IEC 60286-3:2013

IEC 60286-3 ®
Edition 5.0 2013-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Packaging of components for automatic handling –
Part 3: Packaging of surface mount components on continuous tapes

Emballage de composants pour opérations automatisées –
Partie 3: Emballage des composants pour montage en surface en bandes
continues
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,

please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les

microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.

Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette

publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.

A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.

Liens utiles:
Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: csc@iec.ch.
IEC 60286-3 ®
Edition 5.0 2013-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Packaging of components for automatic handling –

Part 3: Packaging of surface mount components on continuous tapes

Emballage de composants pour opérations automatisées –

Partie 3: Emballage des composants pour montage en surface en bandes

continues
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX W
ICS 31.020; 31.240 ISBN 978-2-83220-819-9

– 2 – 60286-3 © IEC:2013
CONTENTS
FOREWORD . 5

INTRODUCTION . 7

1 General . 8

1.1 Scope . 8

1.2 Normative references . 8

2 Terms and definitions . 8

3 Structure of the specification . 10

4 Dimensional requirements for taping. 10
4.1 Component cavity positioning requirements . 10
4.1.1 Requirements for types 1a, 1b, 2a, 2b and 3. 10
4.1.2 Requirements for types 4 . 10
4.2 Component cavity dimension requirements (tape types 1a, 1b, 2a, 2b and 3) . 11
4.3 Type 1a – Punched carrier tape, with top and bottom cover tape (tape widths:
8 mm and 12 mm) . 12
4.4 Type 1b – Pressed carrier tape, with top cover tape (tape width: 8 mm) . 14
4.5 Type2a – Blister carrier tape, with single round sprocket holes and tape
pitches down to 2 mm (tape widths: 8 mm, 12 mm, 16 mm and 24 mm) . 16
4.6 Type 2b – Blister carrier tape, with single round sprocket holes and with

1mm tape pitch (tape widths: 4 mm) . 18
4.7 Type 3 – Blister carrier tape, with double sprocket holes (32 mm to 200 mm) . 20
4.8 Type 4 – Adhesive-backed punched plastic carrier tape for singulated bare
die and other surface mount components (8 mm, 12 mm, 16 mm and 24 mm) . 22
5 Polarity and orientation requirements of components in the tape . 25
5.1 Requirements for all tape types . 25
5.2 Specific requirements for type 1a . 25
5.3 Specific requirements for type 4 . 25
6 Carrier tape requirements . 25
6.1 Taping materials . 25
6.2 Minimum bending radius (for all types) . 26
6.3 Camber . 26
7 Cover tape requirements (for type 1a, 1b, 2a, 2b and 3) . 27
8 Component taping and additional tape requirements . 28

8.1 All types . 28
8.2 Specific requirements for type 1b . 28
8.3 Specific tape requirements for type 2b. 28
8.4 Specific requirement for type 4 . 28
8.4.1 General . 28
8.4.2 Coordinate system . 29
8.4.3 Component positioning and lateral displacement (see Figures 19 and 23) . 30
8.5 Specific requirements for tapes containing die products . 31
8.5.1 General . 31
8.5.2 Tape design for tapes containing die products . 31
8.5.3 Cleanliness . 31
8.5.4 Die lateral movement (Types 1a, 2a and 2b) . 32
9 Reel requirements . 32
9.1.1 General . 32

60286-3 © IEC:2013 – 3 –
9.1.2 Reel dimensions related to tape (see Figure 24 and Table 23) . 32

9.1.3 Reel hole dimensions (see Figure 25 and Table 24) . 34

9.2 Marking . 34

10 Tape reeling requirements . 35

10.1 All types . 35

10.2 Specific requirements for type 1a . 35

10.3 Specific requirements for type 4 . 35

10.4 Leader and trailer tape (see Figure 27) . 36

10.4.1 Leader . 36

10.4.2 Trailer . 36
10.5 Recycling . 36
10.6 Missing components . 36
Annex A (normative) Recommended measuring methods for type 1b . 37
Bibliography . 39

Figure 1 – Sectional view of component cavity (type 1b) . 9
Figure 2 – 8 mm and 12 mm punched carrier-tape dimensions (4 mm cavity pitch) . 12
Figure 3 – Illustration of 2 mm and 1 mm cavity pitch and maximum pocket offset . 12
Figure 4 – Maximum component tilt, rotation and lateral movement . 12
Figure 5 – Dimensions (P = 4 mm/P = 2 mm) and (P = 4 mm/P = 1 mm) . 14
0 1 0 1
Figure 6 – Illustration of 2 mm and 1 mm cavity pitch and maximum pocket offset . 14
Figure 7 – Maximum component tilt, rotation and lateral movement . 14
Figure 8 – Blister carrier tape dimensions (8 mm, 12 mm, 16 mm and 24 mm) . 16
Figure 9 – Illustration of 2 mm cavity pitch and pocket offset . 16
Figure 10 – Maximum component tilt, rotation and lateral movement . 16
Figure 11 – Type 2b carrier tape . 18
Figure 12 – Maximum pocket offset . 18
Figure 13 – Maximum component tilt, rotation and lateral movement . 18
Figure 14 – Blister carrier tape . 20
Figure 15 – Elongated sprocket hole skew . 20
Figure 16 – Maximum component tilt, rotation and lateral movement . 20
Figure 17 – Adhesive-backed punched carrier-tape dimensions (4 mm compartment
pitch) . 23
Figure 18 – Illustration of 2 mm compartment pitch . 23
Figure 19 – Maximum
...