EN 61315:1997
(Main)Calibration of fibre optic power meters
Calibration of fibre optic power meters
Fibre optic power meters are designed to measure optical power from fibre optic sources as accurately as possible. This capability depends largely on the quality of the calibration process. This International Standard standardizes all of the steps involved in the calibration process: establishing the reference conditions, carrying out the calibration, calculating the uncertainty, and reporting the uncertainty, the reference conditions, and the traceability. It also creates a standardized type of power meter specification, which will make it easier to compare power meters from different vendors.
Kalibrierung von Lichtwellenleiter-Leistungsmessern
Etalonnage des radiomètres pour sources fibrées
Les radiomètres pour sources fibrées sont conçus pour mesurer la puissance rayonnante de sources fibrées de manière aussi précise que possible. Cette capacité dépend surtout du processus d'étalonnage. La présente Norme internationale a pour objet la standardization de toutes les étapes du processus d'étalonnage: établissement des conditions de référence, réalisation de l'étalonnage, calcul de l'incertitude et rapport de l'incertitude, des conditions de référence et de la traçabilité. Un autre but important est de créer un type standardisé de spécifications des radiomètres, qui faciliteront la comparaison entre les radiomètres des différents vendeurs.
Calibration of fibre optic power meters (IEC 61315:1995)
General Information
- Status
- Withdrawn
- Publication Date
- 25-May-1997
- Drafting Committee
- IEC/TC 86 - IEC_TC_86
- Parallel Committee
- IEC/TC 86 - IEC_TC_86
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Nov-2008
- Completion Date
- 01-Nov-2008
Relations
- Effective Date
- 28-Jan-2023
- Refers
EN 61040:1992 - Power and energy measuring detectors, instruments and equipment for laser radiation - Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
Get Certified
Connect with accredited certification bodies for this standard
TL 9000 QuEST Forum
Telecommunications quality management system.
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
Sponsored listings
Frequently Asked Questions
EN 61315:1997 is a standard published by CLC. Its full title is "Calibration of fibre optic power meters". This standard covers: Fibre optic power meters are designed to measure optical power from fibre optic sources as accurately as possible. This capability depends largely on the quality of the calibration process. This International Standard standardizes all of the steps involved in the calibration process: establishing the reference conditions, carrying out the calibration, calculating the uncertainty, and reporting the uncertainty, the reference conditions, and the traceability. It also creates a standardized type of power meter specification, which will make it easier to compare power meters from different vendors.
Fibre optic power meters are designed to measure optical power from fibre optic sources as accurately as possible. This capability depends largely on the quality of the calibration process. This International Standard standardizes all of the steps involved in the calibration process: establishing the reference conditions, carrying out the calibration, calculating the uncertainty, and reporting the uncertainty, the reference conditions, and the traceability. It also creates a standardized type of power meter specification, which will make it easier to compare power meters from different vendors.
EN 61315:1997 is classified under the following ICS (International Classification for Standards) categories: 33.140 - Special measuring equipment for use in telecommunications; 33.180.01 - Fibre optic systems in general. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 61315:1997 has the following relationships with other standards: It is inter standard links to EN 61315:2006, EN 61040:1992, EN 61300-1:1997, EN 61300-1:2003, EN 61280-4-2:1999, EN 62150-1:2005. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 61315:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-1999
Calibration of fibre optic power meters (IEC 61315:1995)
Calibration of fibre optic power meters (IEC 61315:1995)
Kalibrierung von Lichtwellenleiter-Leistungsmessern
Etalonnage des radiomètres pour sources fibrées
Ta slovenski standard je istoveten z: EN 61315:1997
ICS:
33.140 Posebna merilna oprema za Special measuring
uporabo v telekomunikacijah equipment for use in
telecommunications
33.180.10 2SWLþQD YODNQDLQNDEOL Fibres and cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...