iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 63047:2018/COR1:2020

(Corrigendum)

Corrigendum 1 - Nuclear instrumentation - Data format for list mode digital data acquisition used in radiation detection and measurement

Corrigendum 1 - Nuclear instrumentation - Data format for list mode digital data acquisition used in radiation detection and measurement

Corrigendum 1 - Instrumentation nucléaire - Format de données pour l'acquisition de données numériques en mode liste utilisées dans la détection et la mesure des rayonnements

General Information

Status
Published
Publication Date
13-Apr-2020
ICS
27.120.01 - Nuclear energy in general
Technical Committee
TC 45 - Nuclear instrumentation
Current Stage
PPUB - Publication issued
Start Date
24-Dec-2019
Completion Date
14-Apr-2020
Ref Project

Buy Standard

iec63047-cor1{ed1.0}b - IEC 63047:2018/COR1:2020 - Corrigendum 1 - Nuclear instrumentation - Data format for list mode digital data acquisition used in radiation detection and measurement Released:4/14/2020iec63047-cor1{ed1.0}b - IEC 63047:2018/COR1:2020 - Corrigendum 1 - Nuclear instrumentation - Data format for list mode digital data acquisition used in radiation detection and measurement Released:4/14/2020
PreviousNext
Standard
iec63047-cor1{ed1.0}b - IEC 63047:2018/COR1:2020 - Corrigendum 1 - Nuclear instrumentation - Data format for list mode digital data acquisition used in radiation detection and measurement Released:4/14/2020
English and French language
1 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


 IEC 2020
INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
IEC 63047 IEC 63047
Edition 1.0  2018-10 Édition 1.0  2018-10

Nuclear instrumentation – Data format for list mode
Instrumentation nucléaire – Format de données pour
digital data acquisition used in radiation detection
l'acquisition de données numériques en mode liste
and measurement
utilisées dans la détection et la mesure des

rayonnements
CO RRI G E NDUM 1
At the end of the foreword, add the A la fin de l'avant-propos, ajouter ce qui
following: suit:
NOTE This publication contains an attached file in NOTE La présente publication contient un fichier
the form of an .asn file, whose content is identical to joint de type .asn, dont le contenu est identique à
that of Annex A. This file is intended to be use
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 63175:2021(Main)
Fixed energy high intensity proton cyclotron within the energy range of 10 MeV to less than 30 MeV

IEC 63175:2021 is applicable to hydrogen ion H- acceleration proton cyclotrons with one or more fixed energies within the range of 10 MeV to less than 30 MeV and a beam intensity equal to or greater than 300 μA. This document specifies the performance and safety requirements, structure, technical requirements, test methods, identification, packing, transportation, storage and accompanying documents for such cyclotrons. This document is intended for manufacturers of high intensity proton cyclotron within the energy range of 10 MeV to less than 30 MeV, and responsible organizations where such cyclotrons are installed.

  • Standard
    24 pages
    English language
    sale 15% off
IEC
IEC 62976:2017(Main)
Industrial non-destructive testing equipment - Electron linear accelerator

IEC 62976:2017 gives the rules of naming, technical requirements, test methods, inspection, marking, packaging, transportation, storage and accompanying documents for electron linear accelerator equipment for Non-Destructive Testing (NDT). This document applies to NDT electron linear accelerator equipment in the X-ray energy range of 1 MeV to 15 MeV, including the accelerator equipment for radiographic film, computed radiography with imaging plates, real-time imaging, digital detector array and industrial computerized tomography.

  • Standard
    46 pages
    English and French language
    sale 15% off
  • Standard
    92 pages
    English and French language
    sale 15% off
IEC
IEC 62976:2017/AMD1:2021(Amendment)
Amendment 1 - Industrial non-destructive testing equipment - Electron linear accelerator
  • Standard
    8 pages
    English and French language
    sale 15% off
IEC
IEC 63148:2021(Main)
Tracking systems for radioactive materials - Requirements

IEC 63148:2021 specifies the requirements of tracking systems for radioactive materials. Such systems identify and locate the position of the radioactive materials transported using global navigation satellite systems (GNSS) and radio frequency identification (RFID).
The system provides a set of safety controls of the radioactive material, by which the transporter can improve safety during transportation. This document may also be used as supplementary guidance to the regulatory body.

  • Standard
    32 pages
    English and French language
    sale 15% off
IEC
IEC 62372:2021(Main)
Nuclear instrumentation - Housed scintillators - Test methods of light output and intrinsic resolution

IEC 62372:2021 is applicable to housed scintillators for registration and spectrometry of alpha-, beta-, gamma-, X-ray and neutron radiation. This document specifies the requirements for the testing equipment and test methods of the basic parameters, of housed scintillators, such as:
- the direct method is applicable to measure the light output of housed scintillators based on scintillation material. The housed scintillators certified by this method can be used as working standard of housed scintillators (hereinafter: working standard) when performing measurements by a relative method of comparison.
- the relative method of comparison with the working standard is applicable to housed scintillators based on the same scintillation material as the working standard.
This second edition cancels and replaces the first edition published in 2006. This edition includes the following significant technical changes with respect to the previous edition:
- Title has been modified.
- To review the existing requirements and to update the terminology, definitions and normative references.

  • Standard
    19 pages
    English language
    sale 15% off
  • Standard
    37 pages
    English and French language
    sale 15% off
IEC
IEC 63048:2020(Main)
Mobile remotely controlled systems for nuclear and radiological applications - General requirements

IEC 63048:2020 defines the general requirements for Mobile Remotely Controlled Systems (MRCSs) for nuclear and radiological applications such as integrity inspections, repair of components, handling of radioactive materials, and monitoring of physical conditions and radiation dose intensity in specific areas.
This document applies to MRCSs that are used to support nuclear and radiological facilities. These general requirements encompass high-level performance requirements regarding sensors, monitoring devices, control devices, interfacing mechanisms, simulation methods, and verification methods thereof in a normal environment or extreme environmental conditions, such as high radiation, high temperature, and high humidity environments.

  • Standard
    51 pages
    English and French language
    sale 15% off
IEC
IEC 60412:2014(Main)
Nuclear instrumentation - Nomenclature (identification) of scintillators and scintillation detectors and standard dimensions of scintillators

IEC 60412:2014 gives guidelines for scintillation detectors and scintillators nomenclature (identification) and standard dimensions of scintillators. This International Standard is applicable to all types of solid organic and inorganic scintillators used in detectors for scintillation counting and spectrometry. The object of this standard is to define a standardized nomenclature for scintillation detectors in which most of the properties can be found. The object of this standard is also to standardize the dimensions of bare scintillators in order to facilitate interchangeability of non-encapsulated scintillators and to facilitate intercomparisons of measurements with encapsulated scintillators. The main technical changes with regard to the previous edition are as follows:
- nomenclature of scintillation detectors was expanded by phoswich detector and single-line multi-channel detector;
- some missing positions in the nomenclature of the previous edition were filled out.

  • Standard
    24 pages
    English and French language
    sale 15% off
IEC
IEC 61435:2013(Main)
Nuclear instrumentation - High-purity germanium crystals for radiation detectors - Measurement methods of basic characteristics

IEC 61435:2013(E) is applicable to high-purity germanium crystals used for radiation detectors for gamma-rays and X-rays. Such germanium is monocrystalline and has a net concentration of fewer than 1011 electrically active impurity centers per cm3. This International Standard specifies terminology and test methods for measurements of basic characteristics of high-purity germanium crystals. Test methods for completed assembled germanium detectors are given in IEC 60973 and IEC 60759. The main technical changes with regard to the previous edition are as follows:
- review the existing requirements;
- update the terminology and definitions.

  • Standard
    32 pages
    English language
    sale 15% off
IEC
IEC 62495:2011(Main)
Nuclear instrumentation - Portable X-ray fluorescence analysis equipment utilizing a miniature X-ray tube

IEC 62495:2011(E) is applicable to the radiological safety of portable handheld X-ray fluorescence (XRF) analysis equipment utilizing a miniature X-ray tube as the source of ionizing radiation for industrial applications. Establishes performance specifications for general radiation, electrical, safety and environmental characteristics of the design and operation, and test methods in relation to radiological safety for portable XRF analysis equipment utilizing a miniature X-ray tube. The proposed performance specifications are aimed at minimizing and avoiding the health risk associated with the use of these devices.

  • Standard
    19 pages
    English language
    sale 15% off
IEC
IEC 62598:2011(Main)
Nuclear instrumentation - Constructional requirements and classification of radiometric gauges

IEC 62598:2011 applies to the manufacture and installation of electrical measuring systems and instruments utilizing radioactive sources (radiometric gauges, hereinafter called gauges). It also applies to source housings intended for use in the aforementioned measuring systems. This standard applies to equipment, which is not related to power production or to the fuel cycle. It specifies constructional requirements for the design of instruments utilizing radioactive sources in regard of radiation protection. This standards cancels and replaces IEC 60405.

  • Standard
    24 pages
    English language
    sale 15% off
  • Standard
    48 pages
    English and French language
    sale 15% off