EN 62282-3-200:2012

SLOVENSKI STANDARD
01-marec-2012
7HKQRORJLMHJRULYQLKFHOLFGHO1HSUHPLþQLHOHNWURHQHUJHWVNLVLVWHPL]
JRULYQLPLFHOLFDPL3UHVNXVQHPHWRGH]PRJOMLYRVWL
Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test
methods
Brennstoffzellentechnologien - Teil 3-200: Stationäre Brennstoffzellen-Energiesysteme -
Leistungskennwerteprüfverfahren
Technologies des piles à combustible - Partie 3-200: Systèmes à piles à combustible
stationnaires - Méthodes d'essai des performances
Ta slovenski standard je istoveten z: EN 62282-3-200:2012
ICS:
27.070 Gorilne celice Fuel cells
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62282-3-200
NORME EUROPÉENNE
January 2012
EUROPÄISCHE NORM
ICS 27.070 Supersedes EN 62282-3-2:2006

English version
Fuel cell technologies -
Part 3-200: Stationary fuel cell power systems -
Performance test methods
(IEC 62282-3-200:2011)
Technologies des piles à combustible - Brennstoffzellentechnologien -
Partie 3-200: Systèmes à piles à Teil 3-2: Stationäre Brennstoffzellen-
combustible stationnaires - Energiesysteme -
Méthodes d'essai des performances Leistungskennwerteprüfverfahren
(CEI 62282-3-200:2011) (IEC 62282-3-200:2011)

This European Standard was approved by CENELEC on 2011-11-23. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62282-3-200:2012 E

Foreword
The text of document 105/340/FDIS, future edition 1 of IEC 62282-3-200, prepared by IEC/TC 105 "Fuel
cell technologies" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
(dop) 2012-08-23
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2014-11-23
standards conflicting with the
document have to be withdrawn
This document supersedes EN 62282-3-2:2006.
The principal changes in EN 62282-3-200:2012 as compared with EN 62282-3-2:2006 aim to harmonize
with ASME PTC-50. They are as follows:
– the equations for efficiency calculation are changed from power-base to average powerbase, which is
obtained by dividing energy by test duration;
– the duration of the test and frequency of reading are changed;
– the efficiency test at partial load is no longer mandatory. Whether or not to conduct the test at partial
load should be determined by the parties conducting the tests;
– the flow rate measurement method is modified. Both mass flow rate and volume flow rate are used for
calculations of efficiency;
– the thermal energy input and mechanical energy input are incorporated into efficiency calculations.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 62282-3-200:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
ISO 6976:1995 NOTE  Harmonized as EN ISO 6976:2005 (not modified).
+ corrigendum 1:1997
+ corrigendum 2:1997
+ corrigendum 3:1999
ISO 8041 NOTE  Harmonized as EN ISO 8041.

- 3 - EN 62282-3-200:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60051 Series Direct acting indicating analogue electrical EN 60051 Series
measuring instruments and their accessories

IEC 60359 - Electrical and electronic measurement EN 60359 -
equipment - Expression of performance

IEC 60688 - Electrical measuring transducers for EN 60688 -
converting a.c. electrical quantities to
analogue or digital signals
IEC 61000-4-7 - Electromagnetic compatibility (EMC) - EN 61000-4-7 -
Part 4-7: Testing and measurement
techniques - General guide on harmonics and
interharmonics measurements and
instrumentation, for power supply systems
and equipment connected thereto

IEC 61000-4-13 - Electromagnetic compatibility (EMC) - EN 61000-4-13 -
Part 4-13: Testing and measurement
techniques - Harmonics and interharmonics
including mains signalling at a.c. power port,
low frequency immunity tests
IEC 61028 - Electrical measuring instruments - X-Y EN 61028 -
recorders
IEC 61143 Series Electrical measuring instruments - X-t EN 61143 Series
recorders
IEC 61672-1 - Electroacoustics - Sound level meters - EN 61672-1 -
Part 1: Specifications
IEC 61672-2 - Electroacoustics - Sound level meters - EN 61672-2 -
Part 2: Pattern evaluation tests

IEC 62052-11 - Electricity metering equipment (AC) - General EN 62052-11 -
requirements, tests and test conditions -
Part 11: Metering equipment
IEC 62053-22 - Electricity metering equipment (a.c.) - EN 62053-22 -
Particular requirements -
Part 22: Static meters for active energy
(classes 0,2 S and 0,5 S)
ISO/IEC Guide 98-3 - Uncertainty of measurement - - -
Part 3: Guide to the expression of uncertainty
in measurement (GUM:1995)
ISO 3648 - Aviation fuels - Estimation of net specific - -
energy
Publication Year Title EN/HD Year
ISO 3744 - Acoustics - Determination of sound power EN ISO 3744 -
levels of noise sources using sound pressure -
Engineering method in an essentially free field
over a reflecting plane
ISO 4677-1 - Atmospheres for conditioning and testing - - -
Determination of relative humidity -
Part 1: Aspirated psychrometer method

ISO 4677-2 - Atmospheres for conditioning and testing - - -
Determination of relative humidity -
Part 2: Whirling psychrometer method

ISO 5167 Series Measurement of fluid flow by means of EN ISO 5167 Series
pressure differential devices inserted in
circular cross-section conduits running full

ISO 5348 - Mechanical vibration and shock - Mechanical - -
mounting of accelerometers
ISO 6060 - Water quality - Determination of the chemical - -
oxygen demand
ISO 6326 Series Natural gas - Determination of sulfur EN ISO 6326 Series
compounds
ISO 6974 Series Natural gas - Determination of composition EN ISO 6974 Series
with defined uncertainty by gas
chromatography
ISO 6975 Series Natural gas - Extended analysis - Gas- EN ISO 6975 Series
chromatographic method
ISO 7934 - Stationary source emissions - Determination - -
of the mass concentration of sulfur dioxide -
Hydrogen peroxide/barium perchlorate/Thorin
method
ISO 7935 - Stationary source emissions - Determination - -
of the mass concentration of sulfur dioxide -
Performance characteristics of automated
measuring methods
ISO 8217 - Petroleum products - Fuels (class F) - - -
Specifications of marine fuels

ISO 9000 - Quality management systems - Fundamentals EN ISO 9000 -
and vocabulary
ISO 9096 - Stationary source emissions - Manual - -
determination of mass concentration of
particulate matter
ISO 10101 Series Natural gas - Determination of water by the EN ISO 10101 Series
Karl Fischer method
ISO 10396 - Stationary source emissions - Sampling for - -
the automated determination of gas
concentrations
ISO 10523 - Water quality - Determination of pH - -

ISO 10707 - Water quality - Evaluation in an aqueous EN ISO 10707 -
medium of the "ultimate" aerobic
biodegradability of organic compounds -
Method by analysis of biochemical oxygen
demand (closed bottle test)
- 5 - EN 62282-3-200:2012
Publication Year Title EN/HD Year
ISO 10780 - Stationary source emissions - Measurement - -
of velocity and volume flow rate of gas
streams in ducts
ISO 10849 - Stationary source emissions - Determination - -
of the mass concentration of nitrogen oxides -
Performance characteristics of automated
measuring systems
ISO 11042-1 - Gas turbines - Exhaust gas emission - - -
Part 1: Measurement and evaluation

ISO 11042-2 - Gas turbines - Exhaust gas emission - - -
Part 2: Automated emission monitoring

ISO 11541 - Natural gas - Determination of water content EN ISO 11541 -
at high pressure
ISO 11564 - Stationary source emissions - Determination - -
of the mass concentration of nitrogen oxides -
Naphthylethylenediamine photometric method

ISO 14687 - Hydrogen fuel - Product specification - -

ISO/TR 15916 - Basic considerations for the safety of - -
hydrogen systems
ISO 16622 - Meteorology - Sonic - -
anemometers/thermometers - Acceptance test
methods for mean wind measurements

ASTM D4809-00 - Standard Test Method for Heat of Combustion - -
of Liquid Hydrocarbon Fuels by Bomb
Calorimeter (Precision Method)

ASTM F260208e1 - Standard Test Method for Determining the - -
Molar Mass of Chitosan an Chitosan Salts by
Size Exclusion Chromatography with Multi-
angle Light Scattering Detection (SEC-MALS)

ASME PTC 50 - Performance Test Code 50 - Fuel Cell Power - -
Systems Performance
IEC 62282-3-200 ®
Edition 1.0 2011-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Fuel cell technologies –
Part 3-200: Stationary fuel cell power systems – Performance test methods

Technologies des piles à combustible –
Partie 3-200: Systèmes à piles à combustible stationnaires – Méthodes d'essai
des performances
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XC
ICS 27.070 ISBN 978-2-88912-732-0

– 2 – 62282-3-200  IEC:2011
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 9
3 Terms, definitions and symbols . 11
3.1 Terms and definitions . 11
3.2 Symbols . 15
4 Reference conditions . 18
4.1 General . 18
4.2 Temperature and pressure . 18
4.3 Heating value base . 19
5 Item of performance test . 19
6 Test preparation . 19
6.1 General . 19
6.2 Uncertainty analysis . 20
6.2.1 Uncertainty analysis items . 20
6.2.2 Data acquisition plan . 20
7 Measurement instruments and measurement methods . 20
7.1 General . 20
7.2 Measurement instruments . 20
7.3 Measurement methods . 21
7.3.1 Electric power measurements .
...