Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-3: Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity

EN 50267-2-3 specifies the test method and procedure for the determination of the degree of acidity of gases evolved during the combustion of electric or optical cables by determination of the weighted average of pH and conductivity of the constituent maetrials. Note: the relevant cable standard should indicate which materials from the cable should be tested.

Allgemeine Prüfverfahren für das Verhalten von Kabeln und isolierten Leitungen im Brandfall - Prüfung der bei der Verbrennung der Werkstoffe von Kabeln und isolierten Leitungen entstehenden Gase - Teil 2-3: Prüfverfahren - Bestimmung des Grades der Azidität der wesentlichen Werkstoffe von Kabeln durch die Bestimmung eines gewichteten Mittelwertes von pH-Wert und Leitfähigkeit

Méthodes d'essai communes aux câbles soumis au feu - Essais sur les gaz émis lors de la combustion d'un matériau prélevé sur un câble - Partie 2-3: Procédures - Détermination de l'acidité des gaz des câbles par une mesure de la moyenne pondérée du pH et de la conductivité

Splošne metode za preskušanje kablov v požarnih razmerah - Preskušanje nastajanja plinov pri gorenju kabelskih materialov - 2-3. del: Postopki - Ugotavljanje stopnje kislosti plinov za kable z določanjem tehtane srednje vrednosti pH in prevodnosti

General Information

Status
Withdrawn
Publication Date
16-Jun-1998
Withdrawal Date
29-Feb-2000
Technical Committee
CLC/TC 20 - Electric cables
Drafting Committee
IEC/TC 20 - IEC_TC_20
Parallel Committee
IEC/TC 20 - IEC_TC_20
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
27-Jan-2017
Completion Date
27-Jan-2017

Relations

Effective Date
28-Jan-2023
Effective Date
28-Jan-2023
Effective Date
28-Jan-2023

Get Certified

Connect with accredited certification bodies for this standard

NSF International

Global independent organization facilitating standards development and certification.

ANAB United States Verified

UL Solutions

Global safety science company with testing, inspection and certification.

ANAB United States Verified

CEPREI Certification Center (Guangzhou Saibao)

Pioneer of third-party certification, subsidiary of Electronic Fifth Research Institute.

CNAS China Verified

Sponsored listings

Frequently Asked Questions

EN 50267-2-3:1998 is a standard published by CLC. Its full title is "Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-3: Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity". This standard covers: EN 50267-2-3 specifies the test method and procedure for the determination of the degree of acidity of gases evolved during the combustion of electric or optical cables by determination of the weighted average of pH and conductivity of the constituent maetrials. Note: the relevant cable standard should indicate which materials from the cable should be tested.

EN 50267-2-3 specifies the test method and procedure for the determination of the degree of acidity of gases evolved during the combustion of electric or optical cables by determination of the weighted average of pH and conductivity of the constituent maetrials. Note: the relevant cable standard should indicate which materials from the cable should be tested.

EN 50267-2-3:1998 is classified under the following ICS (International Classification for Standards) categories: 13.220.40 - Ignitability and burning behaviour of materials and products; 29.060.20 - Cables. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 50267-2-3:1998 has the following relationships with other standards: It is inter standard links to HD 602 S1:1992, EN 60754-1:2014, EN 60754-2:2014. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 50267-2-3:1998 is associated with the following European legislation: EU Directives/Regulations: 2006/95/EC, 2014/35/EU, 73/23/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

EN 50267-2-3:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-1999
1DGRPHãþD
SIST HD 602 S1:1998
6SORãQHPHWRGH]DSUHVNXãDQMHNDEORYYSRåDUQLKUD]PHUDK3UHVNXãDQMH
QDVWDMDQMDSOLQRYSULJRUHQMXNDEHOVNLKPDWHULDORYGHO3RVWRSNL
8JRWDYOMDQMHVWRSQMHNLVORVWLSOLQRY]DNDEOH]GRORþDQMHPWHKWDQHVUHGQMH
YUHGQRVWLS+LQSUHYRGQRVWL
Common test methods for cables under fire conditions - Tests on gases evolved during
combustion of materials from cables - Part 2-3: Procedures - Determination of degree of
acidity of gases for cables by determination of the weighted average of pH and
conductivity
Allgemeine Prüfverfahren für das Verhalten von Kabeln und isolierten Leitungen im
Brandfall - Prüfung der bei der Verbrennung der Werkstoffe von Kabeln und isolierten
Leitungen entstehenden Gase - Teil 2-3: Prüfverfahren - Bestimmung des Grades der
Azidität der wesentlichen Werkstoffe von Kabeln durch die Bestimmung eines
gewichteten Mittelwertes von pH-Wert und Leitfähigkeit
Méthodes d'essai communes aux câbles soumis au feu - Essais sur les gaz émis lors de
la combustion d'un matériau prélevé sur un câble - Partie 2-3: Procédures -
Détermination de l'acidité des gaz des câbles par
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...