ISO 6141:2015/Amd 1:2020
(Amendment)Gas analysis - Contents of certificates for calibration gas mixtures - Amendment 1: Cross reference list to ISO Guide 31:2015 and ISO/IEC 17025:2017
Gas analysis - Contents of certificates for calibration gas mixtures - Amendment 1: Cross reference list to ISO Guide 31:2015 and ISO/IEC 17025:2017
Analyse des gaz — Contenu des certificats des mélanges de gaz pour étalonnage — Amendement 1: Liste des références croisées avec le Guide 31:2015 de l'ISO et l'ISO/IEC 17025:2017
General Information
- Status
- Published
- Publication Date
- 02-Feb-2020
- Technical Committee
- ISO/TC 158 - Analysis of gases
- Drafting Committee
- ISO/TC 158/WG 4 - Comparison methods and certificates
- Current Stage
- 6060 - International Standard published
- Start Date
- 03-Feb-2020
- Due Date
- 24-Nov-2019
- Completion Date
- 03-Feb-2020
Relations
- Consolidates
ISO 19824:2017 - Traditional Chinese medicine - Schisandra chinensis (Turcz.) Baill. seeds and seedlings - Effective Date
- 06-Jun-2022
- Effective Date
- 27-Nov-2021
Overview
ISO 6141:2015/Amd 1:2020 is an important amendment to the international standard ISO 6141:2015, which specifies the contents of certificates for calibration gas mixtures used in gas analysis. This amendment introduces a comprehensive cross-reference list aligning the requirements of ISO 6141 with those of ISO Guide 31:2015 and ISO/IEC 17025:2017. These references enhance clarity and consistency in documenting information for calibration gas mixtures, facilitating improved conformity and traceability in laboratory practices.
Key Topics
This amendment focuses on harmonizing the certificate content requirements through:
Cross-reference Table: A detailed table (Table A.1) mapping elements from ISO 6141 to corresponding clauses in ISO Guide 31:2015 (contents of certificates for reference materials) and ISO/IEC 17025:2017 (general requirements for testing and calibration laboratories). This includes:
- Unique identification of reference material and certificate numbers
- Names and addresses of certifying bodies
- Description, intended use, and certified values of calibration gas mixtures
- Uncertainty and metrological traceability of certified values
- Dates (certification, preparation, analysis) and validity periods
- Methods of preparation and analysis
- Signatures of certifying officers
- Customer identification and number of document pages
Alignment to Laboratory Competence: Ensuring that certificates for calibration gases meet requirements for laboratory competence and quality control as stipulated by ISO/IEC 17025.
Reference to ISO 17034:2016: The note highlights that ISO 17034 sets similar requirements for reference material certificates, emphasizing uniformity for producers of calibration gases and related reference materials.
Applications
ISO 6141:2015/Amd 1:2020 is highly relevant to:
- Calibration Gas Producers: Assists producers in creating compliant certificates, ensuring traceability and reliability of calibration gas mixtures for industrial and environmental gas analysis.
- Testing and Calibration Laboratories: Supports laboratory accreditation processes by aligning certification documentation with internationally recognized competence requirements (ISO/IEC 17025).
- Quality Assurance Teams: Facilitates implementation of consistent documentation practices for calibration gases, improving audit readiness and regulatory compliance.
- Gas Analysis Equipment Manufacturers: Provides clear standards for traceable calibration gas certificates, crucial for validating sensor and analyzer accuracy.
- Regulatory Bodies and Certification Authorities: Offers a standardized framework to evaluate calibration gas documentation for conformity assessment.
Related Standards
For a comprehensive understanding and effective application, this amendment should be used alongside the following key standards:
- ISO Guide 31:2015 - Reference materials: Contents of certificates, labels, and accompanying documentation. This guide details best practices for documenting reference materials which underpin calibration procedures.
- ISO/IEC 17025:2017 - General requirements for the competence of testing and calibration laboratories. This standard specifies quality and technical requirements that laboratories must meet.
- ISO 17034:2016 - General requirements for the competence of reference material producers, ensuring that reference materials (including calibration gases) meet stringent quality standards.
By integrating the requirements of these standards, ISO 6141:2015/Amd 1:2020 provides a robust framework ensuring accuracy, traceability, and clarity in calibration gas certification, essential for effective and reliable gas analysis across various industries.
Keywords: ISO 6141 amendment, calibration gas mixtures, gas analysis certification, ISO Guide 31, ISO/IEC 17025, calibration gas certificates, reference materials, laboratory accreditation, metrological traceability, quality assurance gas analysis
ISO 6141:2015/Amd 1:2020 - Gas analysis — Contents of certificates for calibration gas mixtures — Amendment 1: Cross reference list to ISO Guide 31:2015 and ISO/IEC 17025:2017 Released:2/3/2020
ISO 6141:2015/Amd 1:2020 - Analyse des gaz — Contenu des certificats des mélanges de gaz pour étalonnage — Amendement 1: Liste des références croisées avec le Guide 31:2015 de l'ISO et l'ISO/IEC 17025:2017 Released:2/3/2020
Frequently Asked Questions
ISO 6141:2015/Amd 1:2020 is a standard published by the International Organization for Standardization (ISO). Its full title is "Gas analysis - Contents of certificates for calibration gas mixtures - Amendment 1: Cross reference list to ISO Guide 31:2015 and ISO/IEC 17025:2017". This standard covers: Gas analysis - Contents of certificates for calibration gas mixtures - Amendment 1: Cross reference list to ISO Guide 31:2015 and ISO/IEC 17025:2017
Gas analysis - Contents of certificates for calibration gas mixtures - Amendment 1: Cross reference list to ISO Guide 31:2015 and ISO/IEC 17025:2017
ISO 6141:2015/Amd 1:2020 is classified under the following ICS (International Classification for Standards) categories: 71.040.40 - Chemical analysis. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 6141:2015/Amd 1:2020 has the following relationships with other standards: It is inter standard links to ISO 19824:2017, ISO 6141:2015. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 6141:2015/Amd 1:2020 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 6141
Fourth edition
2015-03-01
AMENDMENT 1
2020-02
Gas analysis — Contents of certificates
for calibration gas mixtures
AMENDMENT 1: Cross reference list
to ISO Guide 31:2015 and ISO/IEC
17025:2017
Analyse des gaz — Contenu des certificats des mélanges de gaz pour
étalonnage
AMENDEMENT 1: Liste des références croisées avec le Guide 31:2015
de l'ISO et l'ISO/IEC 17025:2017
Reference number
ISO 6141:2015/Amd.1:2020(E)
©
ISO 2020
ISO 6141:2015/Amd.1:2020(E)
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
ISO 6141:2015/Amd.1:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity a
...
NORME ISO
INTERNATIONALE 6141
Quatrième édition
2015-03-01
AMENDEMENT 1
2020-02
Analyse des gaz — Contenu des
certificats des mélanges de gaz pour
étalonnage
AMENDEMENT 1: Liste des références
croisées avec le Guide 31:2015 de l'ISO et
l'ISO/IEC 17025:2017
Gas analysis — Contents of certificates for calibration gas mixtures
AMENDMENT 1: Cross reference list to ISO Guide 31:2015 and ISO/
IEC 17025:2017
Numéro de référence
ISO 6141:2015/Amd.1:2020(F)
©
ISO 2020
ISO 6141:2015/Amd.1:2020(F)
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2020
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
Fax: +41 22 749 09 47
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii © ISO 2020 – Tous droits réservés
ISO 6141:2015/Amd.1:2020(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes
nationaux de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est
en général confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l'ISO participent également aux travaux.
L'ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d'approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir www
.iso .org/ directives).
L'attention est attirée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant
les références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de
l'élaboration du document sont indiqués dans l'Introduction et/ou dans la liste des déclarations de
brevets reçues par l'ISO (voir www .iso .org/ brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un
engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l'ISO liés à l'évaluation de la conformité, ou pour toute information au sujet de l'adhésion
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...