IEC 60245-7:2026

IEC 60245-7 ®
Edition 2.0 2026-03
INTERNATIONAL
STANDARD
Rubber insulated cables - Rated voltages up to and including 450/750 V -
Part 7: Heat resistant ethylene-vinyl acetate rubber insulated cables
ICS 29.060.20  ISBN 978-2-8327-1140-8

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or
by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either
IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC copyright
or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local
IEC member National Committee for further information.

IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - IEC Products & Services Portal - products.iec.ch
webstore.iec.ch/advsearchform Discover our powerful search engine and read freely all the
The advanced search enables to find IEC publications by a
publications previews, graphical symbols and the glossary.
variety of criteria (reference number, text, technical With a subscription you will always have access to up to date
committee, …). It also gives information on projects, content tailored to your needs.
replaced and withdrawn publications.

Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published containing more than 22 500 terminological entries in English
details all new publications released. Available online and and French, with equivalent terms in 25 additional languages.
once a month by email. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer
Service Centre: sales@iec.ch.
CONTENTS
FOREWORD . 2
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Heat resistant ethylene-vinyl acetate rubber or other equivalent synthetic
elastomer insulated, single-core, non-sheathed 750 V cable for a maximum
conductor temperature of 110 °C . 5
4.1 Code designation . 5
4.2 Rated voltage . 5
4.3 Construction. 5
4.3.1 Conductor . 5
4.3.2 Separator . 5
4.3.3 Insulation . 5
4.3.4 Overall diameter . 5
4.3.5 Marking. 6
4.4 Tests . 6
4.5 Guidance on use of the cables . 6
5 Heat resistant ethylene-vinyl acetate rubber or other equivalent synthetic
elastomer insulated, single-core, non-sheathed 500 V cable for a maximum
conductor temperature of 110 °C . 8
5.1 Code designation . 8
5.2 Rated voltage . 8
5.3 Construction. 8
5.3.1 Conductor . 8
5.3.2 Separator . 8
5.3.3 Insulation . 9
5.3.4 Overall diameter . 9
5.3.5 Marking. 9
5.4 Tests . 9
5.5 Guidance on use of the cables . 9
Bibliography . 11

Table 1 – General data for types 60245 IEC 04 and 60245 IEC 05. 7
Table 2 – Tests for types 60245 IEC 04 and 60245 IEC 05 . 8
Table 3 – General data for types 60245 IEC 06 and 60245 IEC 07. 9
Table 4 – Tests for types 60245 IEC 06 and 60245 IEC 07 . 10

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
Rubber insulated cables -
Rated voltages up to and including 450/750 V -
Part 7: Heat resistant ethylene-vinyl acetate rubber insulated cables

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
may be required to implement this document. However, implementers are cautioned that this may not represent
the latest information, which may be obtained from the patent database available at https://patents.iec.ch. IEC
shall not be held responsible for identifying any or all such patent rights.
IEC 60245-7 has been prepared by IEC technical committee TC 20: Electric cables. It is an
International Standard.
This second edition cancels and replaces the first edition published in 1994,
Amendment 1:1997. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) reference to IEC 60245-2 for the tests has been deleted and replaced by IEC 63294;
b) reference to lift cable according to IEC 60245-5 has been deleted;
c) normative references have been updated.
The text of this International Standard is based on the following documents:
Draft Report on voting
20/2275/FDIS 20/2284/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members
...