EN 61326-2-1:2013

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.3UHVNXVQHRPDJQHWQLPElektrische Mess-, Steuer-, Regel- und Laborgeräte – EMV-Anforderungen – Teil 2-1: Besondere Anforderungen - Prüfanordnung, Betriebsbedingungen und Leistungsmerkmale für empfindliche Prüf- und Messgeräte für Anwendungen ohne EMV-Schutzmaßnahmen (IEC 61326-2-1:2012Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications (IEC 61326-2-1:2012)01-marec-2013SIST EN 61326-2-1:2013SLOVENSKI
STANDARDSIST EN 61326-2-1:20071DGRPHãþD

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM - Partie 2-1: Exigences particulières - Configurations d'essai, conditions fonctionnelles et critères de performance pour essai de sensibilité et équipement de mesures pour les applications non protégées de la CEM (CEI 61326-2-1:201233.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general19.080SUHVNXãDQMHElectrical and electronic testingICS:SIST EN 61326-2-1:2013enTa slovenski standard je istoveten z:EN 61326-2-1:2013SIST EN 61326-2-1:2013

EUROPEAN STANDARD EN 61326-2-1 NORME EUROPÉENNE
EUROPÄISCHE NORM January 2013
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61326-2-1:2013 E
ICS 17.220; 25.040.40; 33.100 Supersedes EN 61326-2-1:2006
English version
Electrical equipment for measurement, control and laboratory use -
EMC requirements -
Part 2-1: Particular requirements -
Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications (IEC 61326-2-1:2012)
Matériel électrique de mesure, de commande et de laboratoire -
Exigences relatives à la CEM -
Partie 2-1: Exigences particulières -
Configurations d'essai, conditions fonctionnelles et critères de performance pour essai de sensibilité et équipement de mesures pour les applications non protégées de la CEM (CEI 61326-2-1:2012)
Elektrische Mess-, Steuer-, Regel- und Laborgeräte – EMV-Anforderungen – Teil 2-1: Besondere Anforderungen – Prüfanordnung, Betriebsbedingungen und Leistungsmerkmale für empfindliche Prüf- und Messgeräte für Anwendungen ohne EMV-Schutzmaßnahmen (IEC 61326-2-1:2012)
This European Standard was approved by CENELEC on 2012-11-06. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Foreword The text of document 65A/641/FDIS, future edition 2 of IEC 61326-2-1, prepared by SC 65A, "System aspects", of IEC TC 65, "Industrial-process measurement, control and automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61326-2-1:2013.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-08-06 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-11-06
This document supersedes EN 61326-2-1:2006. EN 61326-2-1:2013 includes the following significant technical changes with respect to EN 61326-2-1:2006: – Update with respect to EN 61326-1:2013. EN 61326-2-1:2013 is to be used in conjunction with EN 61326-1:2013 and follows the same numbering of clauses, subclauses, tables and figures. When a particular subclause of EN 61326-1 is not mentioned in this part, that subclause applies as far as is reasonable. When this standard states “addition”, “modification” or “replacement”, the relevant text in EN 61326-1 is to be adapted accordingly. NOTE The following numbering system is used: – subclauses, tables and figures that are numbered starting from 101 are additional to those in EN 61326-1; – unless notes are in a new subclause or involve notes in EN 61326-1, they are numbered starting from 101 including those in a replaced clause or subclause; – additional annexes are lettered AA, BB, etc.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this document.
Endorsement notice The text of the International Standard IEC 61326-2-1:2012 was approved by CENELEC as a European Standard without any modification. SIST EN 61326-2-1:2013

- 3 - EN 61326-2-1:2013
Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Annex ZA of EN 61326-1:2013 applies, except as follows:
Publication Year Title EN/HD Year
Addition:
IEC 61326-1 2012 Electrical equipment for measurement,
control and laboratory use -
EMC requirements -
Part 1: General requirements EN 61326-1 2013
Annex ZZ (informative)
Coverage of Essential Requirements of EU Directives This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and within its scope the standard covers protection requirements of Annex I, Article 1 of the EC Directive 2004/108/EC. Compliance with this standard provides one means of conformity with the specified essential requirements of the Directive[s] concerned. NOTE Other requirements and other EU Directives may be applicable to the products falling within the scope of this standard.
IEC 61326-2-1 Edition 2.0 2012-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Electrical equipment for measurement, control and laboratory use – EMC requirements –
Part 2-1: Particular requirements – Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
Matériel électrique de mesure, de commande et de laboratoire – Exigences relatives à la CEM –
Partie 2-1: Exigences particulières – Configurations d'essai, conditions fonctionnelles et critères de performance pour essai de sensibilité et équipement de mesure pour les applications non protégées de la CEM
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE H ICS 17.220; 25.040.40; 33.100 PRICE CODE CODE PRIX ISBN 978-2-83220-390-3
– 2 – 61326-2-1 © IEC:2012 CONTENTS FOREWORD . 3 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 4 General . 5 5 EMC test plan . 5 5.1 General . 5 5.2 Configuration of EUT during testing . 6 5.3 Operation conditions of EUT during testing . 6 5.4 Specification of functional performance . 7 5.5 Test description . 7 6 Immunity requirements . 7 6.1 Conditions during the tests . 7 6.2 Immunity test requirements . 7 6.3 Random aspects. 7 6.4 Performance criteria . 7 7 Emission requirements . 7 8 Test results and test report . 7 9 Instructions for use . 7
61326-2-1 © IEC:2012 – 3 – INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
ELECTRICAL EQUIPMENT FOR MEASUREMENT,
CONTROL AND LABORATORY USE –
EMC REQUIREMENTS
...