IEC 62453-303-1:2009
(Main)Field device tool (FDT) interface specification - Part 303-1: Communication profile integration - IEC 61784 CP 3/1 and CP 3/2
Field device tool (FDT) interface specification - Part 303-1: Communication profile integration - IEC 61784 CP 3/1 and CP 3/2
IEC 62453-303-1:2009 provides information for integrating the PROFIBUS protocol into the FDT interface specification (IEC 62453-2). This part of the IEC 62453 specifies communication and other services.
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 303-1: Intégration des profils de communication - CEI 61784 CP 3/1 et CP 3/2
La CEI 62453-303-1:2009 donne des informations pour intégrer le protocole PROFIBUS dans la spécification d'interface FDT (CEI 62453-2). La présente partie de la CEI 62453 spécifie les services de communication et autres services.
General Information
Relations
Buy Standard
Standards Content (Sample)
IEC 62453-303-1 ®
Edition 1.0 2009-06
INTERNATIONAL
STANDARD
Field device tool (FDT) interface specification –
Part 303-1: Communication profile integration – IEC 61784 CP 3/1 and CP 3/2
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 62453-303-1 ®
Edition 1.0 2009-06
INTERNATIONAL
STANDARD
Field device tool (FDT) interface specification –
Part 303-1: Communication profile integration – IEC 61784 CP 3/1 and CP 3/2
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XA
ICS 25.040.40; 35.100.05; 35.110 ISBN 978-2-88910-721-6
– 2 – 62453-303-1 © IEC:2009(E)
CONTENTS
FOREWORD.5
INTRODUCTION.7
1 Scope.8
2 Normative references .8
3 Terms, definitions, symbols, abbreviated terms and conventions .9
3.1 Terms and definitions .9
3.2 Symbols and abbreviated terms.9
3.3 Conventions .9
3.3.1 Data type names and references to data types .9
3.3.2 Vocabulary for requirements.9
3.3.3 Use of UML .9
4 Bus category .10
5 Access to instance and device data.10
5.1 Process Channel objects provided by DTM.10
5.2 DTM services to access instance and device data .10
6 Protocol specific behavior.10
6.1 PROFIBUS device model .10
6.2 Configuration and parameterization of PROFIBUS devices.11
6.2.1 General .11
6.2.2 Monolithic DTM for a modular PROFIBUS device .12
6.2.3 Modular DTM for a modular PROFIBUS device.12
6.3 Support for DPV0 configuration .13
6.4 PROFIBUS slaves operating without a cyclic PROFIBUS master .13
6.5 PROFIBUS-related information of a slave DTM .13
6.5.1 General .13
6.5.2 Bus Master Configuration Part (BMCP).14
7 Protocol specific usage of general data types .24
8 Protocol specific common data types.26
9 Network management data types.26
9.1 General .26
9.1.1 Configuration.26
9.1.2 Process Channel .27
9.1.3 Parameterization .27
9.2 Master-bus parameter set.28
9.3 Slave bus parameter set.28
9.4 Module and channel data .29
9.5 GSD information.32
9.5.1 General .32
9.5.2 GSD for gateway devices .32
10 Communication data types .33
10.1 General .33
10.2 Error information provided by Communication Channel .33
10.3 DPV0 communication .33
10.4 DPV1 communication .40
11 Channel parameter data types.43
62453-303-1 © IEC:2009(E) – 3 –
12 Device identification .46
12.1 General .46
12.2 Protocol specific handling of the data type STRING.46
12.3 Common device type identification data types .46
12.4 Topology scan data types.51
12.5 Scan identification data types.52
12.6 Device type identification data types – provided by DTM .54
12.7 Identification information in GUI .57
13 ProfiSafe .57
13.1 Motivation .57
13.2 General parameter handling .57
13.3 ProfiSafe individual device parameter .58
Bibliography.60
Figure 1 – Part 303-1 of the IEC 62453 series .7
Figure 2 – FDT PROFIBUS device model.11
Figure 3 – Example for IO data within datagrams.30
Figure 4 – F-Parameter and individual device parameter .58
Figure 5 – Data structure of ProfiSafe individual device parameters.59
Table 1 – Protocol identifiers .10
Table 2 – Physical layer identifiers.10
Table 3 – BMPC Part1 – General configuration.15
Table 4 – BMPC Part2 – Parameter data .15
Table 5 – BMPC Part3 – Configuration data.16
Table 6 – Part 4: Address table and slave user parameters .17
Table 7 – Part 4: Extended Prm data .17
Table 8 – Complete BMCP.18
Table 9 – Protocol specific usage of general data types.24
Table 10 – Bus parameter set for master device .28
Table 11 – Bus parameter set for slave device.29
Table 12 – Signal channels within the data frame .31
Table 13 – Simple DPV0 communication data types.34
Table 14 – Structured DPV0Communication data types .34
Table 15 – Availability of services for Master Class1 (C1).39
Table 16 – Availability of services for Master Class2 (C2).39
Table 17 – Simple DPV1 communication data types.40
Table 18 – Structured DPV1 communication data types .41
Table 19 – Mapping of DPV1 data types to FDT data types.43
Table 20 – Simple ChannelParameter data types.44
Table 21 – Structured ChannelParameter data types .45
Table 22 – Identification data types with Profibus DP specific mapping.47
Table 23 – Identification data types with Profibus I&M specific mapping .48
Table 24 – Identification data types with Profibus PA specific mapping .50
– 4 – 62453-303-1 © IEC:2009(E)
Table 25 – Simple identification data types with protocol independent semantics.51
Table 26 – Structured identification data types with protocol independent semantics .51
Table 27 – Simple topology scan data types .51
Table 28 – Structured topology scan data types.51
Table 29 – Simple scan identification data types.52
Table 30 – Structured scan identification data types .52
Table 31 – Structured device identification data types.55
62453-303-1 © IEC:2009(E) – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION –
Part 303-1: Communication profile integration –
IEC 61784 CP 3/1 and CP 3/2
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (he
...
IEC 62453-303-1 ®
Edition 1.0 2009-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Field device tool (FDT) interface specification –
Part 303-1: Communication profile integration – IEC 61784 CP 3/1 and CP 3/2
Spécification des interfaces des outils des dispositifs de terrain (FDT) –
Partie 303-1: Intégration des profils de communication – CEI 61784 CP 3/1
et CP 3/2
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.
IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
Liens utiles:
Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: csc@iec.ch.
IEC 62453-303-1 ®
Edition 1.0 2009-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Field device tool (FDT) interface specification –
Part 303-1: Communication profile integration – IEC 61784 CP 3/1 and CP 3/2
Spécification des interfaces des outils des dispositifs de terrain (FDT) –
Partie 303-1: Intégration des profils de communication – CEI 61784 CP 3/1
et CP 3/2
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XA
ICS 25.040.40; 35.100.05; 35.110 ISBN 978-2-83220-379-8
– 2 – 62453-303-1 IEC:2009
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms, definitions, symbols, abbreviated terms and conventions . 9
3.1 Terms and definitions . 9
3.2 Symbols and abbreviated terms. 9
3.3 Conventions . 9
3.3.1 Data type names and references to data types . 9
3.3.2 Vocabulary for requirements . 9
3.3.3 Use of UML . 9
4 Bus category . 10
5 Access to instance and device data . 10
5.1 Process Channel objects provided by DTM . 10
5.2 DTM services to access instance and device data . 10
6 Protocol specific behavior . 10
6.1 PROFIBUS device model . 10
6.2 Configuration and parameterization of PROFIBUS devices . 11
6.2.1 General . 11
6.2.2 Monolithic DTM for a modular PROFIBUS device . 12
6.2.3 Modular DTM for a modular PROFIBUS device . 12
6.3 Support for DPV0 configuration . 13
6.4 PROFIBUS slaves operating without a cyclic PROFIBUS master . 13
6.5 PROFIBUS-related information of a slave DTM . 13
6.5.1 General . 13
6.5.2 Bus Master Configuration Part (BMCP) . 14
7 Protocol specific usage of general data types . 24
8 Protocol specific common data types . 26
9 Network management data types . 26
9.1 General . 26
9.1.1 Configuration . 26
9.1.2 Process Channel . 27
9.1.3 Parameterization . 27
9.2 Master-bus parameter set . 28
9.3 Slave bus parameter set . 28
9.4 Module and channel data . 29
9.5 GSD information . 32
9.5.1 General . 32
9.5.2 GSD for gateway devices . 32
10 Communication data types . 33
10.1 General . 33
10.2 Error information provided by Communication Channel . 33
10.3 DPV0 communication . 33
10.4 DPV1 communication . 40
11 Channel parameter data types . 43
62453-303-1 IEC:2009 – 3 –
12 Device identification . 46
12.1 General . 46
12.2 Protocol specific handling of the data type STRING . 46
12.3 Common device type identification data types . 46
12.4 Topology scan data types . 51
12.5 Scan identification data types . 52
12.6 Device type identification data types – provided by DTM . 54
12.7 Identification information in GUI . 57
13 ProfiSafe . 57
13.1 Motivation . 57
13.2 General parameter handling . 57
13.3 ProfiSafe individual device parameter . 58
Bibliography . 60
Figure 1 – Part 303-1 of the IEC 62453 series . 7
Figure 2 – FDT PROFIBUS device model . 11
Figure 3 – Example for IO data within datagrams . 30
Figure 4 – F-Parameter and individual device parameter . 58
Figure 5 – Data structure of ProfiSafe individual device parameters . 59
Table 1 – Protocol identifiers . 10
Table 2 – Physical layer identifiers . 10
Table 3 – BMPC Part1 – General configuration . 15
Table 4 – BMPC Part2 – Parameter data . 15
Table 5 – BMPC Part3 – Configuration data . 16
Table 6 – Part 4: Address table and slave user parameters . 17
Table 7 – Part 4: Extended Prm data . 17
Table 8 – Complete BMCP . 18
Table 9 – Protocol specific usage of general data types . 24
Table 10 – Bus parameter set for master device . 28
Table 11 – Bus parameter set for slave device . 29
Table 12 – Signal channels within the data frame . 31
Table 13 –
...
IEC 62453-303-1 ®
Edition 1.1 2016-06
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Field device tool (FDT) interface specification –
Part 303-1: Communication profile integration – IEC 61784 CP 3/1 and CP 3/2
Spécification des interfaces des outils des dispositifs de terrain (FDT) –
Partie 303-1: Intégration des profils de communication – IEC 61784 CP 3/1
et CP 3/2
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 15 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.
IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and
CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient 20 000 termes et définitions en anglais
Spécifications techniques, Rapports techniques et autres
et en français, ainsi que les termes équivalents dans 15
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.
Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
La recherche avancée permet de trouver des publications IEC
65 000 entrées terminologiques électrotechniques, en anglais
en utilisant différents critères (numéro de référence, texte,
et en français, extraites des articles Termes et Définitions des
comité d’études,…). Elle donne aussi des informations sur les
publications IEC parues depuis 2002. Plus certaines entrées
projets et les publications remplacées ou retirées.
antérieures extraites des publications des CE 37, 77, 86 et
CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished
Restez informé sur les nouvelles publications IEC. Just Service Clients - webstore.iec.ch/csc
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
csc@iec.ch.
IEC 62453-303-1 ®
Edition 1.1 2016-06
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Field device tool (FDT) interface specification –
Part 303-1: Communication profile integration – IEC 61784 CP 3/1 and CP 3/2
Spécification des interfaces des outils des dispositifs de terrain (FDT) –
Partie 303-1: Intégration des profils de communication – IEC 61784 CP 3/1
et CP 3/2
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40; 35.100.05; 35.110 ISBN 978-2-8322-3498-3
IEC 62453-303-1 ®
Edition 1.1 2016-06
CONSOLIDATED VERSION
REDLINE VERSION
VERSION REDLINE
colour
inside
Field device tool (FDT) interface specification –
Part 303-1: Communication profile integration – IEC 61784 CP 3/1 and CP 3/2
Spécification des interfaces des outils des dispositifs de terrain (FDT) –
Partie 303-1: Intégration des profils de communication – IEC 61784 CP 3/1
et CP 3/2
– 2 – IEC 62453-303-1:2009+AMD1:2016 CSV
IEC 2016
CONTENTS
FOREWORD. 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms, definitions, symbols, abbreviated terms and conventions . 9
3.1 Terms and definitions . 9
3.2 Symbols and abbreviated terms . 9
3.3 Conventions . 10
3.3.1 Data type names and references to data types . 10
3.3.2 Vocabulary for requirements . 10
3.3.3 Use of UML . 10
4 Bus category . 10
5 Access to instance and device data . 11
5.1 Process Channel objects provided by DTM . 11
5.2 DTM services to access instance and device data . 11
6 Protocol specific behavior . 11
6.1 PROFIBUS device model . 11
6.2 Configuration and parameterization of PROFIBUS devices . 12
6.2.1 General . 12
6.2.2 Monolithic DTM for a modular PROFIBUS device . 13
6.2.3 Modular DTM for a modular PROFIBUS device . 13
6.3 Support for DPV0 configuration . 14
6.4 PROFIBUS slaves operating without a cyclic PROFIBUS master . 14
6.5 PROFIBUS-related information of a slave DTM . 14
6.5.1 General . 14
6.5.2 Bus Master Configuration Part (BMCP) . 15
7 Protocol specific usage of general data types . 25
8 Protocol specific common data types . 27
9 Network management data types . 27
9.1 General . 27
9.1.1 Configuration . 27
9.1.2 Process Channel . 28
9.1.3 Parameterization . 28
9.2 Master-bus parameter set . 29
9.3 Slave bus parameter set . 29
9.4 Module and channel data . 30
9.5 GSD information . 33
9.5.1 General . 33
9.5.2 GSD for gateway devices . 33
10 Communication data types . 34
10.1 General . 34
10.2 Error information provided by Communication Channel . 34
10.3 DPV0 communication . 34
10.4 DPV1 communication . 41
11 Channel parameter data types . 44
IEC 2016
12 Device identification . 47
12.1 General . 47
12.2 Protocol specific handling of the data type STRING . 47
12.3 Common device type identification data types . 47
12.4 Topology scan data types . 52
12.5 Scan identification data types . 52
12.6 Device type identification data types – provided by DTM . 55
12.7 Identification information in GUI . 58
13 ProfiSafe . 58
13.1 Motivation . 58
13.2 General parameter handling . 58
13.3 ProfiSafe individual device parameter . 59
Bibliography . 61
Figure 1 – Part 303-1 of the IEC 62453 series . 7
Figure 2 – FDT PROFIBUS device model . 12
Figure 3 – Example for IO data within datagrams . 31
Figure 4 – F-Parameter and individual device parameter .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.