EN IEC 61189-2-804:2023

SLOVENSKI STANDARD
01-december-2023
Preskusne metode za električne materiale, tiskana vezja in druge povezovalne
strukture in sestave - 2-804. del: Preskus ugotavljanja razmerja čas-delaminacija -
T260, T288, T300
Test methods for electrical materials, printed board and other interconnection structures
and assemblies - Part 2-804: Test methods for time to delamination - T260, T288, T300
Prüfverfahren für Elektromaterialien, Leiterplatten und andere Verbindungsstrukturen
und Baugruppen – Teil 2-804: Prüfverfahren für die Zeit bis zur Delaminierung – T260,
T288, T300
Méthodes d'essai pour les matériaux électriques, les cartes imprimées et autres
structures d'interconnexion et ensembles - Partie 2-804: Méthodes d'essai pour le temps
de décollement interlaminaire - T260, T288, T300
Ta slovenski standard je istoveten z: EN IEC 61189-2-804:2023
ICS:
31.180 Tiskana vezja (TIV) in tiskane Printed circuits and boards
plošče
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61189-2-804

NORME EUROPÉENNE
EUROPÄISCHE NORM October 2023
ICS 31.180
English Version
Test methods for electrical materials, printed board and other
interconnection structures and assemblies - Part 2-804: Test
methods for time to delamination - T260, T288, T300
(IEC 61189-2-804:2023)
Méthodes d'essai pour les matériaux électriques, les cartes Prüfverfahren für Elektromaterialien, Leiterplatten und
imprimées et autres structures d'interconnexion et andere Verbindungsstrukturen und Baugruppen - Teil 2-
ensembles - Partie 2-804: Méthodes d'essai pour le temps 804: Prüfverfahren für die Zeit bis zur Delaminierung -
de décollement interlaminaire - T260, T288, T300 T260, T288, T300
(IEC 61189-2-804:2023) (IEC 61189-2-804:2023)
This European Standard was approved by CENELEC on 2023-09-29. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61189-2-804:2023 E

European foreword
The text of document 91/1874/FDIS, future edition 1 of IEC 61189-2-804, prepared by IEC/TC 91
"Electronics assembly technology" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 61189-2-804:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-06-29
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-09-29
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61189-2-804:2023 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60194-1 - Printed boards design, manufacture and - -
assembly - Vocabulary - Part 1: Common
usage in printed board and electronic
assembly technologies
IEC 61189-2-804 ®
Edition 1.0 2023-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Test methods for electrical materials, printed board and other interconnection

structures and assemblies –
Part 2-804: Test methods for time to delamination – T260, T288, T300

Méthodes d'essai pour les matériaux électriques, les cartes imprimées et autres

structures d'interconnexion et ensembles –

Partie 2-804: Méthodes d'essai pour le temps de décollement interlaminaire –

T260, T288, T300
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.180  ISBN 978-2-8322-7422-4

– 2 – IEC 61189-2-804:2023 © IEC 2023
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Specimen preparation . 5
5 Test specimens . 5
6 Test equipment . 6
7 Test procedure . 6
8 Calculation . 6
9 Report . 7
Bibliography . 8

Figure 1 – A typical plot for an epoxy material at an isothermal temperature of 260 °C . 7

IEC 61189-2-804:2023 © IEC 2023 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND
OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES –

Part 2-804: Test methods for time to delamination – T260, T288, T300

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters ex
...