FprEN IEC 60115-2-10:2025/FprAA:2025
(Amendment)Fixed resistors for use in electronic equipment - Part 2-10: Blank detail specification: Low-power film resistors with leads for through-hole assembly on circuit boards (THT), for general electronic equipment, classification level G
Fixed resistors for use in electronic equipment - Part 2-10: Blank detail specification: Low-power film resistors with leads for through-hole assembly on circuit boards (THT), for general electronic equipment, classification level G
This part of IEC 60115 is applicable to leaded fixed low-power film resistors for use in electronic equipment and is applicable to the drafting of detail specifications for leaded fixed low-power film resistors classified to level G, which is defined in IEC 60115-1:2020, 3.4 for general electronic equipment, typically operated under benign or moderate environmental conditions, where the major requirement is function. Examples for level G include consumer products and telecommunication user terminals. The resistors covered herein are classified to level G, as defined in IEC 60115-1:2020, 3.4 for general electronic equipment, typically operated under benign or moderate environmental conditions, where the major requirement is function. Examples for level G include consumer products and telecommunication user terminals. This detail specification is based upon the blank detail specification IEC 60115-2-10:202X. This detail specification establishes test schedules and performance requirements permitting the quality assessment of the resistors covered herein according to the quality assessment procedures prescribed by IEC 60115-1:2020, Annex Q.
Festwiderstände zur Verwendung in Geräten der Elektronik - Teil 2-10: Vordruck für Bauartspezifikation: Niedrigbelastbare Schichtwiderstände mit Drahtanschlüssen für Durchsteckmontage auf Leiterplatten (THT), für allgemeine Geräte der Elektronik, Klassifikationsstufe G
Résistances fixes utilisées dans les équipements électroniques - Partie 2-10: Spécification particulière-cadre: Résistances à broches à couche, à faible dissipation, pour assemblage par trous traversants sur cartes de circuit imprimé (carte THT) pour des équipements électroniques généraux, niveau de classification G
Stalni upori za elektronsko opremo - 2-10. del: Okvirna podrobna specifikacija: Tankoplastni upori majhne moči z izvodi za montažo skozi prehodne luknje tiskanih vezij, za splošno elektronsko opremo, razvrstilna raven G - Dopolnilo AA
General Information
- Status
- Not Published
- Publication Date
- 19-Feb-2026
- Technical Committee
- CLC/TC 40XB - CLC/TC 40XB
- Current Stage
- 5060 - Voting results sent to TC, SR - Formal Approval
- Start Date
- 26-Dec-2025
- Due Date
- 13-Aug-2025
- Completion Date
- 26-Dec-2025
Relations
- Effective Date
- 17-Oct-2023
Overview
The standard FprEN IEC 60115-2-10:2025/FprAA:2025, developed by CLC/TC 40XB, defines detailed specifications for fixed low-power film resistors with leads, designed for through-hole technology (THT) assembly on circuit boards. These resistors are intended for general electronic equipment categorized under classification level G as per IEC 60115-1:2020. This classification targets devices typically operating under benign or moderate environmental conditions where functional performance is the primary requirement. Consumer electronics and telecommunication terminals are key examples of applications for this standard.
This detail specification, building on the blank detail specification IEC 60115-2-10:202X, establishes essential performance requirements, testing schedules, and quality assessment procedures. It aids manufacturers, designers, and quality assurance teams in ensuring product reliability and compliance with international benchmarks.
Key Topics
Scope and Classification
This standard addresses leaded fixed film resistors specifically designed for THT assembly in general electronic equipment under classification level G. It focuses on low-power resistors where environmental stress is typically moderate.Detail Specification Content
Provides a framework for drafting specific resistor detail specifications including parameters such as resistance tolerance, power rating, temperature coefficient, stability, and termination plating options.Testing and Quality Assessment
The standard prescribes test schedules aligned with IEC 60115-1:2020 Annex Q. Testing includes electrical, mechanical, and environmental reliability checks to assure functional performance.Terminology and Referencing
Incorporates normative references to international and European standards related to resistor marking codes (IEC 60062), preferred number series (IEC 60063), packaging (IEC 60286-1), and quality assessment systems (IEC 61193-2).Amendment Details
The 2025 amendment clarifies titling conventions for detail specifications, adding descriptors for better differentiation in documentation. It modifies related annexes and normative references to ensure alignment with updated European standards.
Applications
The FprEN IEC 60115-2-10 standard is crucial for industries engaged in the design, production, and quality control of resistors used in:
Consumer Electronics
Devices like TVs, set-top boxes, audio systems, and household appliances benefit from reliable low-power THT film resistors assured by this specification.Telecommunication Devices
User terminals, modems, routers, and related telecommunication equipment require stable resistor performance under typical operating conditions covered by classification level G.General Electronic Equipment
Industrial controllers, measurement instruments, and embedded systems where functional reliability under moderate conditions is essential.
The standard supports manufacturers in developing resistors that meet stringent quality and performance criteria while enabling designers to select components aligned with international compliance.
Related Standards
This specification complements a suite of international and European standards, including:
- IEC 60115-1:2020 – Generic specifications for fixed resistors, establishing classification levels including level G.
- IEC 60115-2:2023/prAA:2024 – Sectional specifications for low-power film resistors with leads for THT applications.
- IEC 60062 – Marking codes for resistors and capacitors, essential for consistent resistor identification.
- IEC 60063 – Preferred number series for resistor values, aiding component selection and standardization.
- IEC 60286-1 – Guidelines for packaging of components for automatic handling on continuous tapes.
- IEC 61193-2:2007 – Quality assessment systems including sampling plan selection for electronic components inspection.
These interconnected standards provide a robust framework covering design, functional testing, quality assurance, and handling of resistors in electronic equipment.
Keywords: low-power film resistors, fixed resistors, through-hole technology, THT resistors, electronic equipment resistors, classification level G, resistor quality standards, IEC resistor specifications, general electronic equipment, resistor test schedules, resistor performance requirements.
Frequently Asked Questions
FprEN IEC 60115-2-10:2025/FprAA:2025 is a draft published by CLC. Its full title is "Fixed resistors for use in electronic equipment - Part 2-10: Blank detail specification: Low-power film resistors with leads for through-hole assembly on circuit boards (THT), for general electronic equipment, classification level G". This standard covers: This part of IEC 60115 is applicable to leaded fixed low-power film resistors for use in electronic equipment and is applicable to the drafting of detail specifications for leaded fixed low-power film resistors classified to level G, which is defined in IEC 60115-1:2020, 3.4 for general electronic equipment, typically operated under benign or moderate environmental conditions, where the major requirement is function. Examples for level G include consumer products and telecommunication user terminals. The resistors covered herein are classified to level G, as defined in IEC 60115-1:2020, 3.4 for general electronic equipment, typically operated under benign or moderate environmental conditions, where the major requirement is function. Examples for level G include consumer products and telecommunication user terminals. This detail specification is based upon the blank detail specification IEC 60115-2-10:202X. This detail specification establishes test schedules and performance requirements permitting the quality assessment of the resistors covered herein according to the quality assessment procedures prescribed by IEC 60115-1:2020, Annex Q.
This part of IEC 60115 is applicable to leaded fixed low-power film resistors for use in electronic equipment and is applicable to the drafting of detail specifications for leaded fixed low-power film resistors classified to level G, which is defined in IEC 60115-1:2020, 3.4 for general electronic equipment, typically operated under benign or moderate environmental conditions, where the major requirement is function. Examples for level G include consumer products and telecommunication user terminals. The resistors covered herein are classified to level G, as defined in IEC 60115-1:2020, 3.4 for general electronic equipment, typically operated under benign or moderate environmental conditions, where the major requirement is function. Examples for level G include consumer products and telecommunication user terminals. This detail specification is based upon the blank detail specification IEC 60115-2-10:202X. This detail specification establishes test schedules and performance requirements permitting the quality assessment of the resistors covered herein according to the quality assessment procedures prescribed by IEC 60115-1:2020, Annex Q.
FprEN IEC 60115-2-10:2025/FprAA:2025 is classified under the following ICS (International Classification for Standards) categories: 31.040.10 - Fixed resistors. The ICS classification helps identify the subject area and facilitates finding related standards.
FprEN IEC 60115-2-10:2025/FprAA:2025 has the following relationships with other standards: It is inter standard links to FprEN IEC 60115-2-10:2025. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase FprEN IEC 60115-2-10:2025/FprAA:2025 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 60115-2-10:2024/oprAA:2024
01-december-2024
Stalni upori za elektronsko opremo - 2-10. del: Okvirna podrobna specifikacija:
Tankoplastni upori majhne moči z izvodi za montažo skozi prehodne luknje
tiskanih vezij, za splošno elektronsko opremo, razvrstilna raven G
Fixed resistors for use in electronic equipment - Part 2-10: Blank detail specification:
Low-power film resistors with leads for through-hole assembly on circuit boards (THT),
for general electronic equipment, classification level G
Festwiderstände zur Verwendung in Geräten der Elektronik - Teil 2-10: Vordruck für
Bauartspezifikation: Niedrigbelastbare Schichtwiderstände mit Drahtanschlüssen für
Durchsteckmontage auf Leiterplatten (THT), für allgemeine Geräte der Elektronik,
Klassifikationsstufe G
Résistances fixes utilisées dans les équipements électroniques - Partie 2-10:
Spécification particulière-cadre: Résistances à broches à couche, à faible dissipation,
pour assemblage par trous traversants sur cartes de circuit imprimé (carte THT) pour
des équipements électroniques généraux, niveau de classification G
Ta slovenski standard je istoveten z: prEN IEC 60115-2-10:2024/prAA:2024
ICS:
31.040.10 Fiksni upor Fixed resistors
oSIST prEN IEC 60115-2- en
10:2024/oprAA:2024
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN IEC 60115-2-10:2024/oprAA:2024
oSIST prEN IEC 60115-2-10:2024/oprAA:2024
EUROPEAN STANDARD DRAFT
prEN IEC 60115-2-10:2024
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
October 2024
ICS 31.040.10 -
English Version
Fixed resistors for use in electronic equipment - Part 2-10: Blank
detail specification: Low-power film resistors with leads for
through-hole assembly on circuit boards (THT), for general
electronic equipment, classification level G
To be completed Festwiderstände zur Verwendung in Geräten der Elektronik
- Teil 2-10: Vordruck für Bauartspezifikation:
Niedrigbelastbare Schichtwiderstände mit
Drahtanschlüssen für Durchsteckmontage auf Leiterplatten
(THT), für allgemeine Geräte der Elektronik,
Klassifikationsstufe G
This draft amendment prAA, if approved, will modify the European Standard prEN IEC 60115-2-10:2024; it is submitted to CENELEC
members for enquiry.
Deadline for CENELEC: 2024-12-27.
It has been drawn up by CLC/TC 40XB.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 78797 Ref. No. prEN IEC 60115-2-10:2024/prAA:2024 E
oSIST prEN IEC 60115-2-10:2024/oprAA:2024
prEN IEC 60115-2-10:2024/prAA:2024
Contents Page
1 1 Modification to Clause 0.3 . 4
2 2 Modification to the title proposed for the detail specification . 4
3 3 Modification to Annex X . 4
4 4 Addition of Annex ZA . 4
5 Annex ZA (normative) Normative references to international publications with their
6 corresponding European publications . 5
oSIST prEN I
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...