Fibre optic communication subsystem test procedures - Part 4-4: Cable plants and links - Polarization mode dispersion measurement for installed links

IEC 61280-4-4:2017 provides uniform methods of measuring polarization mode dispersion (PMD) of single-mode installed links. An installed link is the optical path between transmitter and receiver, or a portion of that optical path. These measurements can be used to assess the suitability of a given link for high bit rate applications, or to provide insight on the relationships of various related transmission attributes. This document focuses on the measurement methods and requirements for measuring long lengths of installed cabling that can also include other optical elements, such as splices, connectors, amplifiers, chromatic dispersion compensating modules, dense wavelength division multiplexing or multiplexer (DWDM) components, multiplexers, wavelength selective switches, re-configurable optical add drop multiplexer (ROADMS). This document focuses on the apparatus, procedures, and calculations needed to complete measurements. IEC TR 61282-9 explains the theory behind the test methods. This second edition cancels and replaces the first edition published in 2006. This second edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- theory is removed and replaced with a reference to IEC TR 61282-9;
- a new method, wavelength scanning OTDR and SOP analysis (WSOSA), is added as Annex G;
- a brief description of each method is added to Clause 5;
- Methods E and F are converted to informative Annexes E and F;
- a new Clause (6) on measurement configurations is added;
- a new Clause (7) on measurement considerations is added;
- Clause 10 on procedure is expanded;
- several of the apparatus diagrams are improved;
- several clarifications about what is measured and what is calculated have been made in Annex H.

Procédures d’essai des sous-systèmes de télécommunication fibroniques - Partie 4-4 : Installations de câbles et liaisons - Mesure de la dispersion de mode de polarisation pour les liaisons installées

IEC 61280-4-4: 2017 fournit des méthodes uniformes de mesure de la dispersion de mode de polarisation (PMD) de liaisons unimodales installées. Une liaison installée est le chemin optique entre l’émetteur et le récepteur ou une partie de ce chemin optique. Ces mesures peuvent être utilisées afin d’évaluer si une liaison donnée est adaptée à des applications à débit binaire élevé ou pour connaître les relations entre différents attributs connexes d’une transmission. Le présent document se concentre sur les méthodes de mesure et les exigences relatives à la mesure de grandes longueurs d’une installation câblée qui peut également inclure d’autres éléments optiques, tels que des épissures, des connecteurs, des amplificateurs, des modules de compensation de dispersion chromatique, des composants de multiplexage ou multiplexeurs par répartition en longueur d'onde dense (DWDM – dense wavelength division multiplexing or multiplexer), des multiplexeurs, des commutateurs sélectifs en longueur d'onde, ainsi qu’un multiplexeur optique d’insertion-extraction reconfigurable (ROADMS – re-configurable optical add drop multiplexer). Le présent document se concentre sur l’appareillage, les procédures et les calculs nécessaires pour effectuer des mesures. L’IEC TR 61282-9 explique la théorie qui régit les méthodes d’essai. Cette deuxième édition annule et remplace la première édition parue en 2006. Cette deuxième édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
· suppression de la théorie et remplacement par une référence à l’IEC TR 61282-9;
· ajout, en tant qu’Annexe G, d’une nouvelle méthode,
· à savoir analyse OTDR et SOP par balayage de longueur d'onde (WSOSA);
· ajout d’une description succincte de chaque méthode à l’Article 5;
· conversion des méthodes E et F en Annexes E et F informatives;
· ajout d’un nouvel Article (6) sur les configurations de mesure;
· ajout d’un nouvel Article (7) sur les considérations de mesure;
· extension de l’Article 10 sur la procédure;
· amélioration de plusieurs diagrammes dédiés à l’appareillage;
· plusieurs clarifications internes à l’Annexe H portant sur les mesures et les calculs effectués.
La présente version bilingue (2020-09) correspond à la version anglaise monolingue publiée en 2017-03.

General Information

Status
Published
Publication Date
06-Mar-2017
Current Stage
PPUB - Publication issued
Start Date
24-Mar-2017
Completion Date
07-Mar-2017
Ref Project

Relations

Buy Standard

Standard
IEC 61280-4-4:2017 - Fibre optic communication subsystem test procedures - Part 4-4: Cable plants and links - Polarization mode dispersion measurement for installed links
English language
82 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
IEC 61280-4-4:2017 - Fibre optic communication subsystem test procedures - Part 4-4: Cable plants and links - Polarization mode dispersion measurement for installed links
English and French language
169 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 61280-4-4 ®
Edition 2.0 2017-03
INTERNATIONAL
STANDARD
colour
inside
Fibre optic communication subsystem test procedures –
Part 4-4: Cable plants and links – Polarization mode dispersion measurement
for installed links
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
IEC 61280-4-4 ®
Edition 2.0 2017-03
INTERNATIONAL
STANDARD
colour
inside
Fibre optic communication subsystem test procedures –

Part 4-4: Cable plants and links – Polarization mode dispersion measurement

for installed links
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.180.01 ISBN 978-2-8322-4077-9

– 2 – IEC 61280-4-4:2017  IEC 2017
CONTENTS
FOREWORD . 7
INTRODUCTION . 9
1 Scope . 10
2 Normative references . 10
3 Terms, definitions, symbols and abbreviated terms . 10
3.1 Terms and definitions . 10
3.2 Symbols and abbreviated terms . 11
4 Background on PMD properties . 12
5 Measurement methods . 13
5.1 Methods of measuring PMD . 13
5.1.1 General . 13
5.1.2 Method A: Fixed analyzer with Fourier transformation (FA-FT) . 14
5.1.3 Method B: Stokes parameters evaluation (SPE) . 14
5.1.4 Method C: Interferometric . 15
5.1.5 Method D: Stokes parameter evaluation using back-reflected light . 15
5.1.6 Method E: Modulated phase-shift technique . 15
5.1.7 Method F: Polarization phase shift (PPS) . 15
5.1.8 Method G: Wavelength scanning OTDR and SOP Analysis (WSOSA) . 16
5.2 Document structure . 16
5.3 Reference test method . 16
6 Measurement configurations . 16
6.1 Passive cabling link . 16
6.2 Link including amplifiers . 17
6.3 Link including chromatic dispersion compensating modules . 17
6.3.1 General . 17
6.3.2 Grating based DCM . 17
6.4 Link including ROADMs . 17
6.4.1 General . 17
6.4.2 Multi-channel point to point configuration . 18
6.4.3 Single channel configuration . 18
7 Measurement considerations . 18
7.1 General . 18
7.2 Wavelength range . 18
7.3 PMD measurement range. 18
7.4 Measurement dynamic range . 19
7.5 Fibre movement . 19
7.6 Input and output SOP scrambling . 19
7.6.1 General . 19
7.6.2 Polarizers/scramblers . 19
7.6.3 The 9-states Mueller set . 20
7.6.4 Random scrambling . 20
7.7 Polarization dependent loss . 20
7.8 Amplifier considerations . 20
7.8.1 General . 20
7.8.2 Optical isolators . 20
7.8.3 Wavelength range . 20

7.8.4 Power levels . 20
7.8.5 Amplified spontaneous emission (ASE) noise . 21
7.9 Considerations on location of equipment . 21
8 Apparatus . 21
8.1 General . 21
8.2 Light source and polarizers . 21
8.3 Input optics . 22
8.4 Cladding mode stripper . 22
8.5 High-order mode filter . 22
8.6 Output connection . 22
8.7 Output optics . 23
8.8 Detector . 23
8.9 Computer or test platform . 23
8.10 Means to reduce the effects of amplified spontaneous emission . 23
9 Sampling and specimens . 23
10 Procedure . 23
11 Calculation or interpretation of results . 24
12 Documentation . 24
12.1 Information required for each measurement . 24
12.2 Information to be available . 24
13 Specification information . 25
Annex A (normative) Fixed analyzer method . 26
A.1 Apparatus . 26
A.1.1 Block diagrams . 26
A.1.2 Light source . 28
A.1.3 Analyzer . 29
A.1.4 Optional polarization control at the input and output of the link under
test . 29
A.2 Procedure . 29
A.2.1 Wavelength range and increment . 29
A.2.2 Complete the scans . 30
A.3 Calculations – Fourier transform . 31
A.3.1 General . 31
A.3.2 Data pre-processing and Fourier transformation . 32
A.3.3 Transform data fitting. 32
A.3.4 Spectral range . 34
Annex B (normative) Stokes parameter evaluation method . 36
B.1 Apparatus . 36
B.1.1 Block diagrams . 36
B.1.2 Light source . 37
B.1.3 Polarimeter . 37
B.2 Procedure . 37
B.3 Calculations . 38
B.3.1 General . 38
B.3.2 Jones matrix eigenanalysis (JME) . 38
B.3.3 Poincaré sphere analysis (PSA) DGD calculation . 40
Annex C (normative) Interferometric method . 41
C.1 General .
...


IEC 61280-4-4 ®
Edition 2.0 2017-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Fibre optic communication subsystem test procedures –
Part 4-4: Cable plants and links – Polarization mode dispersion measurement for
installed links
Procédures d’essai des sous-systèmes de télécommunication fibroniques –
Partie 4-4: Installations de câbles et liaisons – Mesure de la dispersion de mode
de polarisation pour les liaisons installées

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and once 67 000 electrotechnical terminology entries in English and
a month by email. French extracted from the Terms and Definitions clause of IEC
publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or need CISPR.

further assistance, please contact the Customer Service

Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - Le premier dictionnaire d'électrotechnologie en ligne au monde,
webstore.iec.ch/advsearchform avec plus de 22 000 articles terminologiques en anglais et en
La recherche avancée permet de trouver des publications IEC français, ainsi que les termes équivalents dans 16 langues
en utilisant différents critères (numéro de référence, texte, additionnelles. Egalement appelé Vocabulaire
comité d’études,…). Elle donne aussi des informations sur les Electrotechnique International (IEV) en ligne.

projets et les publications remplacées ou retirées.
Glossaire IEC - std.iec.ch/glossary
IEC Just Published - webstore.iec.ch/justpublished 67 000 entrées terminologiques électrotechniques, en anglais
Restez informé sur les nouvelles publications IEC. Just et en français, extraites des articles Termes et Définitions des
Published détaille les nouvelles publications parues. publications IEC parues depuis 2002. Plus certaines entrées
Disponible en ligne et une fois par mois par email. antérieures extraites des publications des CE 37, 77, 86 et
CISPR de l'IEC.
Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
Electropedia - www.electropedia.org

IEC 61280-4-4 ®
Edition 2.0 2017-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Fibre optic communication subsystem test procedures –

Part 4-4: Cable plants and links – Polarization mode dispersion measurement for

installed links
Procédures d’essai des sous-systèmes de télécommunication fibroniques –

Partie 4-4: Installations de câbles et liaisons – Mesure de la dispersion de mode

de polarisation pour les liaisons installées

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.01 ISBN 978-2-8322-8821-4

– 2 – IEC 61280-4-4:2017  IEC 2017
CONTENTS
FOREWORD . 7
INTRODUCTION . 9
1 Scope . 10
2 Normative references . 10
3 Terms, definitions, symbols and abbreviated terms . 10
3.1 Terms and definitions . 10
3.2 Symbols and abbreviated terms . 11
4 Background on PMD properties . 12
5 Measurement methods . 13
5.1 Methods of measuring PMD . 13
5.1.1 General . 13
5.1.2 Method A: Fixed analyzer with Fourier transformation (FA-FT) . 14
5.1.3 Method B: Stokes parameters evaluation (SPE) . 14
5.1.4 Method C: Interferometric . 15
5.1.5 Method D: Stokes parameter evaluation using back-reflected light . 15
5.1.6 Method E: Modulated phase-shift technique . 15
5.1.7 Method F: Polarization phase shift (PPS) . 15
5.1.8 Method G: Wavelength scanning OTDR and SOP Analysis (WSOSA) . 16
5.2 Document structure . 16
5.3 Reference test method . 16
6 Measurement configurations . 16
6.1 Passive cabling link . 16
6.2 Link including amplifiers . 17
6.3 Link including chromatic dispersion compensating modules . 17
6.3.1 General . 17
6.3.2 Grating based DCM . 17
6.4 Link including ROADMs . 17
6.4.1 General . 17
6.4.2 Multi-channel point to point configuration . 18
6.4.3 Single channel configuration . 18
7 Measurement considerations . 18
7.1 General . 18
7.2 Wavelength range . 18
7.3 PMD measurement range. 18
7.4 Measurement dynamic range . 19
7.5 Fibre movement . 19
7.6 Input and output SOP scrambling . 19
7.6.1 General . 19
7.6.2 Polarizers/scramblers . 19
7.6.3 The 9-states Mueller set . 20
7.6.4 Random scrambling . 20
7.7 Polarization dependent loss . 20
7.8 Amplifier considerations . 20
7.8.1 General . 20
7.8.2 Optical isolators . 20
7.8.3 Wavelength range . 20

7.8.4 Power levels . 20
7.8.5 Amplified spontaneous emission (ASE) noise . 20
7.9 Considerations on location of equipment . 21
8 Apparatus . 21
8.1 General . 21
8.2 Light source and polarizers . 21
8.3 Input optics . 22
8.4 Cladding mode stripper . 22
8.5 High-order mode filter . 22
8.6 Output connection . 22
8.7 Output optics . 22
8.8 Detector . 23
8.9 Computer or test platform . 23
8.10 Means to reduce the effects of amplified spontaneous emission . 23
9 Sampling and specimens . 23
10 Procedure . 23
11 Calculation or interpretation of results . 24
12 Documentation . 24
12.1 Information required for each measurement . 24
12.2 Information to be available . 24
13 Specification information . 25
(normative) Fixed analyzer method . 26
A.1 Apparatus . 26
A.1.1 Block diagrams .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.