Urine-absorbing aids for incontinence — Test methods for characterizing polymer-based absorbent materials — Part 6: Gravimetric determination of fluid retention capacity in saline solution after centrifugation

This part of ISO 17190 specifies a method for determining the fluid retention capacity of polyacrylate (PA) superabsorbent powders in saline solution, following centrifugation.

Aides pour absorption d'urine — Méthodes d'essai pour caractériser les matériaux absorbants à base de polymères — Partie 6: Détermination gravimétrique de la capacité de rétention de fluides en solution saline après centrifugation

La présente partie de la norme ISO 17190 spécifie une méthode de détermination du pouvoir de rétention de poudres superabsorbantes de polyacrylate (PA) en présence de solution saline après centrifugation.

General Information

Status
Withdrawn
Publication Date
05-Dec-2001
Withdrawal Date
05-Dec-2001
Current Stage
9599 - Withdrawal of International Standard
Completion Date
27-Oct-2020
Ref Project

Relations

Buy Standard

Standard
ISO 17190-6:2001 - Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials
English language
8 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 17190-6:2001 - Aides pour absorption d'urine -- Méthodes d'essai pour caractériser les matériaux absorbants a base de polymeres
French language
8 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 17190-6
First edition
2001-12-01

Urine-absorbing aids for incontinence —
Test methods for characterizing
polymer-based absorbent materials —
Part 6:
Gravimetric determination of fluid retention
capacity in saline solution after
centrifugation
Aides pour absorption d'urine — Méthodes d'essai pour caractériser les
matériaux absorbants à base de polymères —
Partie 6: Détermination gravimétrique de la capacité de rétention de fluides
en solution saline après centrifugation




Reference number
ISO 17190-6:2001(E)
©
ISO 2001

---------------------- Page: 1 ----------------------
ISO 17190-6:2001(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2001
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland

ii © ISO 2001 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 17190-6:2001(E)
Contents Page
Foreword.iv
Introduction.v
1 Scope .1
2 Normative references.1
3 Terms and definitions .1
4 Principle.2
5 Reagents.2
6 Apparatus .2
7 Sampling.3
8 Procedure .3
9 Calculation .4
10 Precision.5
11 Test report .5
Annex A (informative) Centrifugal acceleration.6
Annex B (informative) Statistical results of interlaboratory tests.7
Bibliography.8

© ISO 2001 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 17190-6:2001(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 17190 may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 17190-6 was prepared by Technical Committee ISO/TC 173, Technical systems and
aids for disabled or handicapped persons, Subcommittee SC 3, Aids for ostomy and incontinence.
ISO 17190 consists of the following parts, under the general title Urine-absorbing aids for incontinence — Test
methods for characterizing polymer-based absorbent materials:
 Part 1: Determination of pH
 Part 2: Determination of amount of residual monomers
 Part 3: Determination of particle size distribution by sieve fractionation
 Part 4: Determination of moisture content by mass loss upon heating
 Part 5: Gravimetric determination of free swell capacity in saline solution
 Part 6: Gravimetric determination of fluid retention capacity in saline solution after centrifugation
 Part 7: Gravimetric determination of absorption under pressure
 Part 8: Gravimetric determination of flowrate
 Part 9: Gravimetric determination of density
 Part 10: Determination of extractable polymer content by potentiometric titration
 Part 11: Determination of content of respirable particles
ISO 17190 is intended to be used in conjunction with ISO 17191, Urine-absorbing aids for incontinence — Airborne
polyacrylate superabsorbent material in the workplace — Determination of the content in respirable dust by sodium
atomic absorption spectrometry.
Annexes A and B of this part of ISO 17190 are given for information only.
iv © ISO 2001 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 17190-6:2001(E)
Introduction
ISO 17190 consists of a series of test methods originally developed by European Disposables and Nonwovens
Association (EDANA). These test methods have been incorporated without technical changes into one International
Standard consisting of eleven parts.
These test methods have been in practical use for several years, and have proven to be reliable with respect to
common criteria of quality of test methods (validity, repeatability, etc.). They are applicable to polyacrylate
superabsorbent materials, which occur in hygiene products, including urine-absorbing aids for incontinent persons.
The test methods are addressed to the material exclusively. They are not intended to be used, and are not
applicable for use with finished manufactured urine-absorbing aids.
© ISO 2001 – All rights reserved v

---------------------- Page: 5 ----------------------
INTERNATIONAL STANDARD ISO 17190-6:2001(E)

Urine-absorbing aids for incontinence — Test methods
for characterizing polymer-based absorbent materials —
Part 6:
Gravimetric determination of fluid retention capacity in saline
solution after centrifugation
1 Scope
This part of ISO 17190 specifies a method for determining the fluid retention capacity of polyacrylate (PA)
superabsorbent powders in saline solution, following centrifugation.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of
this part of ISO 17190. For dated references, subsequent amendments to, or revisions of, any of these publications
do not apply. However, parties to agreements based on this part of ISO 17190 are encouraged to investigate the
possibility of applying the most recent editions of the normative documents indicated below. For undated
references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain
registers of currently valid International Standards.
ISO 187, Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for
monitoring the atmosphere and conditioning of samples
ISO 3696, Water for analytical laboratory use — Specification and test methods
ISO 5725-2, Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for
the determination of repeatability and reproducibility of a standard measurement method
3 Terms and definitions
For the purposes of this part of ISO 17190, the following terms and definitions apply.
3.1
nonwoven
manufactured sheet, web or batt of directionally or randomly orientated fibres, bonded by friction, and/or cohesion
and/or adhesion, excluding paper and products which are woven, knitted, tufted, stitch-bonded incorporating
binding yarns or filaments, or felted by wet-milling, whether or not additionally needled
NOTE 1 The fibres may be
...

NORME ISO
INTERNATIONALE 17190-6
Première édition
2001-12-01


Aides pour absorption d'urine — Méthodes
d'essai pour caractériser les matériaux
absorbants à base de polymères —
Partie 6:
Détermination gravimétrique de la capacité
de rétention de fluides en solution saline
après centrifugation
Urine-absorbing aids for incontinence — Test methods for characterizing
polymer-based absorbent materials —
Part 6: Gravimetric determination of fluid retention capacity in saline
solution after centrifugation




Numéro de référence
ISO 17190-6:2001(F)
©
ISO 2001

---------------------- Page: 1 ----------------------
ISO 17190-6:2001(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier peut
être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence autorisant
l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées acceptent de fait la
responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute responsabilité en la
matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info du
fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir l'exploitation de
ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation, veuillez en informer le
Secrétariat central à l'adresse donnée ci-dessous.


©  ISO 2001
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque
forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l’ISO à
l’adresse ci-après ou du comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Imprimé en Suisse

ii © ISO 2001 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 17190-6:2001(F)
Sommaire Page
Avant-propos .iv
Introduction.v
1 Domaine d'application.1
2 Références normatives.1
3 Termes et définitions.1
4 Principe.2
5 Réactifs.2
6 Appareillage.2
7 Échantillonnage.3
8 Mode opératoire.3
9 Calcul.4
10 Fidélité.5
11 Rapport d'essai.5
Annexe A (informative) Accélération centrifuge.6
Annexe B (informative) Résultats statistiques d’essais interlaboratoires.7
Bibliographie.8

© ISO 2001 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 17190-6:2001(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée aux
comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du comité
technique créé à cet effet. Les organisations internationales, gouvernementales et non gouvernementales, en
liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec la Commission
électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 3.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur publication
comme Normes internationales requiert l'approbation de 75 % au moins des comités membres votants.
L'attention est appelée sur le fait que certains des éléments de la présente partie de l'ISO 17190 peuvent faire
l'objet de droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de
ne pas avoir identifié de tels droits de propriété et averti de leur existence.
La Norme internationale ISO 17190-6 a été élaborée par le comité technique ISO/TC 173, Assistances et aides
techniques pour les invalides ou handicapés, sous-comité SC 3, Aides pour ostomie et incontinence.
L'ISO 17190 comprend les parties suivantes, présentées sous le titre général Aides pour absorption d'urine —
Méthodes d'essai pour caractériser les matériaux absorbants à base de polymères:
 Partie 1: Détermination du pH
 Partie 2: Détermination de la quantité de monomères résiduels
 Partie 3: Détermination de la distribution granulométrique des particules au moyen du fractionnement par
tamisage
 Partie 4: Détermination de la teneur en humidité au moyen de la perte de masse par chauffage
 Partie 5: Détermination gravimétrique de la capacité de gonflement en solution saline
 Partie 6: Détermination gravimétrique de la capacité de rétention de fluides en solution saline après
centrifugation
 Partie 7: Détermination gravimétrique du pouvoir d’absorption sous pression
 Partie 8: Détermination gravimétrique du débit
 Partie 9: Détermination gravimétrique de la masse volumique
 Partie 10: Détermination de la teneur en polymère extractible par titrage potentiométrique
 Partie 11: Détermination de la teneur en particules respirables
L’ISO 17190 est destinée à être utilisée conjointement avec l’ISO 17191, Aides pour absorption d’urine —
Matériaux superabsorbants de polyacrylate en suspension dans l’air sur le lieu de travail — Dosage du contenu en
poussière respirable par spectrométrie à absorption atomique du sodium.
Les annexes A et B de la présente partie de l’ISO 17190 sont données uniquement à titre d’information.
iv © ISO 2001 – Tous droits réservés

---------------------- Page: 4 ----------------------
ISO 17190-6:2001(F)
Introduction
L’ISO 17190 consiste en une série de méthodes d'essai développées à l'origine par l’EDANA (European
Disposables and Nonwovens Association — Association européenne des disposables et des non tissés). Ces
méthodes d'essai ont été incorporées dans une Norme internationale en onze parties sans modifications
techniques.
Ces méthodes d'essai ont été appliquées pendant plusieurs années, et ont démontré leur fiabilité quant aux
critères de qualité habituels pour les méthodes d'essai (validité, répétabilité, etc.). Elles sont applicables aux
matériaux polyacrylates superabsorbants présents dans les produits hygiéniques, y compris les moyens
d'absorption d'urine pour personnes incontinentes. Les méthodes d'essai portent exclusivement sur les matériaux.
Elles ne sont pas destinées à être employées sur les moyens d'absorption d'urine finis et manufacturés et ne sont
pas applicables à ces derniers.

© ISO 2001 – Tous droits réservés v

---------------------- Page: 5 ----------------------
NORME INTERNATIONALE ISO 17190-6:2001(F)

Aides pour absorption d'urine — Méthodes d'essai pour
caractériser les matériaux absorbants à base de polymères —
Partie 6:
Détermination gravimétrique de la capacité de rétention de fluides
en solution saline après centrifugation
1 Domaine d'application
La présente partie de la norme ISO 17190 spécifie une méthode de détermination du pouvoir de rétention de
poudres superabsorbantes de polyacrylate (PA) en présence de solution saline après centrifugation.
2 Références normatives
Les documents normatifs suivants contiennent des dispositions qui, par suite de la référence qui y est faite,
constituent des dispositions valables pour la présente partie de l'ISO 17190. Pour les références datées, les
amendements ultérieurs ou les révisions de ces publications ne s'appliquent pas. Toutefois, les parties prenantes
aux accords fondés sur la présente partie de l'ISO 17190 sont invitées à rechercher la possibilité d'appliquer les
éditions les plus récentes des documents normatifs indiqués ci-après. Pour les références non datées, la dernière
édition du document normatif en référence s'applique. Les membres de l'ISO et de la CEI possèdent le registre des
Normes internationales en vigueur.
ISO 187, Papier, carton et pâtes — Atmosphère normale de conditionnement et d'essai et méthode de surveillance
de l'atmosphère et de conditionnement des échantillons
ISO 3696, Eau pour laboratoire à usage analytique — Spécification et méthodes d'essai
ISO 5725-2, Exactitude (justesse et fidélité) des résultats et méthodes de mesure — Partie 2: Méthode de base
pour la détermination de la répétabilité et de la reproductibilité d'une méthode de mesure normalisée
3 Termes et définitions
Pour les besoins de la présente partie de l'ISO 17190, les termes et définitions suivants s'appliquent.
3.1
Nontissé
Feuille manufacturée, constituée de voile ou de nappe de fibres orientées directionnellement ou au hasard, liées
par friction et/ou cohésion et/ou adhésion, à l’exclusion du papier et des produits obtenus par tissages, tricotages,
tuftages, couturages incorporant des fils ou filaments de liage ou feutrés par foulage humide, qu’ils soient ou non
auguilletés
NOTE 1 Les fibres peuvent être
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.