IEC 61643-331:2017
(Main)Components for low-voltage surge protective devices - Part 331: Performance requirements and test methods for metal oxide varistors (MOV)
Components for low-voltage surge protective devices - Part 331: Performance requirements and test methods for metal oxide varistors (MOV)
IEC 61643-331:2017 is a test specification for metal oxide varistors (MOV), which are used for applications up to 1 000 V AC or 1 500 V DC in power line, or telecommunication, or signalling circuits. They are designed to protect apparatus or personnel, or both, from high transient voltages. This specification applies to MOVs having two electrodes and hybrid overvoltage protection components. This specification also does not apply to mountings and their effect on the MOV’s characteristics. Characteristics given apply solely to the MOV mounted only in the ways described for the tests. This second edition cancels and replaces the first edition published in 2003. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) Update of the nominal varistor voltage test method;
b) Addition of thermally protected varistors – component symbol and test methods;
c) Addition of nominal discharge current – test methods;
d) Addition of voltage ratings for disc types (Table 1);
e) Addition of test currents for clamping voltage of disc types (Table 2);
f) Addition of typical voltage ratings of SMD types (Table 3); and
g) Addition of Limited current and temporary overvoltage tests for thermally protected varistors.
Keywords: metal oxide varistors (MOV), high transient voltages.
Composants pour parafoudres basse tension - Partie 331: Exigences de performances et méthodes d'essai pour varistances à oxyde métallique (VOM)
IEC 61643-331:2017 traite des spécifications d'essais relatifs aux varistances à oxyde métallique (VOM), utilisées pour des applications sur des lignes d'alimentation, de télécommunication ou des circuits de signalisation de 1 000 V CA ou 1 500 V CC au plus. Elles sont conçues pour protéger le matériel, le personnel ou les deux des tensions transitoires élevées. Ces spécifications s'appliquent aux VOM qui disposent de deux électrodes et de composants hybrides de protection contre la surtension. Par ailleurs, ces spécifications ne s'appliquent pas aux supports de fixation et à leur effet sur les caractéristiques des VOM. Les caractéristiques présentées ne s'appliquent qu'aux VOM montées selon les méthodes décrites pour les essais. Cette deuxième édition annule et remplace la première édition parue en 2003. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) mise à jour de la méthode d'essai de tension nominale de varistance;
b) ajout des varistances à protection thermique – symbole de composant et méthodes d'essai;
c) ajout du courant nominal de décharge – méthodes d'essai;
d) ajout de caractéristiques de tensions pour les types à disques (Tableau 1);
e) ajout de courants d'essai pour la tension d'écrêtage des types à disques (Tableau 2);
f) ajout de caractéristiques de tensions typiques des types de CMS (Tableau 3); et
g) ajout d'essais en courants limités et surtensions temporaires pour les varistances à protection thermique.
Mots clés : varistances à oxyde métallique (VOM), tensions transitoires élevées
General Information
Relations
Buy Standard
Standards Content (Sample)
IEC 61643-331 ®
Edition 2.0 2017-12
INTERNATIONAL
STANDARD
colour
inside
Components for low-voltage surge protective devices –
Part 331: Performance requirements and test methods for metal oxide varistors
(MOV)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.
IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and
CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
IEC 61643-331 ®
Edition 2.0 2017-12
INTERNATIONAL
STANDARD
colour
inside
Components for low-voltage surge protective devices –
Part 331: Performance requirements and test methods for metal oxide varistors
(MOV)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 31.040.20 ISBN 978-2-8322-5095-2
– 2 – IEC 61643-331:2017 © IEC 2017
CONTENTS
CONTENTS . 2
FOREWORD . 5
1 Scope . 7
2 Normative references . 7
3 Terms, definitions, symbols and abbreviated terms . 7
3.1 Ratings . 8
3.2 Characteristics . 9
3.3 Symbols . 10
3.4 Abbreviated terms . 11
4 Service conditions . 11
4.1 Operating and storage temperature ranges . 11
4.2 Altitude or atmospheric pressure range . 11
4.3 Relative Humidity . 11
5 Mechanical requirements and materials . 12
5.1 Robustness of terminations . 12
5.2 Solderability . 12
5.3 Marking . 12
6 General . 12
6.1 Failure rates . 12
6.2 Test standard atmospheric conditions . 12
7 Electrical requirements . 12
7.1 Nominal varistor voltage . 12
7.2 Maximum AC (DC) continuous operating voltage. 13
7.3 Standby current I . 13
DC
7.4 Capacitance . 13
7.5 Clamping voltage . 13
7.6 Electrostatic discharge (ESD) (for SMD type MOV only). 15
7.7 Rated impulse energy (W ) . 15
TM
7.8 Nominal discharge current I . 15
n
7.9 Endurance . 15
7.10 Limited current temporary overvoltage . 15
8 Standard design test criteria . 15
8.1 General . 15
8.2 Ratings . 15
8.2.1 Single-impulse maximum current (I ) . 15
TM
8.2.2 Next Impulse . 16
8.2.3 Continuous rated voltage (V ) . 16
M
8.3 Electrical characteristics . 16
8.3.1 Clamping voltage (V ) . 16
C
8.3.2 Standby current (I ) . 17
D
8.3.3 Nominal varistor voltage (V ) . 17
N
8.3.4 Capacitance (C ) . 17
V
8.4 Endurance . 18
8.5 ESD Test Method . 18
9 Nominal discharge current and limited current temporary overvoltage. 18
9.1 Thermally protected varistors – Sequence of tests . 18
9.2 Temperature and humidity cycle conditioning . 18
9.3 Nominal discharge current I(n) test description . 19
9.3.1 General . 19
9.3.2 Pass/fail criteria . 21
9.4 Limited current temporary overvoltage test description and procedure for
thermally protected varistors . 21
9.4.1 General . 21
9.4.2 Sample preparation . 21
9.4.3 Test conditions . 21
9.4.4 Pass/fail criteria . 22
9.5 Dielectric testing . 24
9.5.1 Test conditions . 24
9.5.2 Setup from foil to leads . 24
9.5.3 Pass criteria . 24
Annex A (informative) MOV testing according to IEC 61643-11:2011 – Surge
protective devices for the Class I, II and III . 25
A.1 General . 25
A.2 MOV selection . 25
A.3 Cross reference list of abbreviations, descriptions and definitions . 25
A.4 Operating duty test . 26
A.4.1 General . 26
A.4.2 Measured limiting voltage . 28
A.4.3 Class I and II operating duty tests (8.3.4.3) . 31
A.4.4 Additional duty test for test class I . 31
A.4.5 Class III operating duty tests . 32
A.4.6 Pass criteria for all operating duty tests and for the additional duty test
for test class I . 33
A.4.7 Preferred parameters of impulse discharge current I used for Class I
imp
additional duty tests . 33
A.4.8 Preferred values of impulse discharge current I used for Class I and
n
Class II residual voltage and operating duty tests . 33
A.4.9 Preferred values of combination waveshape used for Class III tests . 34
Annex B (informative) IEC 61051 Varistors for use in electronic equipment . 36
Annex C (informative) Accelerated endurance screening test . 37
C.1 Accelerated endurance screening test . 37
C.2 Preparation of sample . 37
C.3 Test conditions . 37
C.4 Pass criteria . 38
Annex D (informative) Proposed test method for determination of mean time to failure
(MTTF) . 39
D.1 Sampling plans . 39
D.2 Total test hours . 39
D.3 Samples. 39
D.4 Intermediate measurements . 40
D.5 Failure criteria . 40
D.6 Acceptance criteria . 40
Bibliography .
...
IEC 61643-331 ®
Edition 2.0 2017-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Components for low-voltage surge protective devices –
Part 331: Performance requirements and test methods for metal oxide
varistors (MOV)
Composants pour parafoudres basse tension –
Partie 331: Exigences de performances et méthodes d'essai pour varistances
à oxyde métallique (VOM)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and once 67 000 electrotechnical terminology entries in English and
a month by email. French extracted from the Terms and Definitions clause of IEC
publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or need CISPR.
further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Recherche de publications IEC - Le premier dictionnaire d'électrotechnologie en ligne au monde,
webstore.iec.ch/advsearchform avec plus de 22 000 articles terminologiques en anglais et en
La recherche avancée permet de trouver des publications IEC français, ainsi que les termes équivalents dans 16 langues
en utilisant différents critères (numéro de référence, texte, additionnelles. Egalement appelé Vocabulaire
comité d’études,…). Elle donne aussi des informations sur les Electrotechnique International (IEV) en ligne.
projets et les publications remplacées ou retirées.
Glossaire IEC - std.iec.ch/glossary
IEC Just Published - webstore.iec.ch/justpublished 67 000 entrées terminologiques électrotechniques, en anglais
Restez informé sur les nouvelles publications IEC. Just et en français, extraites des articles Termes et Définitions des
Published détaille les nouvelles publications parues. publications IEC parues depuis 2002. Plus certaines entrées
Disponible en ligne et une fois par mois par email. antérieures extraites des publications des CE 37, 77, 86 et
CISPR de l'IEC.
Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
Electropedia - www.electropedia.org
IEC 61643-331 ®
Edition 2.0 2017-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Components for low-voltage surge protective devices –
Part 331: Performance requirements and test methods for metal oxide
varistors (MOV)
Composants pour parafoudres basse tension –
Partie 331: Exigences de performances et méthodes d'essai pour varistances
à oxyde métallique (VOM)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.040.20 ISBN 978-2-8322-6824-7
– 2 – IEC 61643-331:2017 © IEC 2017
CONTENTS
CONTENTS . 2
FOREWORD . 5
1 Scope . 7
2 Normative references . 7
3 Terms, definitions, symbols and abbreviated terms . 7
3.1 Ratings . 8
3.2 Characteristics . 9
3.3 Symbols . 10
3.4 Abbreviated terms . 11
4 Service conditions . 11
4.1 Operating and storage temperature ranges . 11
4.2 Altitude or atmospheric pressure range . 11
4.3 Relative Humidity . 11
5 Mechanical requirements and materials . 12
5.1 Robustness of terminations . 12
5.2 Solderability . 12
5.3 Marking . 12
6 General . 12
6.1 Failure rates . 12
6.2 Test standard atmospheric conditions . 12
7 Electrical requirements . 12
7.1 Nominal varistor voltage . 12
7.2 Maximum AC (DC) continuous operating voltage. 13
7.3 Standby current I . 13
DC
7.4 Capacitance . 13
7.5 Clamping voltage . 13
7.6 Electrostatic discharge (ESD) (for SMD type MOV only). 15
7.7 Rated impulse energy (W ) . 15
TM
7.8 Nominal discharge current I . 15
n
7.9 Endurance . 15
7.10 Limited current temporary overvoltage . 15
8 Standard design test criteria . 15
8.1 General . 15
8.2 Ratings . 15
8.2.1 Single-impulse maximum current (I ) . 15
TM
8.2.2 Next Impulse . 16
8.2.3 Continuous rated voltage (V ) . 16
M
8.3 Electrical characteristics . 16
8.3.1 Clamping voltage (V ) . 16
C
8.3.2 Standby current (I ) . 17
D
8.3.3 Nominal varistor voltage (V ) . 17
N
8.3.4 Capacitance (C ) . 17
V
8.4 Endurance . 18
8.5 ESD Test Method . 18
9 Nominal discharge current and limited current temporary overvoltage. 18
9.1 Thermally protected varistors – Sequence of tests . 18
9.2 Temperature and humidity cycle conditioning . 18
9.3 Nominal discharge current I(n) test description . 19
9.3.1 General . 19
9.3.2 Pass/fail criteria . 21
9.4 Limited current temporary overvoltage test description and procedure for
thermally protected varistors . 21
9.4.1 General . 21
9.4.2 Sample preparation . 21
9.4.3 Test conditions . 21
9.4.4 Pass/fail criteria . 22
9.5 Dielectric testing . 24
9.5.1 Test conditions . 24
9.5.2 Setup from foil to leads . 24
9.5.3 Pass criteria . 24
Annex A (informative) MOV testing according to IEC 61643-11:2011 – Surge
protective devices for the Class I, II and III . 25
A.1 General . 25
A.2 MOV selection . 25
A.3 Cross reference list of abbreviations, descriptions and definitions . 25
A.4 Operating duty test . 26
A.4.1 General . 26
A.4.2 Measured limiting voltage . 28
A.4.3 Class I and II operating duty tests (8.3.4.3) . 31
A.4.4 Additional duty test for test class I .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.