ISO 22651:2002

INTERNATIONAL ISO
STANDARD 22651
First edition
2002-09-15
Footwear — Test methods for insoles —
Dimensional stability
Chaussures — Méthodes d'essai relatives aux premières de montage —
Stabilité dimensionnelle
Reference number
©
ISO 2002
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 2002 – All rights reserved

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted
by the technical committees are circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 22651 was prepared by CEN (as EN 12800:2000) and was adopted, under a special “fast-track procedure”, by
Technical Committee ISO/TC 216, Footwear, in parallel with its approval by the ISO member bodies.
For the purposes of international standardization, a list of corresponding International and European Standards for
which equivalents are not given in EN 12800 has been added as annex ZZ.

Page 2
EN 12800:2000
Contents
Page
Foreword 3
..................................................................................................................................................

1 Scope 4
....................................................................................................................................................
2 Normative references 4
............................................................................................................................
3 Definitions 4
..............................................................................................................................................
4 Apparatus and material 4
.........................................................................................................................
5 Sampling and conditioning 5
....................................................................................................................
6 Test method 5
...........................................................................................................................................
7 Expression of results 6
.............................................................................................................................
8 Test report 7
.............................................................................................................................................
iv © ISO 2002 – All rights reserved

Page 3
EN 12800:2000
Foreword
This European Standard has been prepared by Technical Committee CEN/TC 309 "Footwear", the
secretariat of which is held by AENOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2000, and conflicting national standards shall
be withdrawn at the latest by August 2000.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
Page 4
EN 12800:2000
1 Scope
This European standard specifies a method for the determination of the dimensional stability of insoles,
irrespective of the material, after immersion in water.

2 Normative references
This European Standard incorporates by dated or undated reference, provisions from other publications.
These normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to, or revisions of, any of these publications
apply to this European Standard only when incorporated into it by amendment or revision. For undated
references the latest edition of th
...