EN 60384-18:2007

SLOVENSKI STANDARD
01-januar-2008
)LNVQLNRQGHQ]DWRUML]DXSRUDERYHOHNWURQVNLRSUHPLGHO3RGURþQD
VSHFLILNDFLMD)LNVQLDOXPLQLMVNLHOHNWUROLWVNLNRQGHQ]DWRUMLVWUGLP0Q2LQ
QHWUGLPHOHNWUROLWRP]DSRYUãLQVNRPRQWDåR,(&
Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed
aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid
electrolyte (IEC 60384-18:2007)
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 18:
Rahmenspezifikation - Oberlfächenmontierbare Aluminium-Elektrolyt-Kondensatoren mit
festen (MnO2) und flüssigen Elektrolyten (IEC 60384-18:2007)
Condensateurs fixes utilisés dans les équipements électroniques - Partie 18:
Spécification intermédiaire - Condensateurs fixes électrolytiques en aluminium pour
montage en surface a électrolyte solide (MnO2) et non solide (IEC 60384-18:2007)
Ta slovenski standard je istoveten z: EN 60384-18:2007
ICS:
31.060.50 Aluminijski elektrolitni Aluminium electrolytic
kondenzatorji capacitors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60384-18
NORME EUROPÉENNE
May 2007
EUROPÄISCHE NORM
ICS 31.060.50
English version
Fixed capacitors for use in electronic equipment -
Part 18: Sectional specification -
Fixed aluminium electrolytic surface mount capacitors
with solid (MnO ) and non-solid electrolyte
(IEC 60384-18:2007)
Condensateurs fixes utilisés  Festkondensatoren zur Verwendung
dans les équipements électroniques - in Geräten der Elektronik -
Partie 18: Spécification intermédiaire - Teil 18: Rahmenspezifikation -
Condensateurs fixes électrolytiques Oberlfächenmontierbare
en aluminium pour montage en surface Aluminium-Elektrolyt-Kondensatoren
à électrolyte solide (MnO ) et non solide mit festen (MnO )
2 2
(CEI 60384-18:2007) und flüssigen Elektrolyten
(IEC 60384-18:2007)
This European Standard was approved by CENELEC on 2007-04-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60384-18:2007 E
Foreword
The text of document 40/1764/CDV, future edition 2 of IEC 60384-18, prepared by IEC TC 40, Capacitors
and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel Unique Acceptance
Procedure and was approved by CENELEC as EN 60384-18 on 2007-04-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-04-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60384-18:2007 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60384-18:2007
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

1)
IEC 60063 - Preferred number series for resistors and - -
capacitors
1) 2)
IEC 60068-1 - Environmental testing - EN 60068-1 1994
Part 1: General and guidance
IEC 60068-2-58 2004 Environmental testing - EN 60068-2-58 2004
Part 2-58: Tests - Test Td: Test methods for + corr. December 2004
solderability, resistance to dissolution of
metallization and to soldering heat of surface
mounting devices (SMD)
IEC 60384-1 (mod) 1999 Fixed capacitors for use in electronic EN 60384-1 2001
equipment - + corr. October 2001
Part 1: Generic specification
1) 2)
IEC 60384-18-1 - Fixed capacitors for use in electronic EN 60384-18-1 2007
equipment -
Part 18-1: Blank detail specification - Fixed
aluminium electrolytic surface mount
capacitors with solid (MnO ) electrolyte -
Assessment level EZ
1) 2)
IEC 60384-18-2 - Fixed capacitors for use in electronic EN 60384-18-2 2007
equipment -
Part 18-2: Blank detail specification - Fixed
aluminium electrolytic surface mount
capacitors with non-solid electrolyte -
Assessment level EZ
1)
IEC 60410 - Sampling plans and procedures for inspection - -
by attributes
1)
ISO 3 - Preferred numbers - Series of preferred - -
numbers
1)
Undated reference.
2)
Valid edition at date of issue.

INTERNATIONAL IEC
STANDARD 60384-18
QC 302300
Second edition
2007-03
Fixed capacitors for use in electronic equipment –
Part 18:
Sectional specification –
Fixed aluminium electrolytic surface
mount capacitors with solid (MnO )
and non-solid electrolyte
© IEC 2007 ⎯ Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale U
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

– 2 – 60384-18 © IEC:2007(E)
CONTENTS
FOREWORD.4

General .6
1.1 Scope.6
1.2 Object .6
1.3 Normative references .6
1.4 Information to be given in a detail specification .7
1.5 Terms and definitions .8
1.6 Marking .8
2 Preferred ratings and characteristics.9
2.1 Preferred characteristics.9
2.2 Preferred values of ratings.9
3 Quality assessment procedures .10
3.1 Primary stage of manufacture .10
3.2 Structurally similar components .10
3.3 Certified records of released lots .10
3.4 Qualification approval procedures .10
3.5 Quality Conformance Inspection .21
4 Test and measurement procedures .23
4.1 Drying.23
4.2 Measuring conditions .23
4.3 Mounting .23
4.4 Visual examination and check of dimensions.23
4.5 Electrical tests .23
4.6 Resistance to soldering heat.25
4.7 Solderability.25
4.8 Shear test.25
4.9 Substrate bending test.25
4.10 Rapid change of temperature.26
4.11 Climatic sequence .26
4.12 Damp heat, steady state .26
4.13 Characteristics at high and low temperature.27
4.14 Surge .27
4.15 Endurance.27
4.16 Reverse voltage (if required by the detail specification) .28
4.17 Storage at high temperature .28
4.18 Storage at low temperature (for non-solid electrolyte capacitors only).29
4.19 Charge and discharge (if required by the detail specification) .29
4.20 Component solvent resistance (if applicable) .29
4.21 Solvent resistance of the marking (if applicable).29
4.22 High surge current (for solid electrolyte capacitors only and if required by the
detail specification).30

60384-18 © IEC:2007(E) – 3 –
Table 1 – Category voltages .10
Table 2 – Sampling plan for qualification approval, assessment level EZ.12
Table 3 – Test schedule for qualification approval .13
Table 4 – Lot-by-lot inspection.22
Table 5 – Periodic inspection.22

– 4 – 60384-18 © IEC:2007(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –

Part 18: Sectional specification –
Fixed aluminium electrolytic surface mount capacitors
with solid (MnO ) and non-solid electrolyte
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to
...