Subsea equipment - Part 1: Power connectors, penetrators and jumper assemblies with rated voltage from 3 kV (U<sub>max</sub> = 3,6 kV) to 30 kV (U<sub>max</sub> = 36 kV)

IEC/IEEE 61886-1:2021 is applicable to single and three-phase wet-mateable and dry-mateable AC connectors, penetrators and jumper assemblies with rated voltages from 3 kV (Umax = 3,6 kV) to 30 kV (Umax = 36 kV). This document relates to the requirements and tests for products in the "as manufactured and supplied" condition. This document is not applicable to requirements and tests for products that have been subsequently installed, deployed or retrieved.

General Information

Status
Published
Publication Date
19-Apr-2021
Current Stage
PPUB - Publication issued
Completion Date
20-Apr-2021
Ref Project

Buy Standard

Standard
IEC/IEEE 61886-1:2021 - Subsea equipment - Part 1: Power connectors, penetrators and jumper assemblies with rated voltage from 3 kV (U<sub>max</sub> = 3,6 kV) to 30 kV (U<sub>max</sub> = 36 kV)
English language
96 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC/IEEE 61886-1 ®
Edition 1.0 2021-04
INTERNATIONAL
STANDARD
colour
inside
Subsea equipment –
Part 1: Power connectors, penetrators and jumper assemblies with rated voltage
from 3 kV (U = 3,6 kV) to 30 kV (U = 36 kV)
max max
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or
by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing being
secured. Requests for permission to reproduce should be addressed to either IEC at the address below or IEC’s
member National Committee in the country of the requester or from IEEE.

IEC Central Office Institute of Electrical and Electronics Engineers, Inc.
3, rue de Varembé 3 Park Avenue
CH-1211 Geneva 20 New York, NY 10016-5997
Switzerland United States of America
Tel.: +41 22 919 02 11 stds.ipr@ieee.org
info@iec.ch www.ieee.org
www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About the IEEE
IEEE is the world’s largest professional association dedicated to advancing technological innovation and excellence for the
benefit of humanity. IEEE and its members inspire a global community through its highly cited publications, conferences,
technology standards, and professional and educational activities.

About IEC/IEEE publications
The technical content of IEC/IEEE publications is kept under constant review by the IEC and IEEE. Please make sure that
you have the latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 18 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc

If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: sales@iec.ch.
IEC/IEEE 61886-1 ®
Edition 1.0 2021-04
INTERNATIONAL
STANDARD
colour
inside
Subsea equipment –
Part 1: Power connectors, penetrators and jumper assemblies with rated

voltage from 3 kV (Umax = 3,6 kV) to 30 kV (Umax = 36 kV)

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 47.020.60 ISBN 978-2-8322-9623-3

– 2 – IEC/IEEE 61886-1:2021 © IEC/IEEE 2021
CONTENTS
FOREWORD . 10
INTRODUCTION . 12
1 Scope . 13
2 Normative references . 13
3 Terms, definitions and abbreviated terms . 14
3.1 Terms and definitions . 15
3.2 Abbreviated terms . 19
4 Documentation and marking . 20
4.1 Design documentation . 20
4.2 Type test documentation . 20
4.3 Routine test documentation . 20
4.4 As built documentation . 21
4.5 Design analysis. 21
4.6 Data sheet . 21
4.7 Equipment marking . 22
4.7.1 Connectors and penetrators . 22
4.7.2 Jumper assemblies . 22
5 Design . 22
5.1 General design requirements . 22
5.2 Temperature class . 23
5.3 Electrical design requirements . 23
5.3.1 Ratings . 23
5.3.2 Earthing . 24
5.3.3 Dummy connectors . 24
5.4 Mechanical design requirements . 25
5.4.1 Pressure classes . 25
5.4.2 Rapid gas decompression . 25
5.4.3 External forces . 25
5.5 Material requirements . 25
5.5.1 General material requirements . 25
5.5.2 Material certification requirements . 26
5.6 Connector specific requirements . 26
5.6.1 General requirements . 26
5.6.2 Wet mateable connectors . 26
5.6.3 Dry mateable connectors . 27
5.7 Penetrator specific requirements . 27
5.7.1 Penetrators for pressure compensated equipment . 27
5.7.2 Penetrators for pressure retaining equipment . 27
5.8 Seals . 28
5.8.1 General seal requirements . 28
5.8.2 Water seals . 28
5.8.3 Additional requirements for pressure integrity seals . 28
5.9 Electric field control . 28
5.10 Jumper assemblies . 29
5.11 Storage and transportation . 29
6 Tests . 29

6.1 Structure of test clauses . 29
6.2 General test requirements . 29
6.3 Artificial sea water . 30
6.4 Test media . 30
7 Routine tests – Connectors and penetrators . 33
8 Routine tests – Dummy and test connectors . 34
9 Routine tests – Jumper assemblies . 34
10 Sample tests – Hoses . 35
11 Type and special tests – Connectors and penetrators . 35
11.1 Order of tests and type test requirements . 35
11.2 Type tests – Dummy and test connectors . 38
11.3 Type tests – New interface cable . 38
11.4 Prototype manufacturing acceptance test . 39
11.4.1 Objective . 39
11.4.2 Sequence . 39
11.4.3 Acceptance criteria . 39
11.5 Electrical and thermal tests . 40
11.5.1 Objective . 40
11.5.2 Sequence . 40
11.5.3 Acceptance criteria . 41
11.6 Electrical short circuit test . 42
11.6.1 Objective . 42
11.6.2 Sequence . 42
11.6.3 Acceptance criteria . 42
11.7 Hyperbaric test . 42
11.7.1 Objective . 42
11.7.2 Sequence . 42
11.7.3 Acceptance criteria . 44
11.8 Pressure cycling test – Penetrators . 44
11.8.1 Objective . 44
11.8.2 Sequence . 44
11.8.3 Acceptance criteria . 45
11.9 Combined pressure and temperature cycling test – Penetrators . 45
11.9.1 Objective . 45
11.9.2 Sequence . 45
11.9.3 Acceptance criteria . 46
11.10 Rapid gas decompression test . 46
11.10.1 Objective . 46
11.10.2 Sequence . 46
11.10.3 Acceptance criteria . 47
11.11 Mechanical and environmental stress test . 47
11.11.1 Objective . 47
11.11.2 Sequence . 47
11.11.3 Acceptance criteria . 48
11.12 Endurance test – Connectors . 48
11.12.1 Objective .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.