IEC 62282-8-301:2023
(Main)Fuel cell technologies - Part 8-301: Energy storage systems using fuel cell modules in reverse mode - Power-to-methane energy systems based on solid oxide cells including reversible operation - Performance test methods
Fuel cell technologies - Part 8-301: Energy storage systems using fuel cell modules in reverse mode - Power-to-methane energy systems based on solid oxide cells including reversible operation - Performance test methods
IEC 62282-8-301:2023 specifies performance test methods of power-to-methane systems based on solid oxide cells (SOCs). Water, CO2, and electricity are supplied to the system to produce methane and oxygen.
This document is not intended to be applied to solid oxide fuel cell (SOFC) cell/stack assembly units for power generation purposes only, since these are covered in IEC 62282-7-2. In addition, the test methods for SOC cell/stack assembly units including reversible operation (without any methanation reactor) are already described in IEC 62282-8-101.
This document is intended to be used for data exchanges in commercial transactions between the system manufacturers and customers. Users of this document can selectively execute test items suitable for their purposes from those described in this document.
Technologies des piles à combustible - Partie 8-301: Systèmes de stockage de l’énergie utilisant des modules à piles à combustible en mode inversé - Systèmes de conversion de l’énergie en méthane à base de piles à oxyde solide, comprenant le fonctionnement réversible - Méthodes d’essai des performances
IEC 62282-8-31:2023 spécifie les méthodes d’essai de performance des systèmes de conversion d’électricité en méthane à base de piles à oxyde solide (SOC). De l’eau, du CO2 et de l’électricité sont fournis au système pour produire du méthane et de l’oxygène.
IEC 62282 spécifie les méthodes d’essai de performance des systèmes de conversion d’électricité en méthane à base de piles à oxyde solide (SOC). De l’eau, du CO2 et de l’électricité sont fournis au système pour produire du méthane et de l’oxygène.
Le présent document est destiné à être utilisé pour les échanges de données dans le cadre de transactions commerciales entre les fabricants de systèmes et les clients. Les utilisateurs du présent document peuvent choisir les éléments d’essai à exécuter selon leurs objectifs parmi ceux décrits dans le présent document.
General Information
Buy Standard
Standards Content (Sample)
IEC 62282-8-301 ®
Edition 1.0 2023-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fuel cell technologies –
Part 8-301: Energy storage systems using fuel cell modules in reverse mode –
Power-to-methane energy systems based on solid oxide cells including
reversible operation – Performance test methods
Technologies des piles à combustible –
Partie 8-301: Systèmes de stockage de l’énergie utilisant des modules à piles à
combustible en mode inversé – Systèmes de conversion de l’énergie en
méthane à base de piles à oxyde solide, comprenant le fonctionnement
réversible – Méthodes d’essai des performances
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 19 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Recherche de publications IEC - IEC Products & Services Portal - products.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications. Avec un
en utilisant différents critères (numéro de référence, texte, abonnement, vous aurez toujours accès à un contenu à jour
comité d’études, …). Elle donne aussi des informations sur les adapté à vos besoins.
projets et les publications remplacées ou retirées.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au monde,
Restez informé sur les nouvelles publications IEC. Just
avec plus de 22 300 articles terminologiques en anglais et en
Published détaille les nouvelles publications parues.
français, ainsi que les termes équivalents dans 19 langues
Disponible en ligne et une fois par mois par email.
additionnelles. Egalement appelé Vocabulaire
Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 62282-8-301 ®
Edition 1.0 2023-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fuel cell technologies –
Part 8-301: Energy storage systems using fuel cell modules in reverse mode –
Power-to-methane energy systems based on solid oxide cells including
reversible operation – Performance test methods
Technologies des piles à combustible –
Partie 8-301: Systèmes de stockage de l’énergie utilisant des modules à piles à
combustible en mode inversé – Systèmes de conversion de l’énergie en
méthane à base de piles à oxyde solide, comprenant le fonctionnement
réversible – Méthodes d’essai des performances
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 27.070 ISBN 978-2-8322-6860-5
– 2 – IEC 62282-8-301:2023 © IEC 2023
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 7
3 Terms, definitions, abbreviated terms and symbols . 8
3.1 Terms and definitions . 8
3.2 Abbreviated terms and symbols . 13
3.2.1 Abbreviated terms . 13
3.2.2 Symbols . 13
4 Power-to-methane system based on SOC . 18
5 Reference conditions . 19
5.1 Temperature and pressure . 19
5.2 Heating value base . 19
6 Instrumentation and measurement methods. 19
6.1 General . 19
6.2 Instrument uncertainty . 20
6.3 Measurement methods . 21
6.3.1 Measurement methods for testing the power-to-methane energy system . 21
6.3.2 Measurement methods for testing components . 24
7 Test methods and procedures. 27
7.1 General . 27
7.2 System performance tests . 27
7.2.1 Start-up test. 27
7.2.2 Performance tests at rated operation . 28
7.2.3 Performance test at power input variation . 32
7.2.4 Shutdown test . 33
7.3 Performance test for components. 33
7.3.1 SOC cell/stack assembly unit . 33
7.3.2 Methanation reactor . 42
8 Test report . 45
8.1 General . 45
8.2 Title page . 45
8.3 Table of contents . 45
8.4 Summary report . 46
Annex A (informative) Guidelines for the contents of detailed and full reports . 47
A.1 General . 47
A.2 Detailed report . 47
A.3 Full report . 47
Bibliography . 48
Figure 1 – Process schematic of the scope of IEC 62282-8-301 . 7
Figure 2 – Schematic of the physical interfaces of the system . 20
Figure 3 – Testing system . 34
Figure 4 – Test environment and interfaces between SOC cell/stack, methanation
reactor and experimental set-up . 36
Table 1 – Symbols . 13
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FUEL CELL TECHNOLOGIES –
Part 8-301: Energy storage systems using fuel cell modules in reverse
mode – Power-to-methane energy systems based on solid oxide cells
including reversible operation – Performance test methods
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.