EN 140101:2008

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Blank Detail Specification: Fixed low power film resistorsSpécification particulière: Résistances fixes à couche et à faible dissipationVordruck für die Bauartspezifikation: Schicht-Festwiderstände niedriger Belastbarkeit31.040.10Fiksni uporFixed resistorsICS:SIST EN 140101:2008en,fr,deTa slovenski standard je istoveten z:EN 140101:200801-junij-2008SIST EN 140101:2008SLOVENSKI
STANDARDSIST EN 140101:20021DGRPHãþD

EUROPEAN STANDARD EN 140101 NORME EUROPÉENNE
EUROPÄISCHE NORM March 2008
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 140101:2008 E
ICS 31.040.10 Supersedes EN 140101:1996
English version
Blank Detail Specification:
Fixed low power film resistors
Spécification particulière:
Résistances fixes à couche
et à faible dissipation
Vordruck für die Bauartspezifikation: Schicht-Festwiderstände niedriger Belastbarkeit
This European Standard was approved by CENELEC on 2007-11-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.

The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 140101 on 2007-11-01. This European Standard supersedes EN 140101:1996. The following dates were fixed: – latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement
(dop)
2008-11-01 – latest date by which the national standards conflicting with the EN have to be withdrawn
(dow)
2010-11-01 Preceding documents on the subject covered by this specification have been: − CECC 40 101:1981. Compared to the superseded standard, the following changes have been implemented: − modification of the title; − introduction of a test on the resistance to electrostatic discharge (ESD) in 1.6 and in Annex A; − introduction of description and test methods for lead-free soldering in 1.9.3 and in Annex A; − introduction of code letters for the temperature coefficient (TCR) as in EN 60062; − revision of ordering information in 1.8.4; − adoption of the IECQ rules of procedure, IEC QC 001002-3; − revision of the sample quantities and the sequence of tests in Annex A; − editorial revision.
This specification supports the building of a series of documents describing fixed low power film resistors as follows: − EN 60115-1 Fixed resistors for use in electronic equipment – Part 1: Generic specification
(IEC 60115-1, mod.) − EN 140100 Sectional specification: Fixed low power film resistors − EN 140101-xxx Relevant detail specification(s) written on the basis of this Blank Detail Specification. __________

– 3 – EN 140101:2008 Contents Introduction . 4 1 Characteristics and ratings . 5 1.1 Dimensions and ratings . 5 1.2 Derating curve . 6 1.3 Resistance range and tolerance on rated resistance . 7 1.4 Variation of resistance with temperature and temperature rise . 8 1.5 Climatic categories . 8 1.6 Limits for change of resistance at tests . 9 1.7 Non-linear properties . 9 1.8 Tests related to soldering . 10 1.9 Marking, packaging and ordering designation . 11 1.10 Additional information (not for inspection purpose) . 12 2 Quality assessment procedures . 13 2.1 General . 13 2.2 Qualification Approval . 14 2.3 Quality Conformance Inspection . 14 Annex A (normative)
Fixed sample size Qualification Approval and Quality Conformance Inspection test schedule for fixed low power film resistors . 16 Annex B (informative)
Letter symbols and abbreviations . 24 Bibliography . 26 Figure 1 – Outline and dimensions (see Table 1) . 5 Figure 2 – Derating curve . 6 Figure 3 – Limits of non-linearity in resistance . 10 Table 1 – Style and dimensions . 5 Table 2a – Ratings . 6 Table 2b – Ratings for 0 Ω resistors . 6 Table 3a – Resistance range and tolerance on rated resistance for Version A . 7 Table 3b – Resistance range and tolerance on rated resistance for Version E . 7 Table 4 – Temperature coefficients and percentage change of resistance . 8 Table 5 – Limit of temperature rise . 8 Table 6 – Climatic categories . 8 Table 7a – Limits for change of resistance at tests . 9 Table 7b – Limits for change of resistance at tests . 9 Table A.1 – Test schedule for Qualification Approval and Quality Conformance Inspection,
lot-by-lot tests, assessment level EZ . 16 Table A.2 – Test schedule for Qualification Approval and Quality Conformance Inspection,
periodic tests, assessment level EZ . 19

– 5 – EN 140101:2008 Specification available from:
[1] CENELEC Central Secretariat, Rue de Stassart 35 B-1050 Brussels, or from the addresses shown on the inside cover EN 140101
[2]Electronic components of assessed quality in accordance with: [3] EN 60115-1:2001 + A1:2001 EN 140100:2008 Issue 2 [4] March 2008
[7] Other shapes are permitted within the given dimensions. Figure 1 – Outline and dimensions (see Table 1) Fixed low power film resistors [5] (Description of the component) [6] Assessment level EZ a [8] Version A: with 100 %-test Version E: with failure rate level and 100 %-test Stability classes … a For explanation on assessment level EZ see 2.1.1. NOTE Version E is optional. 1 Characteristics and ratings Various parameters of this component are precisely defined in this specification. Unspecified parameters may vary from one component to another. 1.1 Dimensions and ratings Table 1 – Style and dimensions Style Length L mm Diameter D mm d a mm e b mm c c mm Mass dmg Code x min. max. min. max.
max. max.
a Permissible tolerance according to HD 349. b Standard distance for the axis to bent leads. Smaller modules may be agreed between manufacturer and customer. c Length of excess protective coating. d For information only. x Optional column for additional information (e.g. size code). NOTE See EN 140100:2008, 1.2 b). Information about manufacturers who have components qualified to this detail specification is available in the approvals section of the website http://www.iecq.org.

x Optional column for additional information (e.g. stability class, rated dissipation at other ambient temperature than 70 °C) NOTE 1
See EN 140100:2008, 1.2 h), i), j). NOTE 2
Should it be necessary to control further parameters, a more detailed specification should be used. Then the additional test method(s) shall be fully described and appropriate limits and inspection levels (IL) shall be specified. Table 2b – Ratings for 0 Ω resistors Style Maximum current Imax A Maximum resistance Rr max mΩ Insulation voltage d.c. or a.c. (peak) Uins V 1 min continuous
NOTE
Table 2b is optional.
1.2 Derating curve Resistors covered by this specification are derated according to the following diagram: Ambient temperature ϑaPercentage of rated dissipation0 %60 %40 %20 %100 %80 %70 °CLower category temperature (LCT)Upper category temperature (UCT) Figure 2 – Derating curve
NOTE 1 See EN 140100:2008, 1.2 h). NOTE 2 A larger area of operation may be given in the detail specification, provided it includes all the area given above.

– 7 – EN 140101:2008 1.3 Resistance range and tolerance on rated resistance 1.3.1 Version A The following combinations of temperature coefficient and tolerance on rated resistance may be approved only. Products from this extent shall be used for the Qualification approval according to 2.2.1 and for the Quality conformance inspection according to 2.3. Resistance values of an E-series according to IEC 60063 shall be used.
The qualification of resistance values below or beyond the specified resista
...