EN IEC 55015:2019

SLOVENSKI STANDARD
01-november-2019
Nadomešča:
SIST EN 55015:2013
SIST EN 55015:2013/A1:2015
Mejne vrednosti in metode merjenja karakteristik občutljivosti za radijske motnje
električne razsvetljave in podobne opreme
Limits and methods of measurement of radio disturbance characteristics of electrical
lighting and similar equipment
Grenzwerte und Messverfahren für Funkstörungen von elektrischen
Beleuchtungseinrichtungen und ähnlichen Elektrogeräten
Limites et méthodes de mesure des perturbations radioélectriques produites par les
appareils électriques d'éclairage et les appareils analogues
Ta slovenski standard je istoveten z: EN IEC 55015:2019
ICS:
33.100.10 Emisija Emission
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 55015

NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2019
ICS 33.100.10 Supersedes EN 55015:2013 and all of its amendments
and corrigenda (if any)
English Version
Limits and methods of measurement of radio disturbance
characteristics of electrical lighting and similar equipment
(CISPR 15:2018)
Limites et méthodes de mesure des perturbations Grenzwerte und Messverfahren für Funkstörungen von
radioélectriques produites par les appareils électriques elektrischen Beleuchtungseinrichtungen und ähnlichen
d'éclairage et les appareils analogues Elektrogeräten
(CISPR 15:2018) (CISPR 15:2018)
This European Standard was approved by CENELEC on 2018-06-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 55015:2019 E
European foreword
The text of document CIS/F/733/FDIS, future edition 9 of CISPR 15, prepared by CISPR SC F
"Interference relating to household appliances tools, lighting equipment and similar apparatus" of
CISPR "International special committee on radio interference" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 55015:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-02-29
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-08-30
document have to be withdrawn
This document supersedes EN 55015:2013 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
Endorsement notice
The text of the International Standard CISPR 15:2018 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
CISPR/TR 16-4-3:2004 NOTE Harmonized as EN 55016-4-3 (not modified)
IEC 60155:1993 NOTE Harmonized as EN 60155:1995 (not modified)
IEC 60155:1993/A1:1995 NOTE Harmonized as EN 60155:1995/A1:1995 (not modified)
IEC 60155:1993/A2:2006 NOTE Harmonized as EN 60155:1995/A2:2007 (not modified)
IEC 61000-6-3:2006 NOTE Harmonized as EN 61000-6-3:2007 (not modified)
IEC 61000-6-3:2006/A1:2010  NOTE  Harmonized as EN 61000-6-3:2007/A1:2011 (not modified)
IEC 61347-1:2015 NOTE Harmonized as EN 61347-1:2015 (not modified)
IEC 62776:2014 NOTE Harmonized as EN 62776:2015 (not modified)

To be published. Stage at the time of publication: prEN 55016-4-3:2018
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60038 -  IEC standard voltages EN 60038 -
IEC 60050-161 -  International Electrotechnical Vocabulary. - -
Chapter 161: Electromagnetic compatibility
IEC 60050-845 1987 International Electrotechnical Vocabulary. - -
Lighting
IEC 60061-1 -  Lamp caps and holders together with EN 60061-1 -
gauges for the control ofinterchangeability
and safety. Part 1: Lamp caps
IEC 60081 -  Double-capped fluorescent lamps - EN 60081 -
Performance specifications
IEC 60598-1 (mod) 2014 Luminaires - Part 1: General requirements EN 60598-1 2015
and tests
+ A1 2017  + A1 2018
IEC 60921 -  Ballasts for tubular fluorescent lamps - EN 60921 -
Performance requirements
IEC 61000-4-20 2010 Electromagnetic compatibility (EMC) - Part EN 61000-4-20 2010
4-20: Testing and measurement
techniques - Emission and immunity
testing in transverse electromagnetic
(TEM) waveguides
IEC 61195 -  Double-capped fluorescent lamps - Safety EN 61195 -
specifications
IEC 62504 2014 General lighting - Light emitting diode EN 62504 2014
(LED) products and related equipment -
Terms and definitions
Publication Year Title EN/HD Year
CISPR 16-1-1 2015 Specification for radio disturbance and - -
immunity measuring apparatus and
methods - Part 1-1: Radio disturbance and
immunity measuring apparatus -
Measuring apparatus
CISPR 16-1-2 2014 Specification for radio disturbance and EN 55016-1-2 2014
immunity measuring apparatus and
methods - Part 1-2: Radio disturbance and
immunity measuring apparatus - Coupling
devices for conducted disturbance
measurements
CISPR 16-1-4 2010 Specification for radio disturbance and EN 55016-1-4 2010
immunity measuring apparatus and
methods - Part 1-4: Radio disturbance and
immunity measuring apparatus - Antennas
and test sites for radiated disturbance
measurements
+ A1 2012  + A1 2012
+ A2 2017  + A2 2017
CISPR 16-2-1 2014 Specification for radio disturbance and EN 55016-2-1 2014
immunity measuring apparatus and
methods - Part 2-1: Methods of
measurement of disturbances and
immunity - Conducted disturbance
measurements
+ A1 2017  + A1 2017
CISPR 16-2-3 2016 Specification for radio disturbance and EN 55016-2-3 2017
immunity measuring apparatus and
methods - Part 2-3: Methods of
measurement of disturbances and
immunity - Radiated disturbance
measurements
CISPR 16-4-2 2011 Specification for radio disturbance and EN 55016-4-2 2011
immunity measuring apparatus and
methods - Part 4-2: Uncertainties, statistics
and limit modelling - Measurement
instrumentation uncertainty
+ A1 2014  + A1 2014
CISPR/TR 30-1 2012 Test method on electromagnetic emissions - -
- Part 1: Electronic control gear for single-
and double-capped fluorescent lamps
CISPR 32 2015 Electromagnetic compatibility of multimedia EN 55032 2015
equipment - Emission requirements
ISO/IEC 17025 2005 General requirements for the competence - -
of testing and calibration laboratories

CISPR 15 ®
Edition 9.0 2018-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
INT ERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE

C OMITÉ INTERNATIONAL SPÉCIAL DES PERTURBATIONS RADIOÉLECTRIQUES

Limits and methods of measurement of radio disturbance characteristics of

electrical lighting and similar equipment

Limites et méthodes de mesure des perturbations radioélectriques produites

par les appareils électriques d'éclairage et les appareils analogues

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.100.10 ISBN 978-2-8322-5648-0

– 2 – CISPR 15:2018 © IEC 2018
CONTENTS
FOREWORD . 7
1 Scope . 9
2 Normative references . 10
3 Terms, definitions and abbreviated terms . 11
3.1 General . 11
3.2 General terms and definitions . 11
3.3 Terms and definitions related to equipment . 12
3.4 Terms and definitions related to interfaces and ports . 16
3.5 Abbreviated terms . 18
4 Limits . 20
4.1 General . 20
4.2 Frequency ranges . 20
4.3 Limits and methods for the assessment of wired network ports . 21
4.3.1 Electric power supply interface . 21
4.3.2 Wired network interfaces other than power supply . 21
4.4 Limits and methods for the assessment of local wired ports . 22
4.5 Limits and methods for the assessment of the enclosure port . 23
4.5.1 General . 23
4.5.2 Frequency range 9 kHz to 30 MHz . 23
4.5.3 Frequency range 30 MHz to 1 GHz . 24
5 Application of the limits . 25
5.1 General . 25
5.2 Identification of the interfaces subject to test . 25
5.3 Application of limits to the interfaces . 26
5.3.1 General . 26
5.3.2 Conducted disturbance requirements for the wired network port . 26
5.3.3 Conducted disturbance requirements for local wired ports . 26
5.3.4 Radiated disturbance requirements for the enclosure port . 26
5.3.5 Multiple interfaces of the same type . 27
5.3.6 Interfaces that can be categorised as multiple types of ports . 27
6 Product specific limit application requirements. 28
6.1 General . 28
6.2 Passive EUT . 28
6.3 Rope lights . 28
6.3.1 General . 28
6.3.2 Requirements for rope lights . 28
6.4 Modules . 28
6.4.1 General .
...