IEC TS 62282-9-101:2020

IEC TS 62282-9-101 ®
Edition 1.0 2020-10
TECHNICAL
SPECIFICATION
colour
inside
Fuel cell technologies –
Part 9-101: Evaluation methodology for the environmental performance of fuel
cell power systems based on life cycle thinking – Streamlined life-cycle
considered environmental performance characterization of stationary fuel cell
combined heat and power systems for residential applications

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.

need further assistance, please contact the Customer Service

Centre: sales@iec.ch.
IEC TS 62282-9-101 ®
Edition 1.0 2020-10
TECHNICAL
SPECIFICATION
colour
inside
Fuel cell technologies –
Part 9-101: Evaluation methodology for the environmental performance of fuel

cell power systems based on life cycle thinking – Streamlined life-cycle

considered environmental performance characterization of stationary fuel cell

combined heat and power systems for residential applications

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 27.070 ISBN 978-2-8322-8927-3

– 2 – IEC TS 62282-9-101:2020 © IEC:2020
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Framework for evaluation process . 9
4.1 General . 9
4.2 Life cycle stages . 9
4.3 Functional unit . 9
4.4 Product system . 10
4.5 Inputs, outputs and related environmental impact categories . 10
4.6 Types and quality of data, and information sources . 11
5 Estimation methods . 11
5.1 General remarks on life cycle impact assessment (LCIA) . 11
5.2 Global warming in the use stage . 12
5.2.1 Required data . 12
5.2.2 Input data . 12
5.2.3 Determination of necessary parameter values . 13
5.2.4 Calculation . 14
5.3 Abiotic resource depletion potential (ADP) . 15
5.3.1 General . 15
5.3.2 Calculation of the total ADP . 16
6 Communication and verification . 16
6.1 General . 16
6.2 Communication . 16
6.2.1 General . 16
6.2.2 Communication relating to a fuel cell power system alone . 17
6.2.3 Communication relating to a fuel cell power system with a
supplementary heat generator and thermal storage . 18
6.2.4 Verification . 19
Annex A (informative) Reference demands by region for electric power and heat . 20
Bibliography . 21

Figure 1 – Life cycle stages (prioritized stages in solid-lined boxes) . 9
Figure 2 – Configuration of a fuel cell power system that can be complemented with a
supplementary heat generator or thermal storage system covered by this document . 10
Figure 3 – System boundaries, elementary flows and environmental impact categories
assessed in this document . 11
Figure 4 – Communication relating to a fuel cell power system . 18
Figure 5 – Communication relating to a fuel cell power system with a supplementary
heat generator and thermal storage system . 19
Figure A.1 – Example of electricity demand and heat (hot water) demand,
distinguishing between electricity import from the grid and electricity export to the grid . 20

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FUEL CELL TECHNOLOGIES –
Part 9-101: Evaluation methodology for the environmental performance of
fuel cell power systems based on life cycle thinking –
Streamlined life-cycle considered environmental performance
characterization of stationary fuel cell combined heat and power systems
for residential applications
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. In exceptional
circumstances, a technical committee may propose the publication of a Technical Specification
when
• the required support cannot be obtained for the publication of an International Standard,
despite repeated efforts, or
• the subject is still under technical development or where, for any other reason, there is the
future but no immediate possibility of an agreement on an International Standard.
Technical Specifications are subject to review within three years of publication to decide
whether they can be transformed into International Standards.
IEC TS 62282-9-101, which is a Technical Specification, has been prepared by IEC technical
committee 105: Fuel cell technologies.

– 4 – IEC TS 62282-9-101:2020 © IEC:2020
The text of this Technical Specification is based on the following documents:
Draft TS Report on voting
105/787/DTS 105/799A/RVDTS
Full information on the voting for the approval of this Technical Specification can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 62282 series, published under the general title Fuel cell technologies,
can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct understanding
of its contents. Users should therefore print this document using a colour printer.

INTRODUCTION
This part of IEC 62282 introduces a simplified evaluation method for assessing the life-cycle
considered environmental performance of stationary fuel cell power systems for residential
applications that can be complemented with a supplementary heat generator or a thermal
storage system.
As a response to the aggravation of global environmental issues in recent years, corporate
environmental management is increasingly required in order to enhance the environmental
performance of products and c
...