EN 60939-2:2005/A1:2023

SLOVENSKI STANDARD
01-maj-2024
Pasivni filtri za dušenje elektromagnetnega motenja - 2. del: Področna
specifikacija - Pasivni filtri, ki ustrezajo varnostnim preskusom - Preskusne
metode in splošne zahteve - Dopolnilo A1 (IEC 60939-2:2005/AMD1:2023)
Passive filter units for electromagnetic interference suppression - Part 2: Sectional
specification - Passive filter units for which safety tests are appropriate - Test methods
and general requirements (IEC 60939-2:2005/AMD1:2023)
Passive Filter für die Unterdrückung von elektromagnetischen Störungen - Teil 2:
Rahmenspezifikation: Filter, für die Sicherheitsprüfungen vorgeschrieben sind -
Prüfverfahren und allgemeine Anforderungen (IEC 60939-2:2005/AMD1:2023)
Filtres passifs d’antiparasitage - Partie 2: Spécification intermédiaire - Filtres passifs pour
lesquels des essais de sécurité sont appropriés - Méthodes d’essai et exigences
générales (IEC 60939-2:2005/AMD1:2023)
Ta slovenski standard je istoveten z: EN 60939-2:2005/A1:2023
ICS:
31.160 Električni filtri Electric filters
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60939-2:2005/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM September 2023
ICS 31.160
English Version
Passive filter units for electromagnetic interference suppression -
Part 2: Sectional specification - Passive filter units for which
safety tests are appropriate - Test methods and general
requirements
(IEC 60939-2:2005/AMD1:2023)
Filtres passifs d'antiparasitage - Partie 2: Spécification Passive Filter für die Unterdrückung von
intermédiaire - Filtres passifs pour lesquels des essais de elektromagnetischen Störungen - Teil 2:
sécurité sont appropriés - Méthodes d'essai et exigences Rahmenspezifikation: Filter, für die Sicherheitsprüfungen
générales vorgeschrieben sind - Prüfverfahren und allgemeine
(IEC 60939-2:2005/AMD1:2023) Anforderungen
(IEC 60939-2:2005/AMD1:2023)
This amendment A1 modifies the European Standard EN 60939-2:2005; it was approved by CENELEC on 2023-09-21. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60939-2:2005/A1:2023 E

European foreword
The text of document 40/3059/FDIS, future IEC 60939-2/AMD1, prepared by IEC/TC 40 "Capacitors
and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 60939-2:2005/A1:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-06-21
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-09-21
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60939-2:2005/AMD1:2023 was approved by CENELEC as
a European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60664-1 NOTE Approved as EN IEC 60664-1
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
The Annex ZA of EN 60939-2:2005 applies with the following changes:
Publication Year Title EN/HD Year

Change the following references to dated references:
IEC 60336 2020 Medical electrical equipment - X-ray tube EN IEC 60336 2021
assemblies for medical diagnosis - Focal
spot dimensions and related characteristics

IEC 60384-14 2023 Fixed capacitors for use in electronic EN IEC 60384-14 2023
equipment - Part 14: Sectional
specification - Fixed capacitors for
electromagnetic interference suppression
and connection to the supply mains

IEC 60939-1 2010 Passive filter units for electromagnetic EN 60939-1 2010
interference suppression - Part 1: Generic
specification
Move the following references to the Bibliography:
IEC 60384-9 - Fixed capacitors for use in electronic EN 60384-9 -
equipment - Part 9: Sectional specification:
Fixed capacitors of ceramic dielectric,
Class 2
IEC 60938-1 2021 Fixed inductors for electromagnetic EN IEC 60938-1 2021
interference suppression - Part 1: Generic
specification
IEC 60939-2 ®
Edition 2.0 2023-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Passive filter units for electromagnetic interference suppression –
Part 2: Sectional specification – Passive filter units for which safety tests are
appropriate – Test methods and general requirements
Filtres passifs d’antiparasitage –
Partie 2: Spécification intermédiaire – Filtres passifs pour lesquels des essais
de sécurité sont appropriés – Méthodes d’essai et exigences générales
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.160 ISBN 978-2-8322-7360-9
– 2 – IEC 60939-2:2005/AMD1:2023
© IEC 2023
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
PASSIVE FILTER UNITS FOR ELECTROMAGNETIC
INTERFERENCE SUPPRESSION –
Part 2: Sectional specification – Passive filter units for which safety tests
are appropriate – Test methods and general requirements

AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
...