EN 62379-5-1:2014

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gemeinsame Steuerschnittstelle für netzwerkbetriebene digitale Audio- und Videogeräte - Teil 5-1: Übertragung über Netzwerke - Allgemeines (IEC 62379-5-1:2014)VCommon control interface for networked digital audio and video products - Part 5-1: Transmission over networks - General (IEC 62379-5-1:2014)35.200Vmesniška in povezovalna opremaInterface and interconnection equipment33.160.01Avdio, video in avdiovizualni sistemi na splošnoAudio, video and audiovisual systems in generalICS:Ta slovenski standard je istoveten z:EN 62379-5-1:2014SIST EN 62379-5-1:2014en,fr,de01-december-2014SIST EN 62379-5-1:2014SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 62379-5-1
October 2014 ICS 35.100; 33.160
English Version
Common control interface for networked digital audio and video products - Part 5-1: Transmission over networks - General (IEC 62379-5-1:2014)
Interface de commande commune pour produits audio et vidéo numériques connectés en réseau - Partie 5-1: Transmission sur des réseaux - Généralités (CEI 62379-5-1:2014)
Gemeinsame Steuerschnittstelle für netzwerkbetriebene digitale Audio- und Videogeräte - Teil 5-1: Übertragung über Netzwerke - Allgemeines (IEC 62379-5-1:2014) This European Standard was approved by CENELEC on 2014-08-13. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62379-5-1:2014 E SIST EN 62379-5-1:2014

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62379-5-1:2014 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated : IEC 62379
NOTE Harmonized in EN 62379
series.
- 3 - EN 62379-5-1:2014 Annex ZA (normative)
Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Publication Year Title EN/HD Year IEC 62379-1 2007
Common control interface for networked digital audio and video products - Part 1: General EN 62379-1 2007
IEC 62379-5-2 2014
Common control interface for networked digital audio and video products - Part 5-2: Transmission over networks - Signalling EN 62379-5-2 2014
IEC 62379-5-1 Edition 1.0 2014-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Common control interface for networked digital audio and video products –
Part 5-1: Transmission over networks – General
Interface de commande commune pour produits audio et vidéo numériques connectés en réseau –
Partie 5-1: Transmission sur des réseaux – Généralités
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE X ICS 33.160; 35.100 PRICE CODE CODE PRIX ISBN 978-2-8322-1693-4
– 2 – IEC 62379-5-1:2014  IEC 2014 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope . 7 2 Normative references . 7 3 Terms, definitions and abbreviations . 7 3.1 Terms and definitions. 7 3.2 Abbreviations . 7 4 Network service specifications . 8 4.1 Service for live media . 8 4.2 Service for management messages . 8 5 MIB definitions applicable to all networks . 8 5.1 General . 8 5.2 Type definitions . 8 5.3 Conceptual row type definitions . 9 5.4 MIB object definitions . 10 5.4.1 Network ports . 10 5.4.2 List of media sources . 12 5.4.3 List of live media destinations . 14 6 Calls . 19 6.1 List of destinations in end equipment . 19 6.2 Connecting a flow . 20 6.3 Terminating a flow . 20 6.4 Maintaining calls . 21 7 Status broadcasts . 21 7.1 General . 21 7.2 Coding and encapsulation of reports . 22 7.3 Standard report groups . 23 7.3.1 General . 23 7.3.2 List of sources . 23 7.3.3 List of destinations . 23 Annex A (informative)
Machine-readable block definitions. 24 Annex B (informative)
Machine-readable data formats . 36 Annex C (informative)
Support for future networks . 39 C.1 General . 39 C.2 Services provided by the network . 39 C.3 Network ports, flows, and media streams . 40 C.3.1 Calls and flows . 40 C.3.2 Connectivity model . 40 C.3.3 Privilege . 40 C.3.4 Call identity . 40 C.4 Control of routing . 41 C.5 Scheduled calls . 41 Bibliography . 42
Table 1 – Managed objects for network ports . 10 SIST EN 62379-5-1:2014

IEC 62379-5-1:2014  IEC 2014 – 3 – Table 2 – Managed objects conveying the list of sources . 12 Table 3 – Managed objects conveying the list of destinations . 15
– 4 – IEC 62379-5-1:2014  IEC 2014 INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
COMMON CONTROL INTERFACE FOR NETWORKED
DIGITAL AUDIO AND VIDEO PRODUCTS –
Part 5-1: Transmission over networks –
General
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this
...