FprEN 50617-1:2023
(Main)Railway applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 1: Track circuits
Railway applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 1: Track circuits
This European Standard specifies the technical parameters of track circuits associated with the disturbing current emissions limits for RST in the context of interoperability defined in the form of Frequency Management. The limits for compatibility between rolling stock and track circuits currently proposed in this standard allow provision for known interference phenomena linked to traction power supply and associated protection (over voltage, short-circuit current and basic transient effects like inrush current and power cut-off). These effects are assessed using modelling tools that have been verified by the past European research project RAILCOM. This European Standard is intended to be used to assess compliance of track circuits equipment and other forms of train detection systems using the rails as part of their detection principles, in the context of the Interoperability Directive and the associated technical specification for interoperability relating to the control-command and signalling track-side subsystems. The European Standard describes technical parameters to consider for achieving the compatibility of the track circuit with the emissions limits defined in the frequency management for rolling stock. These parameters are structured and allocated according to their basic references as follows: - Technical track circuit parameters - Train based parameters - Track based parameters - Environmental and other parameters including EMC Each parameter is defined by a short general description, the definition of the requirement, the relation to other standards and a procedure to show the fulfilment of the requirement as far as necessary. An overview on the safety relevance of each parameter is given in the context of this European Standard in a separate table. NOTE The allocated bands for track circuits and emission limits for rolling stock defined in the Frequency Management are currently used as input information to define mandatory requirements to be stated in index 77 of CCS TSI. The evaluation is conducted by the European Railway Agency. The immunity limits of the track circuits installed on non-interoperable lines, or on interoperable lines built before the publication date of this document, are not defined in this European Standard and remain the responsibility of individual infrastructure managers, NSAs and/or suppliers of train detection systems. In this case, the limits for compatibility are usually given in the infrastructure registers and/or the notified national rules. This European Standard is applicable to track circuit installed on all traction power supply lines, including non-electrified lines. However, for track circuit intended to be installed only on non-electrified lines, some parameters may be not applicable.
Bahnanwendungen - Technische Parameter von Gleisfreimeldesystemen für die Interoperabilität des transeuropäischen Eisenbahnsystems - Teil 1: Gleisstromkreise
Applications ferroviaires - Paramètres techniques des systèmes de détection des trains pour lInteropérabilité du système ferroviaire transeuropéen - Partie 1: Circuits de voie
Železniške naprave - Tehnični parametri sistemov za ugotavljanje lokacije vlakov, ki zagotavljajo medobratovalnost vseevropskega železniškega sistema - 1. del: Tirni tokokrog
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 50617-1:2022
01-marec-2022
Železniške naprave - Tehnični parametri sistemov za ugotavljanje lokacije vlakov,
ki zagotavljajo medobratovalnost vseevropskega železniškega sistema - 1. del:
Tirni tokokrog
Railway applications - Technical parameters of train detection systems for the
interoperability of the trans-European railway system - Part 1: Track circuits
Bahnanwendungen - Technische Parameter von Gleisfreimeldesystemen für die
Interoperabilität des transeuropäischen Eisenbahnsystems - Teil 1: Gleisstromkreise
Applications ferroviaires - Paramètres techniques des systèmes de détection des trains
pour lInteropérabilité du système ferroviaire transeuropéen - Partie 1: Circuits de voie
Ta slovenski standard je istoveten z: prEN 50617-1
ICS:
45.020 Železniška tehnika na Railway engineering in
splošno general
oSIST prEN 50617-1:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 50617-1:2022
---------------------- Page: 2 ----------------------
oSIST prEN 50617-1:2022
EUROPEAN STANDARD DRAFT
prEN 50617-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2022
ICS 29.260.99 Will supersede EN 50617-1:2015 and all of its
amendments and corrigenda (if any)
English Version
Railway applications - Technical parameters of train detection
systems for the interoperability of the trans-European railway
system - Part 1: Track circuits
Applications ferroviaires - Paramètres techniques des Bahnanwendungen - Technische Parameter von
systèmes de détection des trains pour l¿Interopérabilité du Gleisfreimeldesystemen für die Interoperabilität des
système ferroviaire transeuropéen - Partie 1: Circuits de transeuropäischen Eisenbahnsystems - Teil 1:
voie Gleisstromkreise
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2022-04-29.
It has been drawn up by CLC/SC 9XA.
If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 71560 Ref. No. prEN 50617-1 E
---------------------- Page: 3 ----------------------
oSIST prEN 50617-1:2022
prEN 50617-1:2022 (E)
Contents Page
Foreword 4
Introduction 6
1 Scope 7
2 Normative references 7
3 Terms, definitions and abbreviations 8
3.1 Terms and definitions 8
3.2 Abbreviations . 10
4 Description of train detection system 11
5 Safety relevance of parameters 13
6 Technical track circuit parameters 13
6.1 Dynamic shunt impedance . 13
6.1.1 General . 13
6.1.2 Requirements . 14
6.2 TC non-detection zone . 14
6.2.1 General .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.