iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 16935:2007

(Main)

Glass in building — Bullet-resistant security glazing — Test and classification

Glass in building — Bullet-resistant security glazing — Test and classification

ISO 16935:2006 sets forth test procedures to evaluate resistance of security glazing materials and products against ballistic impact with classification by weapon and ammunition. ISO 16935:2006 is applicable to attack by handguns, ammunition fired from machine pistols or submachine guns, rifles and shotguns, on products used for glazing in buildings, for both interior and exterior use. ISO 16935:2006 assumes the glazing is adequately fixed, but does not apply to the glazing system or the surrounding materials and structure.

Verre dans la construction — Vitrages de sécurité résistant aux balles — Essai et classification

General Information

Status
Published
Publication Date
23-Jan-2007
ICS
81.040.20 - Glass in building
Technical Committee
ISO/TC 160/SC 2 - Use considerations
Drafting Committee
ISO/TC 160/SC 2/WG 7 - Security glazing tests
Current Stage
9093 - International Standard confirmed
Completion Date
25-May-2023
Ref Project

Relations

Consolidated By
ISO 9539:2010/Amd 1:2013 - Gas welding equipment — Materials for equipment used in gas welding, cutting and allied processes — Amendment 1
Effective Date
06-Jun-2022

Buy Standard

ISO 16935:2007 - Glass in building -- Bullet-resistant security glazing -- Test and classificationISO 16935:2007 - Glass in building -- Bullet-resistant security glazing -- Test and classification
PreviousNext
Standard
ISO 16935:2007 - Glass in building -- Bullet-resistant security glazing -- Test and classification
English language
13 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 16935
First edition
2007-02-01

Glass in building — Bullet-resistant
security glazing — Test and classification
Verre dans la construction — Vitrages de sécurité résistant aux
balles — Essai et classification




Reference number
ISO 16935:2007(E)
©
ISO 2007

---------------------- Page: 1 ----------------------
ISO 16935:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2007 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 16935:2007(E)
Contents Page
Foreword. iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 1
4 Sample . 2
5 Apparatus . 2
6 Test method. 5
7 Performance requirements . 6
8 Classification. 7
9 Test report . 9
10 Marking . 9
Annex A (normative) Testing the bullet-resistance of glazing for the open class . 10
Annex B (normative) Testing the bullet-resistance of glazing at extreme temperatures . 11
Annex C (informative) Considerations for installation of bullet-resistant glazing . 12
Annex D (informative) Considerations for the bullet-resistance of other elements of a protective
structure . 13

© ISO 2007 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 16935:2007(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of e
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 16932:2020(Main)
Glass in building — Destructive-windstorm-resistant security glazing — Test and classification

1.1 This document determines resistance of security glazing products to natural threats characterized by simulated destructive-windstorm events. 1.2 The test method determines the performance of security-glazing for use in fenestration assemblies under conditions representative of events that occur in severe, destructive-windstorm environments using simulated missile impact(s) followed by the application of cyclic static-pressure differentials. 1.3 A missile-propulsion device, an air pressure system and a test chamber are used to model some conditions that can be representative of windborne debris and pressures in a windstorm environment. 1.4 The performance determined by this test method relates to the ability of glazing in the building envelope to remain without openings during a windstorm.

  • Standard
    18 pages
    English language
    sale 15% off
  • Standard
    19 pages
    French language
    sale 15% off
ISO
ISO 16936-1:2020(Main)
Glass in building — Forced-entry security glazing — Part 1: Test and classification by repetitive ball drop

This document specifies requirements and a test method for security glazing designed to resist impacts of a hard body by delaying access of objects and/or persons to a protected space for a short period of time. It also classifies security-glazing products into categories of resistance to repetitive impacts of a steel sphere. In this document, the categories of resistance have not been assigned to special applications. It is intended that the glazing classification be specified on an individual basis for every application and anticipated action of force upon the glazing. This document deals with mechanical resistance to impact only. NOTE Other properties can also be important.

  • Standard
    9 pages
    English language
    sale 15% off
ISO
ISO 1288-2:2016(Main)
Glass in building — Determination of the bending strength of glass — Part 2: Coaxial double-ring test on flat specimens with large test surface areas

ISO 1288-2:2016 specifies a method for determining the bending strength of glass for use in buildings, excluding the effects of the edges. The limitations of this part of ISO 1288 are described in ISO 1288‑1.

  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    14 pages
    English language
    sale 15% off
ISO
ISO 1288-1:2016(Main)
Glass in building — Determination of the bending strength of glass — Part 1: Fundamentals of testing glass

ISO 1288-1:2016 specifies the determination of the bending strength of monolithic glass for use in buildings. The testing of insulating units or laminated glass is excluded from this part of ISO 1288. ISO 1288-1:2016 describes - considerations to be taken into account when testing glass, - explanations of the reasons for designing different test methods, - limitations of the test methods, and - gives pointers to safety requirements for the personnel operating the test equipment. ISO 1288‑2, ISO 1288‑3, ISO 1288‑4 and ISO 1288‑5 specify test methods in detail. The test methods specified in this part of ISO 1288 are intended to provide large numbers of bending strength values that can be used as the basis for statistical evaluation of glass strength.

  • Standard
    18 pages
    English language
    sale 15% off
  • Standard
    18 pages
    English language
    sale 15% off
ISO
ISO 1288-5:2016(Main)
Glass in building — Determination of the bending strength of glass — Part 5: Coaxial double ring test on flat specimens with small test surface areas

ISO 1288-5:2016 specifies a method for determining the comparative bending strength of glass for use in buildings, excluding the effects of the edges. See ISO 1288‑1, 5.1.4 for an explanation as to why this test method should only be used for comparing the strength of types of glass and not for assessing strength for design purposes. The limitations of this part of ISO 1288 are described in ISO 1288‑1. ISO 1288‑1 should be read in conjunction with this part of ISO 1288. This test method is not suitable for patterned glass.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    English language
    sale 15% off
ISO
ISO 1288-3:2016(Main)
Glass in building — Determination of the bending strength of glass — Part 3: Test with specimen supported at two points (four point bending)

ISO 1288-3:2016 specifies a method for determining the bending strength, including the effects of the edges, of flat glass for use in building. The method specified can also be used to determine the bending strength of the edges of glass separately. The limitations of this part of ISO 1288 are described in ISO 1288‑1.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    8 pages
    English language
    sale 15% off
ISO
ISO 1288-4:2016(Main)
Glass in building — Determination of the bending strength of glass — Part 4: Testing of channel shaped glass

ISO 1288-4:2016 specifies a method for determining the bending strength (defined as the profile bending strength) of wired or unwired channel shaped glass for use in buildings. The limitations of this part of ISO 1288 are described in ISO 1288‑1.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    8 pages
    English language
    sale 15% off
ISO
ISO 29584:2015(Main)
Glass in building — Pendulum impact testing and classification of safety glass

The purpose of ISO 29584:2015 is to evaluate, by means of soft body impactors, safe breakage characteristics of glazing products intended to reduce cutting and piercing injuries to persons through accidental impact. ISO 29584:2015 examines test methods currently employed to determine the pendulum impact performance of safety glass. Use of the methodologies in this International Standard improves the reproducibility of test results and gives a common basis of classification. The aim is for the performance of glass products manufactured and tested in various countries to be better understood and more consistent. Two types of soft body impactors are defined. The traditional shot bag impactor is detailed both in terms of manufacture and maintenance in an attempt to overcome problems associated with such impactors becoming misshapen. The twin tyre impactor is also detailed. The test equipment, excluding the impactor, is also described. A method of calibrating the test frame is given. The benefit of calibrating the test equipment is the increased reproducibility of the test results. Classification of glass products is also detailed. The classification system allows information on the following to be given: a) the maximum drop height at which the glass either did not break or broke safely, i.e. in a manner similar to laminated glass or toughened glass; b) the manner in which the glass would break, i.e. as toughened glass, laminated glass, annealed glass, irrespective of whether or not the glass was broken during the test; c) the maximum drop height at which the glass either did not break or broke safely, i.e. in a manner similar to laminated glass. ISO 29584:2015 does not specify the intended use of the products, but provides a method of classification in terms of the performance of the materials being tested. The impact energy used for the various levels of classification are designed to provide the intended user or the legislator with the information to assist in defining the level of safety and protection required relative to the intended location at which the selected safety glass is to be used.

  • Standard
    40 pages
    English language
    sale 15% off
ISO
ISO 28278-1:2011(Main)
Glass in building — Glass products for structural sealant glazing — Part 1: Supported and unsupported monolithic and multiple glazing

ISO 28278-1:2011 specifies requirements for the suitability of supported and unsupported glass products for use in the structural sealant glazing (SSG) technique. Regarding glass products, ISO 28278-1:2011 constitutes a supplement to the requirements specified in the corresponding international standards with regard to verifying suitability for use in SSG systems. Only soda lime silicate glass is taken into consideration in ISO 28278-1:2011. The glass products are installed and bonded into the support under controlled environmental conditions as described in ISO 28278-2. Plastic glazing is excluded from the scope of ISO 28278-1:2011. The structural weatherproofing and sealant and outer seal of IGU products, which are commonly used in structural glazing applications are those based on organo-siloxane,"silicone" polymers, and recommended for use by the sealant manufacturer. Where there is a risk of earthquakes, the sealant design may not be sufficient to resist the loads, and complementary arrangements may be necessary. ISO 28278-1:2011 does not preclude the use of other sealant types where these can demonstrate suitability for service according to ISO 28278-1:2011 and when used following the recommendations of the sealant manufacturer.

  • Standard
    63 pages
    English language
    sale 15% off
ISO
ISO 28278-2:2010(Main)
Glass in building — Glass products for structural sealant glazing — Part 2: Assembly rules

ISO 28278-2:2010 gives guidelines for the assembly and bonding of glass elements in a frame, window, door or curtain-walling construction, or directly into the building by means of structural bonding of the glass element into or onto the framework or directly into the building. It gives the assembler information that enables him to organize his work and comply with requirements regarding quality control. Quality control of the assembly process is of the highest importance. ISO 28278-2:2010 provides the minimum requirements for acceptable quality control of the process of structural sealant glazing (SSG) on a single project. The annexes contained at the end of ISO 28278-2:2010 provide the methods to ensure proper application and documentation for a safe and weatherproof glazing assembly product. This process is intended to be applicable to most SSG projects. The project testing on metal substrates and glass products will determine proper surface preparation and installation instructions. These rules do not apply to the adhesion or durability of the paint finishes or glass products. This is not intended to be a durability test requirement for the paint and glass products commonly used in the SSG process. The structural, weatherproofing and sealant products which are commonly used in structural glazing applications are those based on organosiloxane, "silicone" polymers. ISO 28278-2:2010 does not preclude the use of other sealant types, where these can demonstrate suitability for service according to ISO 28278-2:2010 and when they are used following the recommendations of the sealant manufacturer.

  • Standard
    33 pages
    English language
    sale 15% off