EN 61784-1:2010

SLOVENSKI STANDARD
01-december-2010
1DGRPHãþD
SIST EN 61784-1:2008
Industrijska komunikacijska omrežja - Profili - 1. del: Profili procesnih vodil (IEC
61784-1:2010)
Industrial communication networks - Profiles - Part 1: Fieldbus profiles (IEC 61784-
1:2010)
Industrielle Kommunikationsnetze - Profile - Teil 1: Feldbusprofile (IEC 61784-1:2010)
Réseaux de communication industriels - Profils - Partie 1: Profils pour les bus de terrain
(CEI 61784-1:2010)
Ta slovenski standard je istoveten z: EN 61784-1:2010
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.05 9HþVORMQHXSRUDEQLãNH Multilayer applications
UHãLWYH
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61784-1
NORME EUROPÉENNE
October 2010
EUROPÄISCHE NORM
ICS 35.100.20; 35.240.50 Supersedes EN 61784-1:2008

English version
Industrial communication networks -
Profiles -
Part 1: Fieldbus profiles
(IEC 61784-1:2010)
Réseaux de communication industriels -  Industrielle Kommunikationsnetze -
Profils - Profile -
Partie 1: Profils pour les bus de terrain Teil 1: Feldbusprofile
(CEI 61784-1:2010) (IEC 61784-1:2010)

This European Standard was approved by CENELEC on 2010-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61784-1:2010 E
Foreword
The text of document 65C/600/FDIS, future edition 3 of IEC 61784-1, prepared by SC 65C, Industrial
networks, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61784-1 on 2010-09-01.
This European Standard supersedes EN 61784-1:2008.
The main changes with respect to the previous edition are listed below:
– update of the dated references to the EN 61158 series, to EN 61784-2, to the EN 61784-3 series, to
the EN 61784-5 series and to EN 61918 throughout the document;
– update of the titles of the referenced documents and references if needed;
– update of selection tables for CPF 1, CPF 2, CPF 5 and CPF 8.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-06-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2013-09-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61784-1:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60079-14:2007 NOTE  Harmonized as EN 60079-14:2008 (not modified).
IEC 60079-25 NOTE  Harmonized as EN 60079-25.
IEC 60793 series NOTE  Harmonized in EN 60793 series (partially modified).
IEC 61131-3 NOTE  Harmonized as EN 61131-3.
IEC/TR 61158-1:2010 NOTE  Harmonized as CLC/TR 61158-1:2010 (not modified).
ISO/IEC 7498-1 NOTE  Harmonized as EN ISO/IEC 7498-1.
__________
- 3 - EN 61784-1:2010
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60079-11 - Explosive atmospheres - EN 60079-11 -
Part 11: Equipment protection by intrinsic
safety "i"
IEC 60079-27 - Explosive atmospheres - EN 60079-27 -
Part 27: Fieldbus intrinsically safe concept
(FISCO)
IEC 61010 Series Safety requirements for electrical equipment EN 61010 Series
for measurement, control and laboratory use

IEC 61131-2 - Programmable controllers - EN 61131-2 -
Part 2: Equipment requirements and tests

IEC 61158-2 2010 Industrial communication networks - Fieldbus EN 61158-2 2010
specifications -
Part 2: Physical layer specification and service
definition
IEC 61158-3-1 2007 Industrial communication networks - Fieldbus EN 61158-3-1 2008
specifications -
Part 3-1: Data-link layer service definition -
Type 1 elements
IEC 61158-3-2 2007 Industrial communication networks - Fieldbus EN 61158-3-2 2008
specifications -
Part 3-2: Data-link layer service definition -
Type 2 elements
IEC 61158-3-3 2007 Industrial communication networks - Fieldbus EN 61158-3-3 2008
specifications -
Part 3-3: Data-link layer service definition -
Type 3 elements
IEC 61158-3-4 2007 Industrial communication networks - Fieldbus EN 61158-3-4 2008
specifications -
Part 3-4: Data-link layer service definition -
Type 4 elements
IEC 61158-3-7 2007 Industrial communication networks - Fieldbus EN 61158-3-7 2008
specifications -
Part 3-7: Data-link layer service definition -
Type 7 elements
IEC 61158-3-8 2007 Industrial communication networks - Fieldbus EN 61158-3-8 2008
specifications -
Part 3-8: Data-link layer service definition -
Type 8 elements
Publication Year Title EN/HD Year

IEC 61158-3-16 2007 Industrial communication networks - Fieldbus EN 61158-3-16 2008
specifications -
Part 3-16: Data-link layer service definition -
Type 16 elements
IEC 61158-3-18 2007 Industrial communication networks - Fieldbus EN 61158-3-18 2008
specifications -
Part 3-18: Data-link layer service definition -
Type 18 elements
IEC 61158-4-1 2007 Industrial communication networks - Fieldbus EN 61158-4-1 2008
specifications -
Part 4-1: Data-link layer protocol specification
- Type 1 elements
IEC 61158-4-2 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 4-2: Data-link layer protocol specification
- Type 2 elements
IEC 61158-4-3 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 4-3: Data-link layer protocol specification
- Type 3 elements
IEC 61158-4-4 2007 Industrial communication networks - Fieldbus EN 61158-4-4 2008
specifications -
Part 4-4: Data-link layer protocol specification
- Type 4 elements
IEC 61158-4-7 2007 Industrial communication networks - Fieldbus EN 61158-4-7 2008
specifications -
Part 4-7: Data-link layer protocol specification
- Type 7 elements
IEC 61158-4-8 2007 Industrial communication networks - Fieldbus EN 61158-4-8 2008
specifications -
Part 4-8: Data-link layer protocol specification
- Type 8 elements
IEC 61158-4-16 2007 Industrial communication networks - Fieldbus EN 61158-4-16 2008
specifications -
Part 4-16: Data-link layer protocol
specification - Type 16 elements

IEC 61158-4-18 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 4-18: Data-link layer protocol
specification - Type 18 elements

IEC 61158-5-2 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 5-2: Application layer service definition -
Type 2 elements
IEC 61158-5-3 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 5-3: Application layer service definition -
Type 3 elements
IEC 61158-5-4 2007 Industrial communication networks - Fieldbus EN 61158-5-4 2008
specifications -
Part 5-4: Application layer service definition -
Type 4 elements
- 5 - EN 61784-1:2010
Publication Year Title EN/HD Year

IEC 61158-5-5 2007 Industrial communication networks - Fieldbus EN 61158-5-5 2008
specifications -
Part 5-5: Application layer service definition -
Type 5 elements
IEC 61158-5-7 2007 Industrial communication networks - Fieldbus EN 61158-5-7 2008
specifications -
Part 5-7: Application layer service definition -
Type 7 elements
IEC 61158-5-8 2007 Industrial communication networks - Fieldbus EN 61158-5-8 2008
specifications -
Part 5-8: Application layer service definition -
Type 8 elements
IEC 61158-5-9 2007 Industrial communication networks - Fieldbus EN 61158-5-9 2008
specifications -
Part 5-9: Application layer service definition -
Type 9 elements
IEC 61158-5-10 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 5-10: Application layer service definition -
Type 10 elements
IEC 61158-5-16 2007 Industrial communication networks - Fieldbus EN 61158-5-16 2008
specifications -
Part 5-16: Application layer service definition -
Type 16 elements
IEC 61158-5-18 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 5-18: Application layer service definition -
Type 18 elements
IEC 61158-5-20 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 5-20: Application layer service definition -
Type 20 elements
IEC 61158-6-2 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 6-2: Application layer protocol
specification - Type 2 elements

IEC 61158-6-3 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 6-3: Application layer protocol
specification - Type 3 elements

IEC 61158-6-4 2007 Industrial communication networks - Fieldbus EN 61158-6-4 2008
specifications -
Part 6-4: Application layer protocol
specification - Type 4 elements

IEC 61158-6-5 2007 Industrial communication networks - Fieldbus EN 61158-6-5 2008
specifications -
Part 6-5: Application layer protocol
specification - Type 5 elements

IEC 61158-6-7 2007 Industrial communication networks - Fieldbus EN 61158-6-7 2008
specifications -
Part 6-7: Application layer protocol
specification - Type 7 elements

Publication Year Title EN/HD Year

IEC 61158-6-8 2007 Industrial communication networks - Fieldbus EN 61158-6-8 2008
specifications -
Part 6-8: Application layer protocol
specification - Type 8 elements

IEC 61158-6-9 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 6-9: Application layer protocol
specification - Type 9 elements

IEC 61158-6-10 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 6-10: Application layer protocol
specification - Type 10 elements

IEC 61158-6-16 2007 Industrial communication networks - Fieldbus EN 61158-6-16 2008
specifications -
Part 6-16: Application layer protocol
specification - Type 16 elements

IEC 61158-6-18 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 6-18: Application layer protocol
specification - Type 18 elements

IEC 61158-6-20 2010 Industrial communication networks - Fieldbus - -
specifications -
Part 6-20: Application layer protocol
specification - Type 20 elements

IEC 61784-2 2010 Industrial communication networks - Profiles - EN 61784-2 2010
Part 2: Additional fieldbus profiles for real-time
networks based on ISO/IEC 8802-3

IEC 61784-5-2 2010 Industrial communication networks - Profiles - - -
Part 5-2: Installation of fieldbuses - Installation
profiles for CPF 2
IEC 61918 (mod) 2010 Industrial communication networks - prEN 61918 2009
Installation of communication networks in
industrial premises
IEC 62026-3 - Low-voltage switchgear and controlgear - EN 62026-3 -
Controller-device interfaces (CDIs) -
Part 3: DeviceNet
ISO/IEC 8802-2 1998 Information technology - Telecommunications - -
and information exchange between systems -
Local and metropolitan area networks -
Specific requirements -
Part 2: Logical link control
ISO/IEC 8802-3 2000 Information technology - Telecommunications - -
and information exchange between systems -
Local and metropolitan area networks -
Specific requirements -
Part 3: Carrier sense multiple access with
collision detection (CSMA/CD) access method
and physical layer specifications

ISO 15745-3 2003 Industrial automation systems and integration - -
- Open systems application integration
framework -
Part 3: Reference description for IEC 61158
based control systems
- 7 - EN 61784-1:2010
Publication Year Title EN/HD Year

ISO 15745-4 2003 Industrial automation systems and integration - -
- Open systems application integration
framework -
Part 4: Reference description for Ethernet-
based control systems
ANSI TIA/EIA-232-F 1997 Interface between data terminal equipment - -
and data circuit - Terminating equipment
employing serial binary data interchange

ANSI TIA/EIA-485-A 1998 Electrical Characteristics of Generators and - -
Receivers for Use in Balanced Digital
Multipoint Systems
IEEE 802.3 2002 IEEE Standard for Information technology - - -
Telecommunications and information
exchange between systems - Local and
metropolitan area networks - Specific
requirements -
Part 3: Carrier Sense Multiple Access with
Collision Detection (CSMA/CD) - Access
Method and Physical Layer Specifications

IETF RFC 768 - User Datagram Protocol - -

IETF RFC 791 - Internet Protocol - DARPA Internet Program - -
Protocol Specification
IETF RFC 792 - Internet Control Message Protocol - -

IETF RFC 793 - Transmission Control Protocol - DARPA - -
Internet Program Protocol Specification

IETF RFC 826 - Ethernet Address Resolution Protocol - -

IETF RFC 894 - Standard for the Transmission of IP - -
Datagrams over Ethernet Networks

IETF RFC 1112 - Host Extensions for IP Multicasting - -

IETF RFC 1123 - Requirements for Internet Hosts - Application - -
and Support
IETF RFC 1122 - Requirements for Internet Hosts - - -
Communication Layers
IETF RFC 1127 - Perspective on the Host Requirements RFCs - -

IETF RFC 2236 - Internet Group Management Protocol A - -

IEC 61784-1 ®
Edition 3.0 2010-07
INTERNATIONAL
STANDARD
Industrial communication networks – Profiles –
Part 1: Fieldbus profiles
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XL
ICS 35.100.20, 35.240.50 ISBN 978-2-88912-062-8
– 2 – 61784-1 © IEC:2010(E)
CONTENTS
FOREWORD.13
INTRODUCTION.15
1 Scope.16
2 Normative references .17
3 Definitions .21
3.1 Terms and definitions .21
3.2 Abbreviations and symbols.21
3.2.1 IEC 61158 abbreviations and symbols .21
3.2.2 Other abbreviations and symbols.21
3.3 Conventions .22
3.3.1 Conventions common to all layers .22
3.3.2 Physical layer .23
3.3.3 Data-link layer .23
3.3.4 Application layer.24
4 Conformance to communication profiles .24
5 Communication Profile Family 1 (FOUNDATION® Fieldbus) .25
5.1 General overview .25
5.2 Profile 1/1 (FF H1).26
5.2.1 Physical layer .26
5.2.2 Data-link layer .41
5.2.3 Application layer.105
5.3 Profile 1/2 (FF HSE) .106
5.3.1 Physical layer .106
5.3.2 Data-link layer .106
5.3.3 Network layer .106
5.3.4 Transport layer .106
5.3.5 Application layer.107
5.4 Profile 1/3 (FF H2).107
5.4.1 Physical layer .107
5.4.2 Data-link layer .109
5.4.3 Application layer.109
6 Communication Profile Family 2 (CIP™).109
6.1 General overview .109
6.2 Profile 2/1 (ControlNet) .110
6.2.1 Physical layer .110
6.2.2 Data-link layer .111
6.2.3 Application layer.113
6.3 Profile 2/2 (EtherNet/IP) .114
6.3.1 Physical layer .114
6.3.2 Data-link layer .114
6.3.3 Application layer.115
6.4 Profile 2/3 (DeviceNet) .116
6.4.1 Physical layer .116
6.4.2 Data-link layer .116
6.4.3 Application layer.117
7 Communication Profile Family 3 (PROFIBUS & PROFINET) .119

61784-1 © IEC:2010(E) – 3 –
7.1 General overview .119
7.2 Profile 3/1 (PROFIBUS DP) .121
7.2.1 Physical layer .121
7.2.2 Data-link layer .123
7.2.3 Application layer.142
7.3 Profile 3/2 (PROFIBUS PA) .188
7.3.1 Physical layer .188
7.3.2 Data-link layer .191
7.3.3 Application layer.201
7.4 Profile 3/3 (PROFINET CBA) .201
7.4.1 Physical layer .201
7.4.2 Data-link layer .201
7.4.3 Application layer.202
8 Communication Profile Family 4 (P-NET®) .203
8.1 General overview .203
8.2 Profile 4/1 (P-NET RS-485) .203
8.2.1 Physical layer .203
8.2.2 Data-link layer .204
8.2.3 Application layer.205
8.3 Profile 4/2 (P-NET RS-232) .206
8.3.1 Physical layer .206
8.3.2 Data-link layer .207
8.3.3 Application layer.207
9 Communication Profile Family 5 (WorldFIP®) .208
9.1 General overview .208
9.2 Profile 5/1 (WorldFIP).209
9.2.1 Physical layer .209
9.2.2 Data-link layer .210
9.2.3 Application layer.212
9.3 Profile 5/2 (WorldFIP).217
9.3.1 Physical layer .217
9.3.2 Data-link layer .217
9.3.3 Application layer.217
9.4 Profile 5/3 (WorldFIP).221
9.4.1 Physical layer .221
9.4.2 Data-link layer .222
9.4.3 Application layer.222
10 Communication Profile Family 6 (INTERBUS®) .223
10.1 General overview .223
10.2 Profile 6/1 .224
10.2.1 Physical layer .224
10.2.2 Data-link layer .225
10.2.3 Application layer.226
10.3 Profile 6/2 .227
10.3.1 Physical layer .227
10.3.2 Data-link layer .227
10.3.3 Application layer.228
10.4 Profile 6/3 .230
10.4.1 Physical layer .230

– 4 – 61784-1 © IEC:2010(E)
10.4.2 Data-link layer .230
10.4.3 Application layer.231
11 Communication Profile Family 7 (This Clause has been removed) . 232
12 Communication Profile Family 8 (CC-Link) .232
12.1 General overview .232
12.1.1 General .232
12.1.2 Profile 8/1.232
12.1.3 Profile 8/2.233
12.1.4 Profile 8/3.233
12.2 Profile 8/1 .233
12.2.1 Physical layer .233
12.2.2 Data-link layer .234
12.2.3 Application layer.236
12.3 Profile 8/2 .239
12.3.1 Physical layer .239
12.3.2 Data-link layer .239
12.3.3 Application layer.239
12.4 Profile 8/3 .239
12.4.1 Physical layer .239
12.4.2 Data-link layer .240
12.4.3 Application layer.242
13 Communication Profile Family 9 (HART).244
13.1 General Overview.244
13.2 Profile 9/1, universal command .244
13.2.1 Physical layer .244
13.2.2 Data-link layer .244
13.2.3 Application layer.244
14 Communication Profile Family 16 (SERCOS).245
14.1 General overview .245
14.2 Profile 16/1 (SERCOS I).246
14.2.1 Physical layer selection .246
14.2.2 Data-link layer .246
14.2.3 Application layer.247
14.3 Profile 16/2 (SERCOS II).247
14.3.1 Physical layer .247
14.3.2 Data-link layer .248
14.3.3 Application layer.248
Annex A (informative) Communication concepts .249
Annex B (informative) Added value of IEC 61784-1.263
Bibliography.264

Figure 1 – Communication profile families and profiles .16
Figure 2 – Example optical power budget for a 100/140 μm fiber system with a 16/16
optical passive star coupler.40
Figure 3 – CP 3/2 Slave devices usable in applications.121
Figure A.1 – Ring structure .261
Figure A.2 – Topology example.262

61784-1 © IEC:2010(E) – 5 –
Table 1 – Relations of Communication Profile Families to type numbers .17
Table 2 – Layout of profile (sub)clause selection tables .22
Table 3 – Contents of (sub)clause selection tables .22
Table 4 – Layout of service selection tables.22
Table 5 – Contents of service selection tables .23
Table 6 – Layout of parameter selection tables .23
Table 7 – Contents of parameter selection tables .23
Table 8 – Layout of class attribute selection tables .24
Table 9 – Contents of class attribute selection tables.24
Table 10 – CPF 1: overview of profile sets .25
Table 11 – CP 1/1: PhL selection for communicating devices and their MAUs.26
Table 12 – CP 1/1: PhL classification of MAUs and attached devices.28
Table 13 – CP 1/1: PhL selection of Clause 16 for devices and their MAUs .28
Table 14 – CP 1/1: PhL selection of Clause 12 for devices and their MAUs .29
Table 15 – CP 1/1: PhL selection of Clause 21 for devices and their MAUs (denigrated).30
Table 16 – CP 1/1: PhL selection of recommended IS parameters for FF MAU classes
111, 112, 121, 122, 511 and 512 .31
Table 17 – CP 1/1: PhL selection for media components.32
Table 18 – CP 1/1: PhL selection of imperative IS parameters for media in FISCO
systems .32
Table 19 – CP 1/1: PhL selection for power supplies .33
Table 20 – CP 1/1: PhL selection of power supply types .33
Table 21 – CP 1/1: PhL selection of permissible output voltage and IS parameters for
FISCO power supplies .34
Table 22 – CP 1/1: PhL selection for terminators .35
Table 23 – CP 1/1: PhL selection of IS parameters for terminators .35
Table 24 – CP 1/1: PhL selection of Clause 12 for intrinsic safety barriers.36
Table 25 – CP 1/1: PhL selection of recommended IS parameters for intrinsic safety
barriers and galvanic isolators (Entity model only) .37
Table 26 – CP 1/1: PhL selection of Clause 12 for intrinsically safe galvanic isolators .38
Table 27 – CP 1/1: PhL selection of Clause 15, recommended optical fiber types .39
Table 28 – CP 1/1: PhL selection of passive star couplers, recommended maximum
insertion loss .39
Table 29 – CP 1/1: PhL selection of active star couplers.39
Table 30 – CP 1/1: Optical power budget considerations .40
Table 31 – CP 1/1: DLL service selection.41
Table 32 – CP 1/1: DLL service selection of Clause 5 .41
Table 33 – CP 1/1: DLL service selection of 5.4.41
Table 34 – CP 1/1: DLL service selection of 5.4.1.42
Table 35 – CP 1/1: DLL service selection of 5.4.3.42
Table 36 – CP 1/1: DLL service selection of 5.4.6.43
Table 37 – CP 1/1: DLL service selection of Clause 6 .43
Table 38 – CP 1/1: DLL service selection of the summary of 6.3, DL-connection QoS.44
Table 39 – CP 1/1: DLL service selection of figures 9–14 of 6.4.44

– 6 – 61784-1 © IEC:2010(E)
Table 40 – CP 1/1: DLL service selection of 6.5.44
Table 41 – CP 1/1: DLL service selection: replacement for Table 13 of 6.5 .45
Table 42 – CP 1/1: DLL service selection of 6.5, replacement for Table 14 .45
Table 43 – CP 1/1: DLL service selection of 6.5 for use of addresses for peer DLC .46
Table 44 – CP 1/1: DLL service selection of 6.5 for use of addresses for multipeer DLC
connect request at publisher .46
Table 45 – CP 1/1: DLL service selection of 6.5 for use of addresses for multipeer DLC
connect request at subscriber .46
Table 46 – CP 1/1: DLL service selection of 6.6.46
Table 47 – CP 1/1: DLL service selection: replacement for Table 15 of 6.6 .47
Table 48 – CP 1/1: DLL service selection of 6.7.47
Table 49 – CP 1/1: DLL service selection of 6.7, replacement for Table 16 .47
Table 50 – CP 1/1: DLL service selection of 6.7, replacement for Table 17 .47
Table 51 – CP 1/1: DLL service selection of 6.7, replacement for Table 18 .48
Table 52 – CP 1/1: DLL service selection of Clause 7 .48
Table 53 – CP 1/1: DLL service selection of 7.5, replacement for Table 23 .49
Table 54 – CP 1/1: DLL service selection of Clause 8 .49
Table 55 – CP 1/1: DLL service selection of 8.5, replacement for Table 28 .49
Table 56 – CP 1/1: DLL protocol selection .50
Table 57 – CP 1/1: DLL protocol selection of Clause 4.50
Table 58 – CP 1/1: DLL protocol selection of 4.3 .51
Table 59 – CP 1/1: DLL protocol selection of 4.3.2.1 for use of link designators.51
Table 60 – CP 1/1: DLL protocol selection of 4.3.2.2 for use of node designators .51
Table 61 – CP 1/1: DLL protocol selection of 4.3.3.1 for predefined flat non–local
DL-addresses .51
Table 62 – CP 1/1: DLL protocol selection of 4.3.3.2 for predefined flat link–local
DL-addresses .52
Table 63 – CP 1/1: DLL protocol selection of 4.3.3.3 for predefined node–local
DL-addresses .52
Table 64 – CP 1/1: DLL protocol selection of 4.7 .52
Table 65 – CP 1/1: DLL protocol selection of 4.7.4 .53
Table 66 – CP 1/1: DLL protocol selection of 4.7.5 .54
Table 67 – CP 1/1: DLL protocol selection of Clause 6.55
Table 68 – CP 1/1: DLL protocol selection, replacement for Table 10 of 6.0.56
Table 69 – CP 1/1: DLL protocol selection of 6.5 .57
Table 70 – CP 1/1: DLL protocol selection of 6.7 .60
Table 71 – CP 1/1: DLL protocol selection of 6.8 .64
Table 72 – CP 1/1: DLL protocol selection of 6.11 .65
Table 73 – CP 1/1: DLL protocol selection of 6.12 .65
Table 74 – CP 1/1: DLL protocol selection of 6.15 .66
Table 75 – CP 1/1: DLL protocol selection of 6.20 .67
Table 76 – CP 1/1: DLL protocol selection of Clause 7.68
Table 77 – CP 1/1: DLL protocol selection of 7.4 .69
Table 78 – CP 1/1: DLL protocol selection of Clause 8.70
Table 79 – CP 1/1: DLL protocol selection of 8.2 .71

61784-1 © IEC:2010(E) – 7 –
Table 80 – CP 1/1: DLL protocol selection of 8.2.2 .81
Table 81 – CP 1/1: DLL protocol selection of 8.3 .93
Table 82 – CP 1/1: DLL protocol selection of 8.4 .94
Table 83 – CP 1/1: DLL protocol selection of Clause 9.95
Table 84 – CP 1/1: DLL protocol selection of 9.3 .96
Table 85 – CP 1/1: DLL protocol selection of 9.3.5 .98
Table 86 – CP 1/1: DLL protocol selection of 9.3.5.2.2, replacement for element
encoding.99
Table 87 – CP 1/1: DLL protocol selection of Clause
...