Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests

IEC 61486-1:2020 specifies general requirements for the design, construction and testing of non-contact electro-sensitive protective equipment (ESPE) designed specifically to detect persons or part of a person as part of a safety-related system. Special attention is directed to functional and design requirements that ensure an appropriate safety-related performance is achieved. An ESPE can include optional safety-related functions, the requirements for which are given in Annex A. This document is intended to be used with a subsequent part of IEC 61496 that provides particular requirements based on the sensing technology. Where a part covering the sensing technology does not exist, IEC TS 62998-1 is used. Where the IEC 61496 series does not contain all necessary provisions, IEC TS 62998-1 is used. It is an additional possibility to combine those aspects covered by the IEC 61496 series in addition to IEC TS 62998-1. This document does not specify the dimensions or configuration of the detection zone and its disposition in relation to hazards in any particular application, nor what constitutes a hazardous state of any machine. It is restricted to the functioning of the ESPE and how it interfaces with the machine. While a data interface can be used to control optional safety-related ESPE functions (Annex A), this document does not provide specific requirements. Requirements for these safety-related functions can be determined by consulting other standards (for example, IEC 61508 (all parts), IEC TS 62046, IEC 62061, and ISO 13849-1). This document can be relevant to applications other than those for the protection of persons, for example for the protection of machinery or products from mechanical damage. In those applications, different requirements can be appropriate, for example when the materials that have to be recognized by the sensing function have different properties from those of persons. This document does not deal with requirements for ESPE functions not related to the protection of persons (e.g. using sensing unit data for navigation). This document does not deal with electromagnetic compatibility (EMC) emission requirements. IEC 61486-1:2020 cancels and replaces the third edition published in 2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) It has been clarified that some requirements for ESPEs that are dependent on sensing technology are not included in IEC 61496-1. They are provided in a subsequent part of IEC 61496. b) Requirements for protection against environmental influences from subsequent parts of IEC 61496 that are common to all ESPEs have been consolidated into IEC 61496-1. c) Some test procedures in IEC 61496-1 were incomplete. They have been expanded with more detail and step by step procedures. d) Some requirements and procedures in IEC 61496-1 are now covered by new generic machine safety standards. The requirements in IEC 61496-1 have been harmonized with references to the new generic standards.

Sicherheit von Maschinen - Berührungslos wirkende Schutzeinrichtungen - Teil 1: Allgemeine Anforderungen und Prüfungen

Sécurité des machines - Équipements de protection électrosensibles - Partie 1: Exigences générales et essais

L'IEC 61496-1:2020 définit les exigences générales de conception, de construction et d'essai des équipements de protection électrosensibles (ESPE) sans contact spécifiquement conçus pour détecter des personnes au sein d’un système relatif à la sécurité. Une attention particulière est accordée aux exigences de fonctionnement et de conception assurant la satisfaction aux performances relatives à la sécurité appropriées. Un ESPE peut proposer des fonctions facultatives liées à la sécurité: les exigences relatives à celles-ci sont données à l’Annexe A. L'IEC 61496-1:2020 est destiné à être utilisé avec une partie ultérieure de l’IEC 61496 qui définit des exigences particulières en fonction de la technologie de détection. En l’absence d’une partie couvrant la technologie de détection, l’IEC TS 62998-1 est utilisée. Dans le cas où la série IEC 61496 ne contient pas toutes les dispositions nécessaires, l’IEC TS 62998-1 est utilisée. Il est en outre possible de combiner ces aspects couverts par la série IEC 61496 à l’IEC TS 62998-1. Le présent document ne spécifie ni les dimensions ou la configuration de la zone de détection, ni sa disposition par rapport aux dangers dans toute application particulière, ni ce qui constitue un état dangereux pour toute machine donnée. Il se limite au fonctionnement de l’ESPE et à son interface avec la machine. Bien qu’une interface de données puisse être utilisée pour commander des fonctions de l'ESPE relatives à la sécurité facultatives (Annexe A), le présent document ne fournit pas d’exigences particulières. Les exigences liées à ces fonctions relatives à la sécurité peuvent être déterminées en consultant d'autres normes (par exemple, l'IEC 61508 (toutes les parties), l’IEC 62046, l’IEC 62061, et l'ISO 13849-1). Le présent document peut être pertinent pour des applications autres que la protection des personnes, par exemple la protection des machines ou des produits contre des dommages mécaniques. Dans ces applications, des exigences différentes peuvent être nécessaires, par exemple lorsque les matériaux qui doivent être reconnus par le dispositif de détection ont des caractéristiques différentes de celles des personnes. Le présent document ne traite pas des exigences relatives aux fonctions de l’ESPE non liées à la protection des personnes (en utilisant, par exemple, les données de l’élément de détection en matière de navigation). Le présent document ne traite pas des exigences d’émission relatives à la compatibilité électromagnétique (CEM). L'IEC 61496-1:2020 annule et remplace la troisième édition parue en 2012. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: a) Il a été défini que certaines exigences relatives aux ESPE dépendant de la technologie de détection n’étaient pas incluses dans l’IEC 61496-1. Ces exigences sont fournies dans une partie ultérieure de l’IEC 61496. b) Les exigences de protection contre les influences environnementales issues des parties ultérieures de l’IEC 61496 et qui sont communes à tous les ESPE ont été consolidées dans l’IEC 61496-1. c) Certaines procédures d’essai de l’IEC 61496-1 étaient incomplètes. Elles ont été enrichies par des procédures plus détaillées et étape par étape. d) Certaines exigences et procédures de l’IEC 61496-1 sont désormais couvertes par de nouvelles normes génériques relatives à la sécurité des machines. Les exigences de l’IEC 61496-1 ont été harmonisées avec des références à ces nouvelles norme

Varnost strojev - Električno občutljiva zaščitna oprema - 1. del: Splošne zahteve in preskusi (IEC 61496-1:2020)

General Information

Status
Published
Publication Date
24-Sep-2020
Current Stage
6060 - Document made available - Publishing
Start Date
25-Sep-2020
Completion Date
25-Sep-2020

Relations

Buy Standard

Standard
EN IEC 61496-1:2020
English language
63 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2020
Nadomešča:
SIST EN 61496-1:2014
SIST EN 61496-1:2014/AC:2015
Varnost strojev - Električno občutljiva zaščitna oprema - 1. del: Splošne zahteve in
preskusi (IEC 61496-1:2020)
Safety of machinery - Electro-sensitive protective equipment - Part 1: General
requirements and tests (IEC 61496-1:2020)
Sicherheit von Maschinen - Berührungslos wirkende Schutzeinrichtungen - Teil 1:
Allgemeine Anforderungen und Prüfungen (IEC 61496-1:2020)
Sécurité des machines - Equipements de protection électro-sensibles - Partie 1:
Exigences générales et essais (IEC 61496-1:2020)
Ta slovenski standard je istoveten z: EN IEC 61496-1:2020
ICS:
13.110 Varnost strojev Safety of machinery
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61496-1

NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2020
ICS 13.110; 29.260.99 Supersedes EN 61496-1:2013 and all of its amendments
and corrigenda (if any)
English Version
Safety of machinery - Electro-sensitive protective equipment -
Part 1: General requirements and tests
(IEC 61496-1:2020)
Sécurité des machines - Équipements de protection Sicherheit von Maschinen - Berührungslos wirkende
électrosensibles - Partie 1: Exigences générales et essais Schutzeinrichtungen - Teil 1: Allgemeine Anforderungen
(IEC 61496-1:2020) und Prüfungen
(IEC 61496-1:2020)
This European Standard was approved by CENELEC on 2020-08-18. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61496-1:2020 E

European foreword
The text of document 44/874/FDIS, future edition 4 of IEC 61496-1, prepared by IEC/TC 44 "Safety of
machinery - Electrotechnical aspects" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN IEC 61496-1:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-05-18
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-08-18
document have to be withdrawn
This document supersedes EN 61496-1:2013 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 61496-1:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60447 NOTE Harmonized as EN 60447
IEC 60812 NOTE Harmonized as EN IEC 60812
IEC 61000-6-2 NOTE Harmonized as EN IEC 61000-6-2
IEC 61000-6-7:2014 NOTE Harmonized as EN 61000-6-7:2015 (not modified)
IEC 61010-1 NOTE Harmonized as EN 61010-1
IEC 61025 NOTE Harmonized as EN 61025
IEC 61131-2:2017 NOTE Harmonized as EN 61131-2:2017 (not modified)
IEC 62046 NOTE Harmonized as EN IEC 62046

To be published. Stage at the time of publication: EN 61131-2:2017.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2-6 - Environmental testing - Part 2-6: Tests - EN 60068-2-6 -
Test Fc: Vibration (sinusoidal)
IEC 60068-2-27 - Environmental testing - Part 2-27: Tests - EN 60068-2-27 -
Test Ea and guidance: Shock
IEC 60204-1 (mod) 2016 Safety of machinery - Electrical EN 60204-1 2018
equipment of machines - Part 1: General
requirements
IEC 60417 - Graphical symbols for use on equipment. - -
Index, survey and compilation of the
single sheets.
IEC 60445 - Basic and safety principles for man- - -
machine interface, marking and
identification - Identification of equipment
terminals, conductor terminations and
conductors
IEC 60529 - Degrees of protection provided by - -
enclosures (IP Code)
IEC 60721-3-5 - Classification of environmental conditions EN 60721-3-5 -
- Part 3: Classificationof groups of
environmental parameters and their
severities - Section 5: Ground vehicle
installations
Publication Year Title EN/HD Year
IEC/TR 60721-4-3 - Classification of environmental conditions - -
- Part 4-3: Guidance for the correlation
and transformation of environmental
condition classes of IEC 60721-3 to the
environmental tests of IEC 60068 -
Stationary use at weatherprotected
locations
IEC 60947-1 2007 Low-voltage switchgear and controlgear - EN 60947-1 2007
Part 1: General rules
+ A2 2014 + A2 2014
IEC 61000-4-2 2008 Electromagnetic compatibility (EMC) - EN 61000-4-2 2009
Part 4-2: Testing and measurement
techniques - Electrostatic discharge
immunity test
IEC 61000-4-3 2006 Electromagnetic compatibility (EMC) - EN 61000-4-3 2006
Part 4-3 : Testing and measurement
techniques - Radiated, radio-frequency,
electromagnetic field immunity test
+ A1 2007 + A1 2008
+ A2 2010 + A2 2010
IEC 61000-4-4 2012 Electromagnetic compatibility (EMC) - EN 61000-4-4 2012
Part 4-4: Testing and measurement
techniques - Electrical fast transient/burst
immunity test
IEC 61000-4-5 2014 Electromagnetic compatibility (EMC) - EN 61000-4-5 2014
Part 4-5: Testing and measurement
techniques - Surge immunity test
+ A1 2017 + A1 2017
IEC 61000-4-6 2013 Electromagnetic compatibility (EMC) - EN 61000-4-6 2014
Part 4-6: Testing and measurement
techniques - Immunity to conducted
disturbances, induced by radio-frequency
fields
IEC 61000-4-11 2020 Electromagnetic compatibility (EMC) - EN IEC 61000-4-11 2020
Part 4-11: Testing and measurement
techniques - Voltage dips, short
interruptions and voltage variations
immunity tests for equipment with input
current up to 16 A per phase
IEC 61000-4-29 2000 Electromagnetic compatibility (EMC) - EN 61000-4-29 2000
Part 4-29: Testing and measurement
techniques - Voltage dips, short
interruptions and voltage variations on
d.c. input power port immunity tests
Publication Year Title EN/HD Year
IEC 61508 series Functional safety of EN 61508 series
electrical/electronic/programmable
electronic safety-related systems
IEC 62061 - Safety of machinery - Functional safety of - -
safety-related control systems
ISO 12100 - Safety of machinery - General principles EN ISO 12100 -
for design - Risk assessment and risk
reduction
ISO 13849-1 - Safety of machinery - Safety-related parts EN ISO 13849-1 -
of control systems - Part 1: General
principles for design
ISO 13849-2 2012 Safety of machinery - Safety-related parts EN ISO 13849-2 2012
of control systems - Part 2: Validation

IEC 61496-1 ®
Edition 4.0 2020-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Safety of machinery – Electro-sensitive protective equipment –

Part 1: General requirements and tests

Sécurité des machines – Équipements de protection électrosensibles –

Partie 1: Exigences générales et essais

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.110; 29.260.99 ISBN 978-2-8322-8435-3

– 2 – IEC 61496-1:2020 © IEC 2020
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 9
3 Terms and definitions . 10
4 Functional, design and environmental requirements . 14
4.1 Functional requirements . 14
4.1.1 Normal operation . 14
4.1.2 Sensing function . 15
4.1.3 Types of ESPE . 15
4.1.4 Types and required safety performance . 15
4.1.5 Required PL or SIL and corresponding ESPE type . 16
r
4.2 Design requirements . 16
4.2.1 Electrical supply . 16
4.2.2 Fault detection requirements . 17
4.2.3 Electrical equipment of the ESPE. 18
4.2.4 Output signal switching devices (OSSDs) . 19
4.2.5 Indicator lights and displays . 21
4.2.6 Adjustment means . 22
4.2.7 Disconnection of electrical assemblies . 22
4.2.8 Non-electrical components . 22
4.2.9 Common cause failures . 22
4.2.10 Programmable or complex integrated circuits . 22
4.2.11 Software, programming, functional design of integrated circuits . 22
4.2.12 Integrity of the ESPE detection capability. 23
4.2.13 Test piece . 23
4.3 Environmental requirements . 23
4.3.1 Ambient air temperature range and humidity . 23
4.3.2 Electrical disturbances . 23
4.3.3 Mechanical environment . 26
4.3.4 Enclosures . 27
4.3.5 Light interference . 27
5 Testing . 28
5.1 General . 28
5.1.1 Type tests . 28
5.1.2 Test conditions . 29
5.1.3 Test results .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.