IEC 60068-2-21:2006/COR1:2012
(Corrigendum)Corrigendum 1 - Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
Corrigendum 1 - Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
Corrigendum 1 - Essais d'environnement - Partie 2-21: Essais - Essai U: Robustesse des sorties et des dispositifs de montage incorporés
General Information
Relations
Standards Content (Sample)
IEC 60068-2-21 CEI 60068-2-21
(Sixth edition – 2006) (Sixième édition – 2006)
Environmental testing – Essais d'environnement –
Part 2-21:Tests – Test U: Robustness of Partie 2-21: Essais – Essai U: Robustesse des
terminations and integral mounting devices sorties et des dispositifs de montage incorporés
CO RRI G E NDUM 1
5.5.
...
This May Also Interest You
IEC TR 60068-3-15:2024 describes vacuum-assisted soldering considering the thermal profiling, soldering methods, suitability of the components and vacuum features of soldering systems. It is based on practical experiences from manufacturers, component, material, and soldering systems suppliers. It supports manufacturers by providing information about the functionality of vacuum and effect of vacuum on components performance.
- Technical report27 pagesEnglish languagesale 15% off
IEC TR 60068-3-12:2022(E) which is a Technical Report, describes the creation of temperature-time profiles (in specific envelope profiles) for reflow soldering of electronic assemblies, considering tolerances resulting from the accuracy of the measuring equipment, preparation method and specifications of the manufacturers of components, circuit boards, solder paste, etc.).
This edition includes the following significant technical changes with respect to the previous edition: a) Extended purpose Guidance is added on how to create a reflow profile considering the tolerances resulting from the accuracy of the measuring equipment, preparation method and specifications of the component manufacturers (components, PCB, solder paste, etc.). b) Distinction from existing standards The envelope profile given in this document does not represent a temperature-time profile for the qualification of materials but defines the reflow process limits for the soldering of electronic assemblies.
The schematic temperature-time-limit curves of the envelope profile are derived from generally valid findings (literature data). Additionally, tolerance considerations are given for all envelope points of the envelope profile.
In contrast to IEC TR 60068-3-12:2014, the creation of the envelope profile is not primarily linked to a concrete example. c) Subclause 8.2 presents an approach for establishing a possible temperature profile for a lead-free reflow soldering process using SnAgCu solder paste that is taken from IEC TR 60068-3-12:2014. d) Synergies with existing standards Limit values and tolerances from standards and guidelines for the qualification of materials are included in this document and are listed as examples in the references.
- Technical report34 pagesEnglish languagesale 15% off
IEC 60068-2-21:2021 is applicable to all electrical and electronic components whose terminations or integral mounting devices are liable to be submitted to stresses during normal assembly or handling operations and is also applicable to surface mount devices (SMDs).
This seventh edition cancels and replaces the sixth edition, published in 2006, and IEC 60068‑2‑77:1999. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
integration of parts of IEC 60068-2-77 (see Annex X); IEC 60068-2-77 is withdrawn with the publication of this document;
Annex X is added to show the correlation of the clauses and subclauses in this edition of IEC 60068-2-21 with the clauses in IEC 60068-2-21:2006 and IEC 60068-2-77:1999.
- Standard86 pagesEnglish and French languagesale 15% off
IEC 60068-2-69:2017 outlines test Te/Tc, the solder bath wetting balance method and the solder globule wetting balance method to determine, quantitatively, the solderability of the terminations. Data obtained by these methods are not intended to be used as absolute quantitative data for pass–fail purposes.
The procedures describe the solder bath wetting balance method and the solder globule wetting balance method. They are applicable to components and printed boards with metallic terminations and metallized solder pads.
This document provides the measurement procedures for solder alloys both with and without lead (Pb).
This edition includes the following significant technical changes with respect to the previous edition:
- integration of IEC 60068-2-54;
- inclusion of tests of printed boards;
- inclusion of new component types, and updating test parameters for the whole component list;
- inclusion of a new gauge R & R test protocol to ensure that the respective wetting balance equipment is correctly calibrated.
The contents of the corrigendum of January 2018 have been included in this copy.
- Standard110 pagesEnglish and French languagesale 15% off
- Standard226 pagesEnglish and French languagesale 15% off
- Standard13 pagesEnglish and French languagesale 15% off
- Standard6 pagesEnglish and French languagesale 15% off
- Standard7 pagesEnglish languagesale 15% off
- Standard16 pagesEnglish and French languagesale 15% off
IEC 60068-2-58:2015 outlines test Td, applicable to surface mounting devices (SMD). This standard provides procedures for determining the solderability and resistance to soldering heat of devices in applications using solder alloys, which are eutectic or near eutectic tin lead (Pb), or lead-free alloys. The procedures use either a solder bath or reflow method and are applicable only to specimens or products designed to withstand short term immersion in molten solder or limited exposure to reflow systems. The solder bath method is applicable to SMDs designed for flow soldering and SMDs designed for reflow soldering when the solder bath (dipping) method is appropriate. The reflow method is applicable to the SMD designed for reflow soldering, to determine the suitability of SMDs for reflow soldering and when the solder bath (dipping) method is not appropriate. This edition includes the following significant technical changes with respect to the previous edition:
- the addition of Sn-Bi low temperature solder alloy;
- the addition of several reflow test conditions in Table 7 - Resistance to soldering heat - Test conditions and severity, reflow method;
- introduction of reflow test method for Test Td3: Dewetting and resistance to dissolution of metallization;
- implementation of guidance for the choice of a test severity in Clause B.3.
- Standard73 pagesEnglish languagesale 15% off
- Standard75 pagesEnglish and French languagesale 15% off
- Standard151 pagesEnglish and French languagesale 15% off
IEC 60068-2-83:2011 provides methods for comparative investigation of the wettability of the metallic terminations or metallized terminations of SMDs with solder pastes. Data obtained by these methods are not intended to be used as absolute quantitative data for pass - fail purposes.
NOTE: Different solderability test methods for SMD are described in IEC 60068-2-58 and IEC 60068-2-69. IEC 60068-2-58 prescribes visual evaluation using solder bath and reflow method, IEC 60068-2-69 prescribes wetting balance evaluation using solder bath and solder globule method.
- Standard76 pagesEnglish and French languagesale 15% off
IEC 60068-2-69:2007 outlines test Te, solder bath wetting balance method and solder globule wetting balance method, applicable for surface mounting devices. These methods determine quantitatively the solderability of terminations on surface mounting devices. IEC 60068-2-54 is also available for surface mounting devices and should be consulted if applicable. The procedures describe the solder bath wetting balance method and the solder globule wetting balance method and are both applicable to components with metallic terminations and metallized solder pads. This standard provides the standard procedures for solder alloys containing lead (Pb) and for lead-free solder alloys. This second edition cancels and replaces the first edition published in 1995 and constitutes a technical revision. The main changes from the previous edition are as follows:
- Inclusion of lead-free alloy test conditions;
- Inclusion of new fluxes for testing, reflecting development of fluxes that have happened in the industry in the past 20 years;
- Inclusion of new component types, and updating test parameters for the whole component list.
- Standard25 pagesEnglish languagesale 15% off
- Standard50 pagesEnglish and French languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.