EN 60384-18:2016
(Main)Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte
Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte
IEC 60384-18:2007 applies to fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte primarily intended for d.c. applications for use in electronic equipment. It prescribes preferred ratings and characteristics and to select from IEC 60384-1 the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of capacitor. Test severities and requirements prescribed in detail specifications referring to this sectional specification should be of equal or higher performance level, because lower performance levels are not permitted. This second edition cancels and replaces the first edition published in 1993 and its Amendment 1 (1998). This edition constitutes a minor revision related to tables, figures and references.
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 18: Rahmenspezifikation - Oberflächenmontierbare Aluminium-Elektrolyt-Kondensatoren mit festen (MnO2) und flüssigen Elektrolyten
Condensateurs fixes utilisés dans les équipements électroniques - Partie 18: Spécification intermédiaire - Condensateurs fixes électrolytiques à l’aluminium pour montage en surface à électrolyte solide (MnO2) et non solide
L'IEC 60384-18:2016 s'applique aux condensateurs fixes électrolytiques à l'aluminium pour montage en surface à électrolyte solide (MnO2) et à électrolyte non solide destinés principalement aux applications en courant continu dans des équipements électroniques. La présente norme a pour objet de prescrire les valeurs assignées et caractéristiques préférentielles et de sélectionner, en se référant à l'IEC 60384-1:2016, les procédures d'assurance de la qualité appropriées, les essais et les méthodes de mesure et de donner les exigences de performances générales pour ce type de condensateur. Il convient que les sévérités et les exigences d'essai prescrites dans les spécifications particulières faisant référence à la présente spécification intermédiaire présentent des niveaux de performances supérieurs ou égaux, parce que les niveaux de performance inférieurs ne sont pas autorisés. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) Révision de la structure fondé sur les Directives ISO/IEC, Partie 2:2011 (sixième édition) dans la mesure du possible, et harmonisation avec d'autres types de documents similaires. b) En outre, révision et de l'Article 4 et des tableaux pour éviter les redondances et les contradictions.
Nespremenljivi kondenzatorji za uporabo v elektronski opremi - 18. del: Področna specifikacija - Nespremenljivi aluminijski elektrolitski kondenzatorji s trdim (MnO2) in netrdim elektrolitom za površinsko montažo (IEC 60384-18:2016)
IEC 60384-18:2007 se uporablja za nespremenljive aluminijske elektrolitske kondenzatorje s trdim (MnO2) in netrdnim elektrolitom za površinsko montažo, ki so namenjeni predvsem za uporabo enosmernega toka v elektronski opremi. Namen tega standarda je predpisati prednostne nazivne vrednosti in lastnosti, izbrati primerne postopke za oceno kakovosti, preskuse in merilne metode iz standarda IEC 60384-1 ter podati splošne zahteve glede zmogljivosti za ta tip kondenzatorja. Preskusne stopnje in zahteve, predpisane v podrobnih specifikacijah, ki se navezujejo na to področno specifikacijo, morajo biti enake ali višje ravni učinkovitosti, kajti nižje ravni niso dovoljene. Druga izdaja razveljavlja in nadomešča prvo izdajo, objavljeno leta 1993, in njeno dopolnilo 1 (1998). Ta izdaja vključuje manjše popravke, povezane s preglednicami, slikami in referencami.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2016
1DGRPHãþD
SIST EN 60384-18:2008
1HVSUHPHQOMLYLNRQGHQ]DWRUML]DXSRUDERYHOHNWURQVNLRSUHPLGHO 3RGURþQD
VSHFLILNDFLMD1HVSUHPHQOMLYLDOXPLQLMVNLHOHNWUROLWVNLNRQGHQ]DWRUMLVWUGLP 0Q2
LQQHWUGLPHOHNWUROLWRP]DSRYUãLQVNRPRQWDåR ,(&
Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed
aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid
electrolyte (IEC 60384-18:2016)
Ta slovenski standard je istoveten z: EN 60384-18:2016
ICS:
31.060.50 Aluminijski elektrolitni Aluminium electrolytic
kondenzatorji capacitors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 60384-18
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2016
ICS 31.060.50 Supersedes EN 60384-18:2007
English Version
Fixed capacitors for use in electronic equipment - Part 18:
Sectional specification - Fixed aluminium electrolytic surface
mount capacitors with solid (MnO2) and non-solid electrolyte
(IEC 60384-18:2016)
Condensateurs fixes utilisés dans les équipements Festkondensatoren zur Verwendung in Geräten der
électroniques - Partie 18: Spécification intermédiaire - Elektronik - Teil 18: Rahmenspezifikation -
Condensateurs fixes électrolytiques à l'aluminium pour Oberflächenmontierbare Aluminium-Elektrolyt-
montage en surface à électrolyte solide (MnO2) et non Kondensatoren mit festen (MnO2) und flüssigen
solide Elektrolyten
(IEC 60384-18:2016) (IEC 60384-18:2016)
This European Standard was approved by CENELEC on 2016-06-29. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60384-18:2016 E
European foreword
The text of document 40/2460/FDIS, future edition 3 of IEC 60384-18, prepared by
IEC/TC 40 "Capacitors and resistors for electronic equipment" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 60384-18:2016.
The following dates are fixed:
(dop) 2017-03-29
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2019-06-29
standards conflicting with the
document have to be withdrawn
This document supersedes EN 60384-18:2007.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60384-18:2016 was approved by CENELEC as a European
Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60063 - Preferred number series for resistors and EN 60063 -
capacitors
IEC 60068-1 2013 Environmental testing -- Part 1: General EN 60068-1 2014
and guidance
IEC 60068-2-58 2015 Environmental testing - Part 2-58: Tests - EN 60068-2-58 2015
Test Td: Test methods for solderability,
resistance to dissolution of metallization
and to soldering heat of surface mounting
devices (SMD)
IEC 60384-1 2016 Fixed capacitors for use in electronic EN 60384-1 2016
equipment - Part 1: Generic specification
IEC 60417 - Graphical symbols for use on equipment. - -
Index, survey and compilation of the single
sheets.
IEC 61193-2 2007 Quality assessment systems -- Part 2: EN 61193-2 2007
Selection and use of sampling plans for
inspection of electronic components and
packages
ISO 3 - Preferred numbers; Series of preferred - -
numbers
IEC 60384-18 ®
Edition 3.0 2016-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fixed capacitors for use in electronic equipment –
Part 18: Sectional specification – Fixed aluminium electrolytic surface mount
capacitors with solid (MnO ) and non-solid electrolyte
Condensateurs fixes utilisés dans les équipements électroniques –
Partie 18: Spécification intermédiaire – Condensateurs fixes électrolytiques à
l’aluminium pour montage en surface à électrolyte solide (MnO ) et non solide
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.060.50 ISBN 978-2-8322-3423-5
– 2 – IEC 60384-18:2016 © IEC 2016
CONTENTS
FOREWORD .5
1 General .7
1.1 Scope .7
1.2 Object .7
1.3 Normative references .7
1.4 Information to be given in a detail specification .8
1.4.1 General .8
1.4.2 Outline drawing and dimensions .8
1.4.3 Mounting .8
1.4.4 Ratings and characteristics .8
1.4.5 Marking .9
1.5 Terms and definitions .9
1.6 Marking .9
1.6.1 General .9
1.6.2 Information for marking .9
1.6.3 Marking on capacitors .9
1.6.4 Marking on packaging . 10
2 Preferred ratings and characteristics . 10
2.1 Preferred characteristics . 10
2.2 Preferred values of ratings . 10
2.2.1 Nominal capacitance (C ) . 10
N
2.2.2 Tolerance on nominal capacitance . 10
2.2.3 Rated voltage (U ) . 10
R
2.2.4 Category voltage (U ) . 10
C
2.2.5 Surge voltage . 11
2.2.6 Rated temperature . 11
3 Quality assessment procedures . 11
3.1 Primary stage of manufacture . 11
3.2 Structurally similar components . 11
3.3 Certified test records of released lots . 11
3.4 Qualification approval procedures . 11
3.4.1 General . 11
3.4.2 Qualification approval on the basis of the fixed sample size procedure . 11
3.4.3 Tests . 12
3.5 Quality conformance inspection . 22
3.5.1 Formation of inspection lots . 22
3.5.2 Test schedule . 22
3.5.3 Delayed delivery . 22
3.5.4 Assessment levels . 22
4 Test and measurement procedures . 23
4.1 Drying . 23
4.2 Measuring conditions . 24
4.3 Mounting . 24
4.3.1 General . 24
4.3.2 Initial inspections . 24
4.3.3 Test conditions . 24
IEC 60384-18:2016 © IEC 2016 – 3 –
4.3.4 Final inspections . 24
4.4 Visual examination and check of dimensions . 24
4.4.1 General . 24
4.4.2 Visual examination and check of dimensions . 24
4.4.3 Requirements . 24
4.5 Electrical tests . 24
4.5.1 Leakage current . 24
4.5.2 Capacitance . 25
4.5.3 Tangent of loss angle (tan δ) or equivalent series resistance (ESR) . 25
4.5.4 Impedance (if required) . 26
4.6 Resistance to soldering heat . 26
4.6.1 General . 26
4.6.2 Test conditions . 26
4.6.3 Recovery . 26
4.6.4 Final inspections and requirements . 26
4.7 Solderability . 26
4.7.1 Genera
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.