iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 60282-2:1995/AMD1:1997

(Amendment)

Amendment 1 - High-voltage fuses - Part 2: Expulsion fuses

Amendment 1 - High-voltage fuses - Part 2: Expulsion fuses

Amendement 1 - Fusibles à haute tension - Partie 2: Coupe-circuit à expulsion

General Information

Status
Published
Publication Date
25-Aug-1997
ICS
29.120.50 - Fuses and other overcurrent protection devices
Technical Committee
SC 32A - High-voltage fuses
Current Stage
DELPUB - Deleted Publication
Completion Date
29-Apr-2008
Ref Project

Relations

Amends
IEC 60282-2:1995 - High-voltage fuses - Part 2: Expulsion fuses
Effective Date
05-Sep-2023
Revised
IEC 60282-2:2008 - High-voltage fuses - Part 2: Expulsion fuses
Effective Date
05-Sep-2023

Buy Standard

IEC 60282-2:1995/AMD1:1997 - Amendment 1 - High-voltage fuses - Part 2: Expulsion fuses Released:8/26/1997 Isbn:2831839521IEC 60282-2:1995/AMD1:1997 - Amendment 1 - High-voltage fuses - Part 2: Expulsion fuses Released:8/26/1997 Isbn:2831839521
PreviousNext
Standard
IEC 60282-2:1995/AMD1:1997 - Amendment 1 - High-voltage fuses - Part 2: Expulsion fuses Released:8/26/1997 Isbn:2831839521
English and French language
3 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


NORME
CEI
INTERNATIONALE
IEC
60282-2
INTERNATIONAL
STANDARD
AMENDEMENT 1
AMENDMENT 1
1997-08
Amendement 1
Fusibles à haute tension –
Partie 2:
Coupe-circuit à expulsion
Amendment 1
High-voltage fuses –
Part 2:
Expulsion fuses
 IEC 1997 Droits de reproduction réservés  Copyright - all rights reserved
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
PRICE CODE B
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

– 2 – 60282-2 amend. 1 © CEI:1997

AVANT-PROPOS
Le présent amendement a été établi par le sous-comité 32A: Coupe-circuit à fusibles à haute
tension, du comité d'études 32 de la CEI: Coupe-circuit à fusibles.

Le texte de cet amendement est issu des documents suivants:

FDIS Rapport de vote
32A/187/FDIS 32A/190/RVD
Le rapport de vote indiqué dans le tableau ci-dessus donne toute information sur le vote ayant
abouti à l’approbation de cet amendement.
___________
Page 22
7.2 Conditions normalisées de fonctionnement en ce qui concerne le pouvoir de coupure
Ajouter, à la fin du point a), le texte suivant:
Le fabricant de fusibles a la responsabilité d'inclure, dans la documentation et sur l'emballage,
un avertissement de possibilité d'émission de gaz chauds et de particules pendant la fusion du
coupe-circuit.
Page 56
Ajouter le nouveau paragraphe 11.3.6 suivant:
11.3.6 Mise au rebut
Quand cela est applicable,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 60282-4:2020(Main)
High-voltage fuses - Part 4: Additional testing requirements for high-voltage expulsion fuses utilizing polymeric insulators

IEC 60282-4:2020 applies to expulsion fuses complying with IEC 60282-2 and specifies additional testing requirements for fuses employing a cutout fuse-base that utilizes polymeric insulators.

  • Standard
    33 pages
    English and French language
    sale 15% off
IEC
IEC 60282-1:2020(Main)
High-voltage fuses - Part 1: Current-limiting fuses

IEC 60282-1:2020 applies to all types of high-voltage current-limiting fuses designed for use outdoors or indoors on alternating current systems of 50 Hz and 60 Hz and of rated voltages exceeding 1 000 V.
This eighth edition cancels and replaces the seventh edition published in 2009.
This edition includes the following significant technical changes with respect to the previous edition:
– additional information concerning thermally operated strikers;
– the division of ratings, characteristics and type tests into those applicable to all fuses and those applicable to particular fuse-link types and applications;
– adjustment of Series II voltages and tests to meet present North American standard system voltages and applications;
– clarification of requirements for fuse-links used in surrounding temperatures above 40 °C; and
– clarification of homogeneous requirements for fuse-links containing one element.

  • Standard
    167 pages
    English and French language
    sale 15% off
IEC
IEC 60644:2009(Main)
Specification for high-voltage fuse-links for motor circuit applications

IEC 60644:2009 applies primarily to fuse-links used with motors started direct-on-line on alternating current systems of 50 Hz and 60 Hz. Standardizes time-current characteristics to formulate additional pulse withstand requirements regarding testing and to give guidance for the selection of fuse-links to be used with motors. Note: Fuse-links according to this specification should comply with the requirements of IEC 60282-1. The main changes with regard to the previous edition concern the following:
- update of the normative references;
- renewal of the figures.

  • Standard
    25 pages
    English and French language
    sale 15% off
  • Standard
    44 pages
    English and French language
    sale 15% off
IEC
IEC 60644:2009/AMD1:2019(Amendment)
Amendment 1 - Specification for high-voltage fuse-links for motor circuit applications
  • Standard
    5 pages
    English and French language
    sale 15% off
IEC
IEC 60282-1:2009(Main)
High-voltage fuses - Part 1: Current-limiting fuses

IEC 60282-1:2009 applies to all types of high-voltage current-limiting fuses designed for use outdoors or indoors on alternating current systems of 50 Hz and 60 Hz and of rated voltages exceeding 1 000 V. The changes introduced by this new edition are only editorial.

  • Standard
    172 pages
    English and French language
    sale 15% off
  • Standard
    339 pages
    English and French language
    sale 15% off
IEC
IEC 60282-1:2009/AMD1:2014(Amendment)
Amendment 1 - High-voltage fuses - Part 1: Current-limiting fuses
  • Standard
    26 pages
    English and French language
    sale 15% off
IEC
IEC TR 62655:2013(Main)
Tutorial and application guide for high-voltage fuses

IEC/TR 62655:2013 provides information for understanding the construction, operation and application of high-voltage fuses in general. Current-limiting, expulsion, electronic, and other, non-current-limiting, fuses rated above 1 kV a.c. are all covered, as are North American, European and other application practices. As a technical report, this document contains no requirement and is informative only. Key words: high-voltage fuses

  • Technical report
    269 pages
    English and French language
    sale 15% off
IEC
IEC 60549:2013(Main)
High-voltage fuses for the external protection of shunt capacitors

IEC 60549:2013 applies to external fuses used with high-voltage capacitors according to IEC 60871-1, Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General. IEC 60871-1 is applicable to both capacitor units and capacitor banks intended to be used, particularly, for power-factor correction of a.c. power systems, and also to capacitors intended for use in power filter circuits. Fuses according to IEC 60549:2013 are intended to clear either faults inside a capacitor unit to permit continued operation of the remaining parts of the bank in which the unit is connected (unit fuses) or faults on the whole capacitor bank to isolate the bank from the system (line fuses). This second edition cancels and replaces the first edition published in 1976. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- alignment of the document with current IEC document structure requirements;
- clarification of certain test requirements. Keywords: external fuses used with high-voltage capacitors, shunt capacitors for a.c.power system

  • Standard
    32 pages
    English and French language
    sale 15% off
IEC
IEC 60282-2:2008(Main)
High-voltage fuses - Part 2: Expulsion fuses

IEC 60282-2:2008 provides requirements for expulsion fuses designed for use outdoors or indoors on alternating current systems of 50 Hz and 60 Hz, and of rated voltages exceeding 1 000 V. The main changes with regard to the previous edition include:
- Class C has been eliminated;
- TRV values have been reviewed and, where appropriate, harmonized with IEC 62271-100:2001, its amendment 1 (2002) and amendment 2 (2006);
- tests for non-ceramic insulators have been included;
- a lightning surge impulse withstand test for fuse-links has been included; and
- an homogeneous series has been redefined.

  • Standard
    107 pages
    English and French language
    sale 15% off
IEC
IEC 60282-1:2005(Main)
High-voltage fuses - Part 1: Current-limiting fuses

This part of IEC 60282 applies to all types of high-voltage current-limiting fuses designed for use outdoors or indoors on alternating current systems of 50 Hz and 60 Hz and of rated voltages exceeding 1000 V.

  • Standard
    175 pages
    English and French language
    sale 15% off