iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60939-3:2015/AC:2016-04

(Corrigendum)

Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate

Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate

IEC corrigendum

Passive Filter für die Unterdrückung von elektromagnetischen Störungen - Teil 3: Filter, für die Sicherheitsprüfungen vorgeschrieben sind

Filtres passifs d’antiparasitage - Partie 3: Filtres passifs pour lesquels des essais de sécurité sont appropriés

Pasivni filtri za dušenje elektromagnetnega motenja - 3. del: Enote pasivnih filtrov, za katere varnostni preskusi ustrezajo - Popravek AC

General Information

Status
Published
Publication Date
28-Apr-2016
ICS
31.160 - Electric filters
Technical Committee
CLC/TC 40XA - CLC/TC 40XA
Drafting Committee
CLC/TC 40XA - CLC/TC 40XA
Current Stage
6060 - Document made available - Publishing
Start Date
29-Apr-2016
Completion Date
29-Apr-2016
Ref Project
SIST EN 60939-3:2016/AC:2016 - Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate

Relations

Replaced By
EN IEC 60939-3:2024 - Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate
Effective Date
10-May-2022
Corrects
EN 60939-3:2015 - Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate
Effective Date
23-Jan-2023

Buy Standard

EN 60939-3:2016/AC:2016EN 60939-3:2016/AC:2016
PreviousNext
Corrigendum
EN 60939-3:2016/AC:2016
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Pasivni filtri za dušenje elektromagnetnega motenja - 3. del: Enote pasivnih filtrov, za katere varnostni preskusi ustrezajo - Popravek ACPassive Filter für die Unterdrückung von elektromagnetischen Störungen - Teil 3: Filter, für die Sicherheitsprüfungen vorgeschrieben sindFiltres passifs d’antiparasitage - Partie 3: Filtres passifs pour lesquels des essais de sécurité sont appropriésPassive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate31.160Electric filtersICS:Ta slovenski standard je istoveten z:EN 60939-3:2015/AC:2016-04SIST EN 60939-3:2016/AC:2016en01-julij-2016SIST EN 60939-3:2016/AC:2016SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 60939-3:2015/AC:2016-04
April 2016
ICS 31.160 English Version
Passive filter units for electromagnetic interference suppression -Part 3: Passive filter units for which safety tests are appropriate(IEC 60939-3:2015/COR1:2016)
Filtres passifs d'antiparasitage - Partie 3: Filtres passifs pour lesquels des essais de sécurité sont appropriés (IEC 60939-3:2015/COR1:2016)
Passive Filter für die Unterdrückung von elektromagnetischen Störungen - Teil 3: Filter, für die Sicherheitsprüfungen vorgeschrieben sind (IEC 60939-3:2015/COR1:2016) This corrigendum becomes effective on 29 April 2016 for incorporation in the English language version of the EN. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2016 CENELEC All rights of exploitation in any form and by any means reserv
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60939-3:2024(Main)
Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate
SIST EN IEC 60939-3:2024

IEC 60939-3:2024 is available as IEC 60939-3:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60939-3:2024 covers passive filters used to attenuate unwanted radio-frequency signals (such as noise or interference) generated from electromagnetic sources. Both single and multi-channel filters within one enclosure or which are built on a printed circuit board forming a compact entity are included within the scope of this document. This document applies to passive filter units for electromagnetic interference suppression for which safety tests are appropriate. This implies that filters specified according to this document will either be connected to mains supplies, when compliance with the mandatory tests of Table B.1 is necessary, or used in other circuit positions where the equipment specification specifies that some or all of these safety tests are required. This document applies to passive filter units, which will be connected to an AC mains or other supply (DC or AC) with a nominal voltage not exceeding 1 000 V AC, with a nominal frequency not exceeding 400 Hz, or 1 500 V DC. Note: For AC use, IEC 60384-14 applies to capacitors which will be connected to AC mains with a nominal frequency not exceeding 100 Hz. This document covers appliance filters (US) but does not cover facility filters, cord-connected filters or direct plug-in filters. These other filters will be covered by another sectional specification. This edition includes the following significant technical changes with respect to the previous edition: a) separated clauses for safety and performance tests; b) added note for use of multiple X capacitors bridging basic insulation in 3 phase filters; c) characteristics and conditions to substitute X and Y capacitors are now described in a separate Subclause 4.1; d) creepage and clearance tables updated and in line with the latest editions of IEC 60938-2 and IEC 60664-1; e) allowing voltage measurement for inductance measurements (7.3); f) added requirements for marking depending on remaining energy after disconnection; g) added content of CTL DSH 2044:2016 for temperature test of IEC filters; h) added note about temperature rise required specimens for safety testing; i) changed index of capacitors in Annex A to avoid confusion between index name and capacitor class; j) moved tests from group 1A to 2. Now, samples in group 1A need to be submitted without potting; k) revision of all parts of the document has taken place based on the ISO/IEC Directives, Part 2:2021, and harmonization with other similar kinds of documents. Annex X contains all cross-references of changes in clause/subclause numbers.

  • Standard
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60939-2:2005/A1:2023(Amendment)
Passive filter units for electromagnetic interference suppression - Part 2: Sectional specification - Passive filter units for which safety tests are appropriate - Test methods and general requirements
SIST EN 60939-2:2005/A1:2024
  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60939-3:2015/AC:2018-08(Corrigendum)
Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate
SIST EN 60939-3:2016/AC:2018

IEC - Corrected version

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60939-3:2015(Main)
Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate
SIST EN 60939-3:2016

IEC 60939-3:2015 covers passive filters used to attenuate unwanted radio-frequency signals (such as noise or interference) generated from electromagnetic sources. Both single and multi-channel filters within one enclosure or which are built on a printed circuit board forming a compact entity are included within the scope of this specification. This specification applies to passive filter units for electromagnetic interference suppression for which safety tests are appropriate. This implies that filters specified according to this specification will either be connected to mains supplies, when compliance with the mandatory tests of Table 3 is necessary, or used in other circuit positions where the equipment specification prescribes that some or all of these safety tests are required. This specification applies to passive filter units, which will be connected to an a.c. mains or other supply (d.c. or a.c.) with a nominal voltage not exceeding 1 000 V a.c., with a nominal frequency not exceeding 400 Hz, or 1 500 V d.c.

  • Standard
    78 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60939-1:2010(Main)
Passive filter units for electromagnetic interference suppression - Part 1: Generic specification
SIST EN 60939-1:2010

IEC 60939-1:2010 relates to passive filter units for electromagnetic interference suppression for use within, or associated with, electronic or electrical equipment and machines. Both single and multi-channel filters within one enclosure are included within the scope of this generic specification. This generic specification establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications within the IECQ-CECC system for electronic components. This edition includes the following significant technical changes with respect to the previous edition: a) table 3 has been updated, specifying how to handle the Neutral by 3-phase filter with Neutral; b) all details about 'Quality assessment' have been deleted in this edition, because this standard is a safety standard; c) filters shall be subjected to Test Aa of IEC 60068-2-1 for 16 h, using the degree of severity of the lower category temperature as prescribed in the relevant specification; d) since IEC 60068-2-20 does no longer make a difference between Method 1A and 1B, but only describes Method 1, references to the method to be used are updated.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60939-2:2005(Main)
Passive filter units for electromagnetic interference suppression - Part 2: Sectional specification: Passive filter units for which safety tests are appropriate - Test methods and general requirements
SIST EN 60939-2:2005

applies to passive filter units for electromagnetic interference suppression which fall within the scope of the Generic Specification EN 60939-1. The scope of this Sectional specification is restricted to passive filter units for which safety tests are appropriate. This implies that filters specified according to this Sectional specification will either be connected to mains supplies, when compliance with the mandatory tests of Table 3 is necessary, or used in other circuit positions where the equipment specification prescribes that some or all of these safety tests are required.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60939-3:2024(Main)
Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate
SIST EN IEC 60939-3:2024

IEC 60939-3:2024 is available as IEC 60939-3:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60939-3:2024 covers passive filters used to attenuate unwanted radio-frequency signals (such as noise or interference) generated from electromagnetic sources. Both single and multi-channel filters within one enclosure or which are built on a printed circuit board forming a compact entity are included within the scope of this document. This document applies to passive filter units for electromagnetic interference suppression for which safety tests are appropriate. This implies that filters specified according to this document will either be connected to mains supplies, when compliance with the mandatory tests of Table B.1 is necessary, or used in other circuit positions where the equipment specification specifies that some or all of these safety tests are required. This document applies to passive filter units, which will be connected to an AC mains or other supply (DC or AC) with a nominal voltage not exceeding 1 000 V AC, with a nominal frequency not exceeding 400 Hz, or 1 500 V DC. Note: For AC use, IEC 60384-14 applies to capacitors which will be connected to AC mains with a nominal frequency not exceeding 100 Hz. This document covers appliance filters (US) but does not cover facility filters, cord-connected filters or direct plug-in filters. These other filters will be covered by another sectional specification. This edition includes the following significant technical changes with respect to the previous edition: a) separated clauses for safety and performance tests; b) added note for use of multiple X capacitors bridging basic insulation in 3 phase filters; c) characteristics and conditions to substitute X and Y capacitors are now described in a separate Subclause 4.1; d) creepage and clearance tables updated and in line with the latest editions of IEC 60938-2 and IEC 60664-1; e) allowing voltage measurement for inductance measurements (7.3); f) added requirements for marking depending on remaining energy after disconnection; g) added content of CTL DSH 2044:2016 for temperature test of IEC filters; h) added note about temperature rise required specimens for safety testing; i) changed index of capacitors in Annex A to avoid confusion between index name and capacitor class; j) moved tests from group 1A to 2. Now, samples in group 1A need to be submitted without potting; k) revision of all parts of the document has taken place based on the ISO/IEC Directives, Part 2:2021, and harmonization with other similar kinds of documents. Annex X contains all cross-references of changes in clause/subclause numbers.

  • Standard
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60939-2:2005/A1:2023(Amendment)
Passive filter units for electromagnetic interference suppression - Part 2: Sectional specification - Passive filter units for which safety tests are appropriate - Test methods and general requirements
SIST EN 60939-2:2005/A1:2024
  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50065-4-1:2023(Main)
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-1: Low voltage decoupling filters - Generic specification
SIST EN 50065-4-1:2023

This document applies to decoupling filters installed on the low voltage mains network and operating in the frequency range 3 kHz to 148,5 kHz. It does not apply to EMI suppression filters incorporated in household equipment or other general electric equipment. It specifies the definitions, requirements and test methods of the functional, technical and environmental characteristics of the decoupling filter, e.g. impedance, transfer function, voltage drop, leakage current and power dissipation. The impedance and the transfer function are referred to the decoupling filter mains power ports (see Figure 1).

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50065-4-4:2023(Main)
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-4: Low voltage decoupling filter - Impedance filter
SIST EN 50065-4-4:2023

This document applies to impedance filters in a mains communication system, intended for utility networks or household and similar fixed installation including residential, commercial and light industrial buildings. These filters are used to set a suitable impedance, in the nominal frequency range of the mains signalling system, at any point of the low voltage mains network where a low impedance equipment is connected, as shown in Figure 1, in order to allow reliable operation of the mains signalling system. Impedance filters can be used either in utility or consumer networks. They can also be used in conjunction with incoming filters and segmentation filters. [Figure 1 - The application of impedance filters]

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day