EN 60966-2-7:2016

SLOVENSKI STANDARD
01-april-2016
6HVWDYLUDGLRIUHNYHQþQLKLQNRDNVLDOQLKNDEORYGHO3RGUREQDVSHFLILNDFLMD
NDEHOVNLKVHVWDYRY]DUDGLMVNHLQWHOHYL]LMVNHVSUHMHPQLNH)UHNYHQþQRREPRþMH
RG0+]GR0+]NRQHNWRUMLSR,(&,(&
Radio frequency and coaxial cable asemblies - Part 2-7: Detail specification for cable
assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC
61169-47 connectors (IEC 60966-2-7:2015)
Ta slovenski standard je istoveten z: EN 60966-2-7:2016
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60966-2-7

NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2016
ICS 33.120.10
English Version
Radio frequency and coaxial cable assemblies - Part 2-7: Detail
specification for cable assemblies for radio and TV receivers -
Frequency range 0 MHz to 3 000 MHz, IEC 61169-47
connectors
(IEC 60966-2-7:2015)
Ensembles de cordons coaxiaux et de cordons pour Konfektionierte Koaxial- und Hochfrequenzkabel - Teil 2-7:
fréquences radioélectriques - Partie 2-7: Spécification Bauartspezifikation für konfektionierte Kabel für Ton- und
particulière pour cordons de connexion de récepteurs radio Fernsehrundfunkempfänger - Frequenzbereich 0 MHz bis 3
ou TV - Bande de fréquences de 0 MHz à 3 000 MHz, 000 MHz, Steckverbinder nach IEC 61169-47
connecteurs IEC 61169-47 (IEC 60966-2-7:2015)
(IEC 60966-2-7:2015)
This European Standard was approved by CENELEC on 2015-10-13. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60966-2-7:2016 E
European foreword
The text of document 46/530/FDIS, future edition 1 of IEC 60966-2-7, prepared by IEC/TC 46 "Cables,
wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60966-2-7:2016.

The following dates are fixed:
(dop) 2016-07-22
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2019-01-22
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60966-2-7:2015 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD

applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60966-1 1999 Radio frequency and coaxial cable EN 60966-1 1999
assemblies -- Part 1: Generic specification
- General requirements and test methods
IEC 60966-2-1 2008 Radio frequency and coaxial cable EN 60966-2-1 2009
assemblies -- Part 2-1: Sectional
specification for flexible coaxial cable
assemblies
IEC 60966-2-2 2003 Radio frequency and coaxial cable EN 60966-2-2 2003
assemblies -- Part 2-2: Blank detail
specification for flexible coaxial cable
assemblies
IEC 61169-47 -  RADIO-FREQUENCY CONNECTORS - EN 61169-47 -
part 47: Sectional specification for radio-
frequency coaxial connectors with clamp
coupling, typically for use in 75 Ω cable
networks (type F-Quick)
IEC 61196-6 -  Coaxial communication cables - Part 6: - -
Sectional specification for CATV drop
cables
IEC 61196-7 -  Coaxial communication cables - Part 7: - -
Sectional specification for cables for BCT
cabling in accordance with ISO/IEC 15018
- Indoor drop cables for systems operating
at 5 MHz - 3 000 MHz
IEC 62153-4-7 -  Metallic communication cable test methods EN 62153-4-7 -
-- Part 4-7: Electromagnetic compatibility
(EMC) - Test method for measuring the
transfer impedance and the screening - or
coupling attenuation - Tube in tube method

IEC 60966-2-7 ®
Edition 1.0 2015-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Radio frequency and coaxial cable assemblies –

Part 2-7: Detail specification for cable assemblies for radio and TV receivers –

Frequency range 0 MHz to 3 000 MHz, IEC 61169-47 connectors

Ensembles de cordons coaxiaux et de cordons pour fréquences radioélectriques –

Partie 2-7: Spécification particulière pour cordons de connexion de récepteurs

radio ou TV – Bande de fréquences de 0 MHz à 3 000 MHz, connecteurs

IEC 61169-47
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.120.10 ISBN 978-2-8322-2894-4

– 2 – IEC 60966-2-7:2015 © IEC 2015
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES –

Part 2-7: Detail specification for cable assemblies for radio and
TV receivers – Frequency range 0 MHz to 3 000 MHz,
IEC 61169-47 connectors
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation f
...