iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 125401:1991

(Main)

Blank Detail Specification: Adjusters used with magnetic oxide (ferrite) cores for use in inductors and tuned transformers

Blank Detail Specification: Adjusters used with magnetic oxide (ferrite) cores for use in inductors and tuned transformers

Supersedes CECC 25 401 Issue 1:1982

Vordruck für Bauartspezifikation: Abgleiche für Kerne aus magnetischen Oxiden (Ferriten) in Spulen und abgestimmten Übertragen

Spécification particulière cadre: Bâtonnets de réglage employés avec des noyaux en oxydes magnétiques (ferrites) destinés aux bobines d'inductance et transformateurs accordés

Blank detail specification: Adjusters used with magnetic oxide cores for use in inductors and tuned transformers

General Information

Status
Withdrawn
Publication Date
14-Dec-1991
Technical Committee
CLC/SR 51 - Magnetic components and ferrite materials
Drafting Committee
IEC/TC 51 - IEC_TC_51
Parallel Committee
IEC/TC 51 - IEC_TC_51
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
02-Nov-2023
Completion Date
02-Nov-2023
Ref Project
SIST EN 125401:2002 - Blank Detail Specification: Adjusters used with magnetic oxide (ferrite) cores for use in inductors and tuned transformers

Buy Standard

EN 125401:2002EN 125401:2002
PreviousNext
Standard
EN 125401:2002
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Blank detail specification: Adjusters used with magnetic oxide cores for use in inductors and tuned transformersVordruck für Bauartspezifikation: Abgleiche für Kerne aus magnetischen Oxiden (Ferriten) in Spulen und abgestimmten ÜbertragenSpécification particulière cadre: Bâtonnets de réglage employés avec des noyaux en oxydes magnétiques (ferrites) destinés aux bobines d'inductan
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60269-1:2025(Main)
Low-voltage fuses - Part 1: General requirements
SIST EN 60269-1:2007/kprA3:2024

IEC 60269-1:2024 is available as IEC 60269-1:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60269-1:2024 is applicable to fuses incorporating enclosed current-limiting fuse-links with rated breaking capacities of not less than 6 kA, intended for protecting power-frequency AC circuits of nominal voltages not exceeding 1 000 V or DC circuits of nominal voltages not exceeding 1 500 V.

  • Draft
    88 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60204-1:2018/A1:2025(Amendment)
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
SIST EN 60204-1:2018/oprA1:2021

Not available

  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62391-2:2025(Main)
Fixed electric double-layer capacitors for use in electronic equipment - Part 2: Sectional specification - Electric double-layer capacitors for power application
SIST EN IEC 62391-2:2025

IEC 62391-2:2025 applies to electric double-layer capacitors for power application. Electric double-layer capacitors for power are intended for applications that require discharge currents in the range from mA to A. The characteristics of the capacitors include such performance as relatively high capacitance and low internal resistance, which is applicable to Class 3 and Class 5 of the measurement classification specified in IEC 62391-1:2022. The object of this document is to specify preferred ratings and characteristics and to select from IEC 62391-1:2022 the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of capacitor. Test severities and requirements specified in detail specifications referring to this document provide specific test severities and requirements of an equal or higher performance level. The definition of power density and its calculating procedure can be found in Annex A. This edition includes the following significant technical changes with respect to the previous edition: a) the document has been completely restructured to comply with the ISO/IEC Directives, Part 2; b) introduction of a new technical categorization for the test methods; c) reorganization of the test methods have been according to these new categories; d) revision of the tables, figures and references according to changes.

  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61557-9:2025(Main)
Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems
SIST EN IEC 61557-9:2025

IEC 61557-9:2023 specifies the requirements for the insulation fault location system (IFLS) that localizes insulation faults in any part of the system in unearthed IT AC systems and unearthed IT AC systems with galvanically connected DC circuits having nominal voltages up to 1 000 V AC, as well as in unearthed IT DC systems with voltages up to 1 500 V DC, independent of the measuring principle. IEC 61557-9:2023 cancels and replaces the third edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) new terms and definitions on maximum admissible locating AC and DC currents and voltages; b) the requirements on locating current and locating voltage have been revised; c) performance requirements have been added; d) the test requirements for locating current and locating voltage have been revised; e) the structure of this document has been adapted to that of IEC 61557-1:2019; f) the limit values under Clause A.2 were adapted to fit the changed test methods in 6.2.3.

  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62657-2:2025(Main)
Industrial networks - Coexistence of wireless systems - Part 2: Coexistence management
kSIST FprEN IEC 62657-2:2025

IEC 62657-2:2025 specifies: – the fundamental assumptions, concepts, parameters, and procedures for wireless communication coexistence; – specifies coexistence parameters and how they are used in an application requiring wireless coexistence; – provides guidelines, requirements, and best practices for wireless communication's availability and performance in an industrial automation plant; it covers the life‑cycle of wireless communication coexistence; – helps the work of all persons involved with the relevant responsibilities to cope with the critical aspects at each phase of life-cycle of the wireless communication coexistence management in an industrial automation plant. Life-cycle aspects include: planning, design, installation, implementation, operation, maintenance, administration and training; – provides a common point of reference for wireless communication coexistence for industrial automation sites as a homogeneous guideline to help the users assess and gauge their plant efforts; – deals with the operational aspects of wireless communication coexistence regarding both the static human/tool-organization and the dynamic network self-organization. This document provides a major contribution to national and regional regulations by supporting to fulfil the requirements using coexistence management. This edition includes the following significant technical changes with respect to the previous edition: a) alignment of some definitions and specifications of coexistence parameters in order to facilitate their future inclusion in the IEC Common Data Dictionary (IEC CDD) maintained by the IEC; b) alignment of some definitions and specifications to be consistent with the new IEC 62657-3 and IEC 62657-4; c) edition 3 of this document was published in June 2022. Some comments were made in the last development stages of this document asking for explanations on how the parts of the IEC 62657 series were structured and how they were related to each other. Resolution of these comments was deferred until a next edition, which means this edition.

  • Draft
    114 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63563-6:2025(Main)
Qi Specification version 2.0 - Part 6: Communications Protocol
oSIST prEN IEC 63563-6:2024

IEC 63563-6:2025 defines the messaging between a Power Transmitter and a Power Receiver. The primary purpose of this messaging is to set up and control the power transfer. As a secondary purpose, it provides a transport mechanism for higher-level applications such as Authentication. The communications protocol comprises both the required order and timing relations of successive messages.

  • Draft
    139 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63563-5:2025(Main)
Qi Specification version 2.0 - Part 5: Communications Physical Layer
oSIST prEN IEC 63563-5:2024

IEC 63563-5:2025 defines the low-level (physical layer and the data link layer) formats of data bits, data bytes, and data packets. In addition, it provides requirements and guidelines for load modulation and frequency-shift keying.

  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63461:2024/AC:2025-03(Corrigendum)
Pelton hydraulic turbines - Model acceptance tests
SIST EN IEC 63461:2024/AC:2025
  • Corrigendum
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63563-1:2025(Main)
Qi Specification version 2.0 - Part 1: Introduction
kSIST FprEN IEC 63563-1:2025

IEC 63563-1:2025 introduces the Qi Specification, which applies to flat surface devices such as mobile phones and tablets that use up to 15 W of power

  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63563-3:2025(Main)
Qi Specification version 2.0 - Part 3: Mechanical, Thermal, and User Interface
oSIST prEN IEC 63563-3:2024

IEC 63563-3:2025 identifies basic physical design requirements and guidelines for Power Transmitter and Power Receiver Products, including product and system dimensions, alignment of the products, surface temperature rise, and indications to the user.

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day