iTeh Standards logo
EURUSD
Your shopping cart is empty.
ISO

ISO 6336-2:1996/Cor 2:1999

(Corrigendum)

Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pitting) - Technical Corrigendum 2

Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pitting) - Technical Corrigendum 2

Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale — Partie 2: Calcul de la résistance à la pression de contact (piqûres) — Rectificatif technique 2

Izračun nosilnosti ravnozobih in poševnozobih zobnikov - 2. del: Izračun obratovalne vzdržljivosti zobnih bokov (jamičenje) - Tehnični popravek 2

General Information

Status
Withdrawn
Publication Date
01-Sep-1999
Withdrawal Date
01-Sep-1999
ICS
21.200 - Gears
Technical Committee
ISO/TC 60/SC 2 - Gear capacity calculation
Drafting Committee
ISO/TC 60/SC 2/WG 6 - Gear calculations
Current Stage
9599 - Withdrawal of International Standard
Start Date
04-Sep-2006
Completion Date
13-Dec-2025
Ref Project
SIST ISO 6336-2:2002/TC 2:2002 - Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pitting) - TECHNICAL CORRIGENDUM 2

Relations

Corrects
ISO 6336-2:1996 - Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pitting)
Effective Date
06-Jun-2022
Revised
ISO 6336-2:2006 - Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pitting)
Effective Date
15-Apr-2008
Child
ISO 6336-2:1996 - Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pitting)
Effective Date
15-Apr-2008
ISO 6336-2:1996/Cor 2:1999ISO 6336-2:1996/Cor 2:1999
PreviousNext
Standard
ISO 6336-2:1996/Cor 2:1999
English language
1 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 6336-2:2002/TC 2:2002ISO 6336-2:2002/TC 2:2002
PreviousNext
Corrigendum
ISO 6336-2:2002/TC 2:2002
English language
1 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Frequently Asked Questions

ISO 6336-2:1996/Cor 2:1999 is a standard published by the International Organization for Standardization (ISO). Its full title is "Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pitting) - Technical Corrigendum 2". This standard covers: Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pitting) - Technical Corrigendum 2

Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pitting) - Technical Corrigendum 2

ISO 6336-2:1996/Cor 2:1999 is classified under the following ICS (International Classification for Standards) categories: 21.200 - Gears. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO 6336-2:1996/Cor 2:1999 has the following relationships with other standards: It is inter standard links to ISO 6336-2:1996, ISO 6336-2:2006; is excused to ISO 6336-2:1996. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

You can purchase ISO 6336-2:1996/Cor 2:1999 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.

Standards Content (Sample)


INTERNATIONAL STANDARD ISO 6336-2:1996
TECHNICAL CORRIGENDUM 2
Published 1999-08-01
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION � МЕЖДУНАРОДНАЯОРГАНИЗАЦИЯПОСТАНДАРТИЗАЦИИ � ORGANISATION INTERNATIONALE DE NORMALISATION
Calculation of load capacity of spur and helical gears —
Part 2:
Calculation of surface durability (pitting)
TECHNICAL CORRIGENDUM 2
Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale —
Partie 2: Calcul de la résistance à la pres
...


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.,]UDþXQCalculation of load capacity of spur and helical gears — Part 2: Calculation of surface durability (pitting) -
TECHNICAL CORRIGENDUM 221.200GonilaGearsICS:Ta slovenski standard je istoveten z:ISO 6336-2:1996/Cor 2:1999SIST ISO 6336-2:2002/TC 2:2002en01-julij-2002SIST ISO 6336-2:2002/TC 2:2002SLOVENSKI
STANDARD
ICS21.200Ref.No.ISO6336-2:1996/Cor.2:1999(E)©ISO1999–AllrightsreservedPrintedinSwitzerlandINTERNATIONALSTANDARDISO6336-2:1996TECHNICALCORRIGENDUM2Published1999-08-0
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

ISO
ISO 23509-1:2025(Main)
Bevel and hypoid gear geometry - Part 1: Basic methods

This document specifies the macro geometry of bevel gears. The term "bevel gears" is used to mean straight, skew, spiral, Zerol bevel and hypoid gear designs. If the text pertains to one or more, but not all, of these, the specific forms are identified. The manufacturing process of forming the desired tooth form is not intended to imply any specific process, but rather to be general in nature and applicable to all methods of manufacture. The geometry for the calculation of factors used in bevel gear rating, such as ISO 10300 (all parts), is also included. This document is intended for use by an experienced gear designer capable of selecting reasonable values for the factors based on his or her knowledge and background. It is not intended for use by the engineering public at large. Annex A provides a structure for the calculation of the methods provided in this document.

  • Standard
    80 pages
    English language
    sale 15% off
  • Standard
    84 pages
    French language
    sale 15% off
ISO
ISO/TR 10300-30:2024(Main)
Calculation of load capacity of bevel gears - Part 30: ISO rating system for bevel and hypoid gears - Sample calculations

This document provides sample calculations for the load capacity of different bevel gear designs, determined according to the methods and formulae of the ISO 10300 series. The initial geometric gear data necessary for these calculations are according to ISO 23509. The term “bevel gear” is used to mean straight, helical (skew), spiral bevel, zerol and hypoid gear designs. Where this document pertains to one or more, but not all, the specific forms are identified. The manufacturing process of forming the desired tooth form is not intended to imply any specific process, but rather to be general in nature and applicable to all calculation methods of the ISO 10300 series. The fact that there are bevel gear designs with tapered teeth and others where the tooth depth remains constant along the facewidth (uniform depth) does not require to apply Method B2 for the first and Method B1 for the second tooth configuration. The rating system of the ISO 10300 series is based on virtual cylindrical gears and restricted to bevel gears whose virtual cylindrical gears have transverse contact ratios of εvα ISO 23509). WARNING The user is cautioned that when the formulae are used for large average mean spiral angles, (βm1 + βm2)/2 > 45°, for effective pressure angles, αe > 30° and/or for large facewidths, b > 13 mmn, to confirm the calculated results of the ISO 10300 series by experience.

  • Technical report
    362 pages
    English language
    sale 15% off
ISO
ISO 10300-2:2023(Main)
Calculation of load capacity of bevel gears - Part 2: Calculation of surface durability (macropitting)

This document specifies the methods of calculation of the load capacity of bevel gears, the formulae and symbols used for calculation, and the general factors influencing load conditions. The formulae in this document are intended to establish uniformly acceptable methods for calculating the load-carrying capacity of straight, helical (skew), spiral bevel, Zerol and hypoid gears. They are applicable equally to tapered depth and uniform depth teeth. Hereinafter, the term “bevel gear” refers to all of the gear types; if not, the specific forms are identified. The formulae in this document take into account the known major factors influencing load-carrying capacity. The rating formulae are only applicable to types of gear tooth deterioration, that are specifically addressed in the individual parts of the ISO 10300 series. Rating systems for a particular type of bevel gears can be established by selecting proper values for the factors used in the general formulae. NOTE This document is not applicable to bevel gears which have an inadequate contact pattern under load (see Annex D). The rating system of this document is based on virtual cylindrical gears and restricted to bevel gears whose virtual cylindrical gears have transverse contact ratios of εvα The user is cautioned that when the formulae are used for large average mean spiral angles (βm1 + βm2)/2 > 45°, for effective pressure angles αe > 30° and/or for large facewidths b > 13 mmn, the calculated results of this document should be confirmed by experience.

  • Standard
    35 pages
    English language
    sale 15% off
ISO
ISO 10300-1:2023(Main)
Calculation of load capacity of bevel gears - Part 1: Introduction and general influence factors

This document specifies the methods of calculation of the load capacity of bevel gears, the formulae and symbols used for calculation, and the general factors influencing load conditions. The formulae in this document are intended to establish uniformly acceptable methods for calculating the load-carrying capacity of straight, helical (skew), spiral bevel, Zerol and hypoid gears. They are applicable equally to tapered depth and uniform depth teeth. Hereinafter, the term “bevel gear” refers to all of the gear types; if not, the specific forms are identified. The formulae in this document take into account the known major factors influencing load-carrying capacity. The rating formulae are only applicable to types of gear tooth deterioration, that are specifically addressed in the individual parts of the ISO 10300 series. Rating systems for a particular type of bevel gears can be established by selecting proper values for the factors used in the general formulae. NOTE This document is not applicable to bevel gears which have an inadequate contact pattern under load (see Annex D). The rating system of this document is based on virtual cylindrical gears and restricted to bevel gears whose virtual cylindrical gears have transverse contact ratios of εvα The user is cautioned that when the formulae are used for large average mean spiral angles (βm1 + βm2)/2 > 45°, for effective pressure angles αe > 30° and/or for large facewidths b > 13 mmn, the calculated results of this document should be confirmed by experience.

  • Standard
    54 pages
    English language
    sale 15% off
ISO
ISO 10300-3:2023(Main)
Calculation of load capacity of bevel gears - Part 3: Calculation of tooth root strength

This document specifies the fundamental formulae for use in the tooth root stress calculation of straight and helical (skew), Zerol and spiral bevel gears including hypoid gears, with a minimum rim thickness under the root of 3,5 mmn. All load influences on tooth root stress are included, insofar as they are the result of load transmitted by the gearing and able to be evaluated quantitatively. Stresses, such as those caused by the shrink fitting of gear rims, which are superposed on stresses due to tooth loading, are intended to be considered in the calculation of the tooth root stress, σF, or the permissible tooth root stress σFP. This document is not applicable in the assessment of tooth flank fracture. The formulae in this document are based on virtual cylindrical gears and restricted to bevel gears whose virtual cylindrical gears have transverse contact ratios of εvα This document does not apply to stress levels above those permitted for 103 cycles, as stresses in that range can exceed the elastic limit of the gear tooth. NOTE This document is not applicable to bevel gears which have an inadequate contact pattern under load. The user is cautioned that when the formulae are used for large average mean spiral angles (βm1 + βm2)/2 > 45°, for effective pressure angles αe > 30° and/or for large facewidths b > 13 mmn, the calculated results of this document should be confirmed by experience.

  • Standard
    43 pages
    English language
    sale 15% off
ISO
ISO 14635-2:2023(Main)
Gears - FZG test procedures - Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils

This document specifies a test method based on a FZG four-square test machine to determine the relative load-carrying capacity of high EP oils defined by the gear surface damage known as scuffing. This test method is useful for evaluating the scuffing load capacity potential of oils typically used with highly stressed cylindrical gearing found in many vehicle and stationary applications. It is not suitable for establishing the scuffing load capacity potential of oils used in highly loaded hypoid bevel gearing applications, for which purpose other methods are available in the industry. NOTE This method is technically equivalent to CEC L-84-02.

  • Standard
    19 pages
    English language
    sale 15% off
ISO
ISO 14635-1:2023(Main)
Gears - FZG test procedures - Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils

This document specifies a test method based on a FZG four-square test machine to determine the relative load-carrying capacity of lubricating oils defined by the gear-surface damage known as scuffing. High surface temperatures due to high surface pressures and sliding velocities can initiate the breakdown of the lubricant films. This test method can be used to assess such lubricant breakdown under defined conditions of temperature, high sliding velocity and stepwise increased load. NOTE This method is technically equivalent to ASTM D 5182-19 and CEC L-07-A-95.

  • Standard
    18 pages
    English language
    sale 15% off
ISO
ISO 14635-3:2023(Main)
Gears - FZG test procedures - Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases

This document specifies a test method based on a FZG four-square test machine for determining the relative load-carrying capacity of semi-fluid gear greases defined by the gear surface damage known as scuffing. This method is useful for evaluating the scuffing load capacity potential of semi-fluid gear greases of NLGI classes 0 to 000, typically used with highly stressed gearing for enclosed gear drives. It can only be applied to greases giving a sufficient lubricant flow in the test gear box of the FZG test machine. NOTE The test method is technically equivalent to DIN Fachbericht 74.

  • Standard
    20 pages
    English language
    sale 15% off
ISO
ISO/TR 6336-30:2022(Main)
Calculation of load capacity of spur and helical gears - Part 30: Calculation examples for the application of ISO 6336 parts 1,2,3,5

This document presents worked examples that apply exclusively the approximation methods for the determination of specific influential factors, such as the dynamic factor, Kv, and the load distributions factors KHα, KHβ, etc., where full analytical calculation procedures are provided within the referenced parts of ISO 6336. Worked examples covering the more advanced analysis techniques and methods are not applicable to this document. The example calculations presented in this document are provided for guidance on the application of ISO 6336-1:2019, ISO 6336-2:2019, ISO 6336-3:2019 and ISO 6336-5:2016. Any of the values, safety factors or the data presented do not represent recommended criteria for real gearing. Data presented within this document are for the purpose of aiding the application of the calculation procedures of ISO 6336-1, ISO 6336-2, ISO 6336-3 and ISO 6336-5.

  • Technical report
    63 pages
    English language
    sale 15% off
ISO
ISO/TS 6336-20:2022(Main)
Calculation of load capacity of spur and helical gears - Part 20: Calculation of scuffing load capacity - Flash temperature method

This document specifies methods and formulae for evaluating the risk of scuffing, based on Blok's contact temperature concept. The fundamental concept is applicable to all machine elements with moving contact zones. The flash temperature formulae are valid for a band-shaped or approximately band-shaped Hertzian contact zone and working conditions characterized by sufficiently high Péclet numbers.

  • Technical specification
    34 pages
    English language
    sale 15% off
  • Technical specification
    36 pages
    French language
    sale 15% off
  • Technical specification
    36 pages
    French language
    sale 15% off