iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 6753:1982

(Main)

Machined plates for press tools, moulds, jigs and fixtures — Nominal dimensions

Machined plates for press tools, moulds, jigs and fixtures — Nominal dimensions

Plaques usinées pour outils de presses, moules, montages et fixations — Dimensions nominales

General Information

Status
Withdrawn
Publication Date
31-Oct-1982
Withdrawal Date
31-Oct-1982
ICS
25.120.10 - Forging equipment. Presses. Shears
25.120.30 - Moulding equipment
Technical Committee
ISO/TC 29/SC 8 - Tools for pressing and moulding
Drafting Committee
ISO/TC 29/SC 8 - Tools for pressing and moulding
Current Stage
9599 - Withdrawal of International Standard
Completion Date
14-May-1998
Ref Project

Relations

Revised
ISO 6753-2:1998 - Tools for pressing and moulding — Machined plates — Part 2: Machined plates for moulds
Effective Date
15-Apr-2008

Buy Standard

ISO 6753:1982 - Machined plates for press tools, moulds, jigs and fixtures -- Nominal dimensionsISO 6753:1982 - Machined plates for press tools, moulds, jigs and fixtures -- Nominal dimensions
PreviousNext
Standard
ISO 6753:1982 - Machined plates for press tools, moulds, jigs and fixtures -- Nominal dimensions
English language
1 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 6753:1982 - Plaques usinées pour outils de presses, moules, montages et fixations -- Dimensions nominalesISO 6753:1982 - Plaques usinées pour outils de presses, moules, montages et fixations -- Dimensions nominales
PreviousNext
Standard
ISO 6753:1982 - Plaques usinées pour outils de presses, moules, montages et fixations -- Dimensions nominales
French language
1 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

International Standard 6753
INTERNATIONAL ORGANIZATION FOR STANOARDIZATION~ME~YHAPOflHAA OPrAHH3AUMR il0 CTAHLIAP7H3AL(MM.oRGANISATION INTERNATIONALE DE NORMALISATION
il) Machined plates for press tools, moulds, jigs and
- Nominal dimensions
fixtures
Plaques usinées pour outils de presses, moules, montages et fixations - Dimensions nominales
First edition - 1982-11-01
O
UDC 621.979.073 Ref. No. IS0 6753-1982 (E)
-
Descriptors : tools, plates, dimensions.
8 7
9
6
Price based on 1 page
s

---------------------- Page: 1 ----------------------
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards institutes (IS0 member bodies). The work of deveioping Interna-
tional Standards is carried out through IS0 technical committees. Every member body
interested in a subject for which a technical committee has been set up has the right to
be represented on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council.
International Standard IS0 6753 was developed by Technical Committee ISO/TC 29,
Small tools, and was circulated to the member
...

Norme internationale 6753
INTERNATIONAL ORGANIZATION FOR STANDARDIZATlON*ME)KAYHAPOaHAR OPTAHHJAUMR il0 CTAHAAPTH3AUMH.ORGANlSATlON INTERNATIONALE DE NORMALISATION
Plaques usinées pour outils de presses, moules, montages
O
et fixations - Dimensions nominales
Machined plates for press tools, moulds, jigs and fixtures - Nominal dimensions
Première édition - 1982-11-01
Réf. no : IS0 6753-1982 (FI
- CDU 621.979.073
5
Descripteurs : outil, plaque, dimension.
.)
Q
IB
Prix basé sur 1 Page
O-

---------------------- Page: 1 ----------------------
Avant-propos
L‘ISO (Organisation internationale de normalisation) est une fédération mondiale
d‘organismes nationaux de normalisation (comités membres de I‘ISO). L‘élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO.
I
La Norme internationale IS0 6753 a été élaborée par le comité technique ISO/TC 29,
Petit outillage, et a été soumise
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 20200:2023(Main)
Plastics — Determination of the degree of disintegration of plastic materials under composting conditions in a laboratory-scale test

This document specifies a method of determining the degree of disintegration of plastic materials when exposed to a laboratory-scale composting environment. The method is not applicable to the determination of the biodegradability of plastic materials under composting conditions. Further testing is necessary to be able to claim compostability.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
ISO
ISO 9241-221:2023(Main)
Ergonomics of human-system interaction — Part 221: Human-centred design process assessment model

This document specifies the process references model (PRM) for human-centred design (HCD) according to ISO 9241-220, as well as the process assessment model (PAM) for assessing these processes, based on ISO/IEC 33020 and in accordance with the requirements of ISO/IEC 33004. This HCD PAM contains a set of indicators to be considered while interpreting the intent of the HCD PRM defined in ISO 9241-220. These indicators can also be applied when implementing a process improvement programme post an assessment. NOTE 1 The PRM in this document focuses on assessing HCD processes rather than system life cycle, for example as in ISO/IEC/IEEE 15288, or software life cycle, as in ISO/IEC/IEEE 12207. NOTE 2 If processes beyond the scope of ISO 9241-220 are required, appropriate processes from other PRMs, such as ISO/IEC/IEEE 12207, ISO/IEC/IEEE 15288 or ISO/TS 18152, can be added based on the business needs of the organization. The intended application of this document is computer-based interactive systems. While the processes apply to interactive systems that deliver services, they do not cover the design of those services. The relevant aspects of the processes can also be applied to simple or non-computer-based interactive systems. NOTE 3 HCD concentrates on the human-centred aspects of design and not on other aspects of design, such as mechanical construction, programming or the basic design of services. The process descriptions in this document provide the basis for a rigorous assessment of an enterprise’s capability to carry out human-centred processes in conformity with the ISO/IEC 33004 and ISO/IEC 33020. This document is intended for use by organizations that want to address and improve their treatment of human-centred design of either their internal systems or the products and services they provide, and the procurement of systems and parts of systems. The processes can be applied by small- and medium-sized enterprises as well as by large organizations. NOTE 4 The scope of application of the PAM is the same as that of the PRM, which is described in ISO 9241-220:2019, Clause 1.

  • Standard
    102 pages
    English language
    sale 15% off
ISO
ISO 19642-1:2023(Main)
Road vehicles — Automotive cables — Part 1: Vocabulary and design guidelines

This document defines terms in the field of cables applied in road vehicle general purpose applications, for use in the other parts of the ISO 19642 series.

  • Standard
    27 pages
    English language
    sale 15% off
ISO
ISO/IEC 9797-1:2011/Amd 1:2023(Amendment)
Information technology — Security techniques — Message Authentication Codes (MACs) — Part 1: Mechanisms using a block cipher — Amendment 1
  • Standard
    1 page
    English language
    sale 15% off
ISO
ISO 23316-7:2023(Main)
Tractors and machinery for agriculture and forestry — Electrical high-power interface 700 V DC / 480 V AC — Part 7: Mechanical integration

This document instructs the manufacturers of tractors and implements how to integrate mechanically and use the HPI. NOTE The terms "tractor" and "implement” are used instead of “supply system” and “consumer system” for better understanding in this part.

  • Standard
    5 pages
    English language
    sale 15% off
ISO
ISO/TS 24665:2023(Main)
Playground and recreational areas — Framework for the competence of playground inspectors and playground maintenance technicians

This document gives guidance and requirements for the education, examination and evaluation of the inspectors’ and maintenance technicians’ competence concerning public playground and recreational areas. This document describes the knowledge and competence required for each specific task an inspector or technician performs. This document is intended primarily for public playgrounds, but the principles are applicable to other recreational areas. This document does not include benefit/risk assessment methods. This document does not cover the competence of staff conducting product certification. NOTE 1 The different types of inspections covered are: routine visual inspection; operational inspection; annual main inspection; post-installation inspection; post-accident inspection; pre-installation consultation; mid-installation surveillance. NOTE 2 This document can be applicable to: roller-sport infrastructure; multi-sport arenas; outdoor exercise equipment; bouldering walls; portable and permanent socketed goals; parkour facilities; adventure playgrounds; ropes courses; inflatable play equipment.

  • Technical specification
    23 pages
    English language
    sale 15% off
  • Draft
    22 pages
    English language
    sale 15% off
  • Draft
    22 pages
    English language
    sale 15% off
ISO
ISO 22574:2023(Main)
Road vehicles — Brake linings friction materials — Visual inspection

This document defines visual aspects for the identification and assessment of product characteristics for friction materials in terms of quality and for commercial and technical agreements. The sequence of the product characteristics represents no order of priority. Inspection is carried out in unused, “as supplied” condition. In some characteristic features, there are differences between brake linings with an effective lining pad area less than 120 cm2 and larger than 120 cm2. The acceptance criteria ensure exclusion of any characteristics that could impact the function and performance of brake linings and applies unless other agreements between the customer and the supplier.

  • Standard
    35 pages
    English language
    sale 15% off
ISO
ISO 7055:2023(Main)
Natural gas — Upstream area — Determination of drag reduction in laboratory for slick water

This document specifies a method for the determination of drag reduction of slick water, which is mainly used to evaluate the drag reduction performance of slick water. This document uses the pipeline method to evaluate the drag reduction, which is currently recognized as the best method to evaluate the drag reduction performance. This document describes the device, experimental conditions and operating steps in detail. The drag reduction value obtained by evaluation according to this document can effectively represent the on-site drag reduction performance.

  • Standard
    5 pages
    English language
    sale 15% off
ISO
ISO/TS 7127:2023(Main)
Light and lighting — Building information modelling properties for lighting — Lighting systems

This technical specification identifies and clarifies lighting properties for digital building design and maintenance. This document provides all the needed properties to design and to describe lighting systems. These properties are intended to be used for mapping between data providers and requesters. The mapping of the identifiers enables the exchange of luminaire and sensing device data within different databases. The unambiguous mapping and description of properties improves the data quality, reduces misinterpretations and the processing time in digital environments. Therefore, the properties listed in this document establish the essential description of lighting systems in BIM systems and databases. The listed properties in this document are used to structure the product data sheet which is complemented with real product information.

  • Technical specification
    61 pages
    English language
    sale 15% off
  • Draft
    61 pages
    English language
    sale 15% off
  • Draft
    61 pages
    English language
    sale 15% off
ISO
ISO 10300-3:2023(Main)
Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength

This document specifies the fundamental formulae for use in the tooth root stress calculation of straight and helical (skew), Zerol and spiral bevel gears including hypoid gears, with a minimum rim thickness under the root of 3,5 mmn. All load influences on tooth root stress are included, insofar as they are the result of load transmitted by the gearing and able to be evaluated quantitatively. Stresses, such as those caused by the shrink fitting of gear rims, which are superposed on stresses due to tooth loading, are intended to be considered in the calculation of the tooth root stress, σF, or the permissible tooth root stress σFP. This document is not applicable in the assessment of tooth flank fracture. The formulae in this document are based on virtual cylindrical gears and restricted to bevel gears whose virtual cylindrical gears have transverse contact ratios of εvα This document does not apply to stress levels above those permitted for 103 cycles, as stresses in that range can exceed the elastic limit of the gear tooth. NOTE This document is not applicable to bevel gears which have an inadequate contact pattern under load. The user is cautioned that when the formulae are used for large average mean spiral angles (βm1 + βm2)/2 > 45°, for effective pressure angles αe > 30° and/or for large facewidths b > 13 mmn, the calculated results of this document should be confirmed by experience.

  • Standard
    43 pages
    English language
    sale 15% off