IEC 60393-1:2008
(Main)Potentiometers for use in electronic equipment - Part 1: Generic specification
Potentiometers for use in electronic equipment - Part 1: Generic specification
IEC 60393-1:2008 is applicable to all types of resistive potentiometers, including lead- screw actuated types, presets, multi-turn units, etc., to be used in electronic equipment. It establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications of electronic components for quality assessment or any other purpose. It has been mainly written, and the test methods described, to conform to the widely used single-turn rotary potentiometer with an operating shaft. This edition contains the following significant technical changes with respect to the previous edition: implementation of Annex H which replaces Section 3 of the previous edition. It also includes minor revisions related to tables, figures and references.
Potentiomètres utilisés dans les équipements électroniques - Partie 1: Spécification générique
L'IEC 60393-1:2008 est applicable à tous les types de potentiomètres résistifs, y compris les potentiomètres à commande par vis, les potentiomètres d'ajustement, les potentiomètres multitours, etc., utilisés dans les équipements électroniques. Elle définit les termes normalisés et établit des procédures de contrôle et des méthodes d'essai normalisées à utiliser dans les spécifications intermédiaires et particulières de composants électroniques pour l'assurance de la qualité ou à toute autre fin. Elle a été principalement rédigée, et les méthodes d'essai ont été décrites, pour être en conformité avec les potentiomètres rotatifs monotour avec axe de commande, qui sont largement répandus. Cette édition comporte les modifications techniques significatives suivantes par rapport à la précédente édition: mise en oeuvre de l'Annexe H, qui remplace la section 3 de la précédente édition.
General Information
Buy Standard
Standards Content (Sample)
IEC 60393-1
Edition 3.0 2008-05
INTERNATIONAL
STANDARD
Potentiometers for use in electronic equipment –
Part 1: Generic specification
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 60393-1
Edition 3.0 2008-05
INTERNATIONAL
STANDARD
Potentiometers for use in electronic equipment –
Part 1: Generic specification
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XD
ICS 31.040.20 ISBN 2-8318-9748-3
– 2 – 60393-1 © IEC:2008(E)
CONTENTS
FOREWORD.6
1 General .8
1.1 Scope.8
1.2 Normative references .8
2 Technical data.10
2.1 Units and symbols .10
2.2 Terms and definitions .10
2.3 Preferred values.28
2.4 Marking .28
3 Assessment procedures .28
4 Test and measurement procedures.28
4.1 General .28
4.2 Standard atmospheric conditions.29
4.3 Drying .30
4.4 Visual examination and check of dimensions.30
4.5 Continuity (except for continuously rotating potentiometers) .32
4.6 Element resistance.32
4.7 Terminal resistance .33
4.8 Maximum attenuation .33
4.9 Resistance law (conformity) .33
4.10 Matching of the resistance law (for ganged potentiometers only) .34
4.11 Switch contact resistance (when appropriate).34
4.12 Voltage proof (insulated styles only).38
4.13 Insulation resistance (insulated styles only).39
4.14 Variation of resistance with temperature.40
4.15 Rotational noise .42
4.16 Contact resistance at low-voltage levels .44
4.17 Setting ability (adjustability) and setting stability.45
4.18 Starting torque .49
4.19 Switch torque .49
4.20 End stop torque.50
4.21 Locking torque.50
4.22 Thrust and pull on shaft.51
4.23 Shaft run-out .52
4.24 Lateral run-out.53
4.25 Pilot (or spigot) diameter run-out .53
4.26 Shaft end play .54
4.27 Backlash .55
4.28 Dither .57
4.29 Output smoothness .58
4.30 Robustness of terminals .59
4.31 Sealing.60
4.32 Solderability .61
4.33 Resistance to soldering heat .61
4.34 Change of temperature.62
60393-1 © IEC:2008(E) – 3 –
4.35 Vibration.63
4.36 Bump .64
4.37 Shock.64
4.38 Climatic sequence .65
4.39 Damp heat, steady state.67
4.40 Mechanical endurance (potentiometers) .68
4.41 AC endurance testing of mains switches on capacitive loads.71
4.42 DC endurance testing of switches .73
4.43 Electrical endurance.74
4.44 Component solvent resistance.78
4.45 Solvent resistance of the marking.78
4.46 Microlinearity.79
4.47 Mounting (for surface mount potentiometers).81
4.48 Shear (adhesion) test .83
4.49 Substrate bending test (formerly bond strength of the end face plating).83
4.50 Solderability (for surface mount potentiometers).83
4.51 Resistance to soldering heat (for surface mount potentiometers).83
Annex A (normative) Rules for the preparation of detail specifications for capacitors
and resistors for electronic equipment .84
Annex B (normative) Interpretation of sampling plans and procedures as described in
IEC 60410 for use within the IEC Quality Assessment System for Electronic
Components .85
Annex C (normative) Measuring methods for rotational noise.86
Annex D (normative) Apparatus for measuring mechanical accuracy .89
Annex E (normative) Measuring method for microlinearity.90
Annex F (normative) Preferred dimensions of shaft ends, bushes and for the mounting
hole, bush-mounted, shaft-operated electronic components .92
Annex G (informative) Example of common potentiometer’s law .93
Annex H (normative) Quality assessment procedures .95
Figure 1 – Shaft-sealed potentiometer .14
Figure 2 – Shaft- and panel-sealed potentiometer.14
Figure 3 – Fully sealed potentiometer .14
Figure 4 – Linear law .16
Figure 5 – Logarithmic law.16
Figure 6 – Inverse logarithmic law.16
Figure 7 – Output ratio.17
Figure 8 – Loading error .18
Figure 9 – Total mechanical travel (or angle of rotation) .18
Figure 10 – Conformity .20
Figure 11 – Absolute conformity.20
Figure 12 – Linearity.21
Figure 13 – Independent linearity.22
Figure 14 – Zero-based linearity .23
Figure 15 – Absolute linearity .24
– 4 – 60393-1 © IEC:2008(E)
Figure 16 – Terminal based linearity .25
Figure 17 – Effective tap width.25
Figure 18 – Backlash .27
Figure 19 – Example of insulation resistance and voltage proof test jig for surface
mount potentiometers .39
Figure 20 – Test circuit contact resistance .45
Figure 21 – Measuring circuit for setting ability (as divider).46
Figure 22 – Measuring circuit for setting ability (as current controller).47
Figure 23 – Shaft run-out .52
Figure 24 – Lateral run-out .53
Figure 25 – Pilot (spigot) diameter run-out .
...
IEC 60393-1 ®
Edition 3.0 2008-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Potentiometers for use in electronic equipment –
Part 1: Generic specification
Potentiomètres utilisés dans les équipements électroniques –
Partie 1: Spécification générique
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 15 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.
IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and
CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient 20 000 termes et définitions en anglais
Spécifications techniques, Rapports techniques et autres
et en français, ainsi que les termes équivalents dans 15
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.
Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
La recherche avancée permet de trouver des publications IEC 65 000 entrées terminologiques électrotechniques, en anglais
en utilisant différents critères (numéro de référence, texte, et en français, extraites des articles Termes et Définitions des
comité d’études,…). Elle donne aussi des informations sur les publications IEC parues depuis 2002. Plus certaines entrées
projets et les publications remplacées ou retirées. antérieures extraites des publications des CE 37, 77, 86 et
CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
csc@iec.ch.
IEC 60393-1 ®
Edition 3.0 2008-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Potentiometers for use in electronic equipment –
Part 1: Generic specification
Potentiomètres utilisés dans les équipements électroniques –
Partie 1: Spécification générique
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.040.20 ISBN 978-2-8322-3379-5
– 2 – IEC 60393-1:2008 IEC 2008
CONTENTS
FOREWORD. 6
1 General . 8
1.1 Scope. 8
1.2 Normative references . 8
2 Technical data . 10
2.1 Units and symbols . 10
2.2 Terms and definitions . 10
2.3 Preferred values . 28
2.4 Marking . 28
3 Assessment procedures . 28
4 Test and measurement procedures . 28
4.1 General . 28
4.2 Standard atmospheric conditions . 29
4.3 Drying . 30
4.4 Visual examination and check of dimensions . 30
4.5 Continuity (except for continuously rotating potentiometers) . 32
4.6 Element resistance . 32
4.7 Terminal resistance . 33
4.8 Maximum attenuation . 33
4.9 Resistance law (conformity) . 33
4.10 Matching of the resistance law (for ganged potentiometers only). 34
4.11 Switch contact resistance (when appropriate) . 34
4.12 Voltage proof (insulated styles only) . 38
4.13 Insulation resistance (insulated styles only) . 39
4.14 Variation of resistance with temperature . 40
4.15 Rotational noise. 42
4.16 Contact resistance at low-voltage levels . 44
4.17 Setting ability (adjustability) and setting stability . 45
4.18 Starting torque . 49
4.19 Switch torque . 49
4.20 End stop torque . 50
4.21 Locking torque . 50
4.22 Thrust and pull on shaft . 51
4.23 Shaft run-out . 52
4.24 Lateral run-out . 53
4.25 Pilot (or spigot) diameter run-out . 53
4.26 Shaft end play . 54
4.27 Backlash . 55
4.28 Dither . 57
4.29 Output smoothness . 58
4.30 Robustness of terminals . 59
4.31 Sealing . 60
4.32 Solderability . 61
4.33 Resistance to soldering heat . 61
4.34 Change of temperature . 62
4.35 Vibration. 63
4.36 Bump . 64
4.37 Shock . 64
4.38 Climatic sequence . 65
4.39 Damp heat, steady state . 67
4.40 Mechanical endurance (potentiometers) . 68
4.41 AC endurance testing of mains switches on capacitive loads . 71
4.42 DC endurance testing of switches . 73
4.43 Electrical endurance . 74
4.44 Component solvent resistance . 78
4.45 Solvent resistance of the marking . 78
4.46 Microlinearity . 79
4.47 Mounting (for surface mount potentiometers) . 81
4.48 Shear (adhesion) test . 83
4.49 Substrate bending test (formerly bond strength of the end face plating) . 83
4.50 Solderability (for surface mount potentiometers) . 83
4.51 Resistance to soldering heat (for surface mount potentiometers) . 83
Annex A (normative) Rules for the preparation of detail specifications for capacitors
and resistors for electronic equipment . 84
Annex B (normative) Interpretation of sampling plans and procedures as described in
IEC 60410 for use within the IEC Quality Assessment System for Electronic
Components . 85
Annex C (normative) Measuring methods for rotational noise . 86
Annex D (normative) Apparatus for measuring mechanical a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.