service . 388
E.5 DeleteVariableAccess service . 390
E.6 DefineNamedVariableList service . 390
E.7 GetNamedVariableListAttributes service . 391
E.8 DeleteNamedVariableList service . 391
Annex F (informative) MMS on TCP/IP . 392
F.1 Introduction . 392
F.2 General Internet Environments . 392
F.3 References . 392
Index . 393
Figures
Figure 1 - Relationships of Client and Server, Requesting and Responding MMS-user, and Sending
and Receiving MMPM . 12
Figure 2 - M-ASSOCIATE service . 16
Figure 3 - M-RELEASE service . 18
Figure 4 - M-DATA service . 19
Figure 5 - M-U-ABORT service . 20
Figure 6 - M-P-ABORT service . 21
Figure 7 - Environment Management State Diagram . 37
Figure 8 - Domain State Diagram . 91
Figure 9 - Upload State Machines . 93
Figure 10 - LoadDomainContent . 105
Figure 11 - StoreDomainContent . 108
Figure 12 - Program Invocation State Diagram . 119
Figure 13 - Semaphore Entry model . 215
Figure 14 - Token Semaphore model . 216
Figure 15 - Pool Semaphore model . 217
Figure 16 - Operator Station State Diagram . 237
Figure 17 - Relationship Between Event Management Objects . 242
Figure 18 - Network-triggered Event Condition State Diagram . 266
Figure 19 - Monitored Event Condition State Diagram . 267
Figure 20 - Event Action State Diagram . 286
Figure 21 - State Diagram for &alarmAcknowledgmentRule = none . 292
Figure 22 - State Diagram for &alarmAcknowledgmentRule = simple . 293
Figure 23 - State Diagram for &alarmAcknowledgmentRule = ack-active . 294
Figure 24 - State Diagram for &alarmAcknowledgmentRule = ack-all. 295
Figure A.1 - The MMS Server Application Process . 361
Figure D.1 - File Read State Machine . 372
vii
© ISO 2003 – All rights reserved
---------------------- Page: 7 ----------------------
ISO 9506-1: 2003(E)
Tables
Table 1 - M-ASSOCIATE service . 16
Table 2 - M-Release service parameters . 18
Table 3 - M-Data service parameters . 19
Table 4 - M-U-Abort service parameters . 20
Table 5 - M-P-Abort service parameters . 21
Table 6 - Local control . 29
Table 7 - Name Class and Scope . 33
Table 8 - Object Name . 35
Table 9 - Object Class . 36
Table 10 - Initiate service . 45
Table 11 - Conclude service . 51
Table 12 - Abort service . 53
Table 13 - Cancel service . 54
Table 14 - Reject service . 55
Table 15 - Access Condition parameter . 66
Table 16 - DefineAccessControlList service . 67
Table 17 - GetAccessControlListAttributes service . 69
Table 18 - ReportAccessControlledObjects service . 71
Table 19 - DeleteAccessControlList service . 72
Table 20 - ChangeAccessControl service . 74
Table 21 - Status Response parameter . 77
Table 22 - Status service . 78
Table 23 - UnsolicitedStatus service . 79
Table 24 - GetNameList service . 80
Table 25 - Identify service . 81
Table 26 - Rename service . 83
Table 27 - GetCapabilityList service . 84
Table 28 - VMDStop service . 85
Table 29 - VMD attributes after VMDStop . 86
Table 30 - VMDReset service . 86
Table 31 - InitiateDownloadSequence service . 94
Table 32 - DownloadSegment service . 96
Table 33 - TerminateDownloadSequence service . 97
Table 34 - InitiateUploadSequence service . 99
Table 35 - UploadSegment service . 100
Table 36 - TerminateUploadSequence service . 101
Table 37 - RequestDomainDownload service . 102
Table 38 - RequestDomainUpload service . 104
Table 39 - LoadDomainContent service . 106
Table 40 - Store
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.