Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs

Systeme der industriellen Prozesstechnik - Methoden der Beurteilung des Betriebsverhaltens von Ventilstellungsreglern mit pneumatischen Ausgängen

Systèmes de commande des processus industriels - Méthodes d'évaluation des performances des positionneurs de vannes à sorties pneumatiques

Sistemi za upravljanje industrijskih procesov - Postopki za ocenjevanje lastnosti pozicionirnikovz ventili s pnevmatskimi izhodi

General Information

Status
Not Published
Publication Date
25-Jan-2026
Current Stage
4060 - Enquiry results established and sent to TC, SR, BTTF - Enquiry
Start Date
27-Sep-2024
Completion Date
27-Sep-2024

Relations

Buy Standard

Draft
prEN IEC 61514:2024
English language
40 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2024
Sistemi za upravljanje industrijskih procesov - Postopki za ocenjevanje lastnosti
pozicionirnikovz ventili s pnevmatskimi izhodi
Industrial-process control systems - Methods of evaluating the performance of valve
positioners with pneumatic outputs
Systeme der industriellen Prozesstechnik - Methoden der Beurteilung des
Betriebsverhaltens von Ventilstellungsreglern mit pneumatischen Ausgängen
Systèmes de commande des processus industriels - Méthodes d'évaluation des
performances des positionneurs de vannes à sorties pneumatiques
Ta slovenski standard je istoveten z: prEN IEC 61514:2024
ICS:
23.060.99 Drugi ventili Other valves
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

65B/1256/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61514 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-07-05 2024-09-27
SUPERSEDES DOCUMENTS:
65B/1202/RR, 65B/1249/CC
IEC SC 65B : MEASUREMENT AND CONTROL DEVICES
SECRETARIAT: SECRETARY:
United States of America Mr Wallie Zoller
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which
they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries”
clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for
submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Industrial-process control systems - Methods of evaluating the performance of valve positioners with
pneumatic outputs
PROPOSED STABILITY DATE: 2027
NOTE FROM TC/SC OFFICERS:
file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions. You may not copy
or "mirror" the file or printed version of the document, or any part of it, for any other purpose without permission in writing from IEC.

IEC CDV 61514 © IEC:2024 – 2 –
1 CONTENTS
2 Page
3 FOREWORD . 7
4 1 Scope and object . 5
5 2 Normative references . 5
3 Definitions . 6
7 4 General conditions for tests . 9
8 Environmental test conditions . 9
4.1
9 4.1.1 Recommended limits of ambient conditions for test measurements . 10
10 4.2 Supply conditions . 10
11 4.2.1 Reference values. 10
12 4.2.2 Tolerances . 10
13 5 General testing procedures . 11
14 5.1 Test equipment . 11
15 5.2 Test methods . 11
16 5.3 Testing precautions . 11
17 5.4 Basic test arrangement . 12
18 Positioner tested independently of an actuator . 12
5.4.1
19 5.4.2 Positioner tested in conjunction with an actuator . 13
20 5.5 Initial setting-up . 13
21 5.5.1 Positioner tested independently of an actuator . 13
22 5.5.2 Positioner tested in conjunction with an actuator . 13
23 6 Test procedures . 14
24 6.1 Gain characteristic . 14
25 6.1.1 Positioner tested independently of an actuator . 14
26 6.1.2 Positioner tested in conjunction with an actuator . 14
27 6.2 Travel characteristic . 15
28 Positioner tested independently of an actuator . 15
6.2.1
29 6.2.2 Positioner tested in conjunction with an actuator . 15
30 6.3 Accuracy related terms . 15
31 6.3.1 Inaccuracy . 15
32 6.3.2 Measured error . 16
33 6.3.3 Conformity error or linearity error (non-conformity/non-linearity) . 16
34 Hysteresis . 16
6.3.4
35 6.3.5 Repeatability error (non-repeatability) . 16
36 6.4 Dead band . 16
37 6.4.1 Dead band – Input path . 16
38 6.4.2 Dead band – Travel path . 18
39 6.5 Airflow data . 19
40 Airflow characteristic . 19
6.5.1
41 6.5.2 Steady-state air consumption . 21
42 6.6 Effects of influence quantities . 21
43 6.6.1 Supply pressure . 22
44 6.6.2 Ambient temperature . 23
45 6.6.3 Relative humidity . 23
46 Mounting position . 24
6.6.4
IEC CDV 61514 © IEC:2024 – 3 –
47 6.6.5 Mechanical shock . 25
48 6.6.6 Vibration . 25
49 6.6.7 Power-frequency magnetic field . 26
50 6.6.8 Radiated electromagnetic field interference . 27
51 6.6.9 Electrical fast transients (burst) . 28
52 Surge voltage immunity . 28
6.6.10
53 6.6.11 Series mode interference . 29
54 6.7 Input over-range . 30
55 6.7.1 Positioner tested independently of an actuator . 30
56 6.7.2 Positioner tested in conjunction with an actuator . 30
57 6.7.3 Common text for positioners tested independently of an actuator/with
an actuator . 30
59 6.8 Drift . 31
60 6.8.1 Start-up drift . 31
61 6.8.2 Long-term drift . 31
62 6.9 Accelerated life test . 32
63 6.9.1 Positioner tested independently of an actuator . 32
64 Positioner tested in conjunction with an actuator . 32
6.9.2
65 6.9.3 Common test for positioners tested in conjunction with/independently of
66 an actuator . 32
67 6.10 Dynamic response . 32
68 6.10.1 General considerations . 32
69 6.10.2 Basic test arrangement . 33
70 Frequency response . 33
6.10.3
71 6.10.4 Step response . 35
72 7 Other considerations . 36
73 7.1 General . 36
74 Safety . 37
7.2
75 7.3 Degree of protection provided by enclosures . 37
76 7.4 Documentary information . 37
77 7.5 Installation . 38
78 7.6 Routine maintenance and adjustment . 38
79 7.7 Repair . 38
80 Protective finishes . 38
7.8
81 7.9 Design features . 38
82 7.10 Variants . 38
83 7.11 Tools and equipment . 38
84 8 Test report and documentation . 38
85 9 Bibliography . 40
IEC CDV 61514 © IEC:2024 – 4 –
88 INTERNATIONAL ELECTROTECHNICAL COMMISSION
89 ____________
91 INDUSTRIAL-PROCESS CONTROL SYSTEMS –
92 Methods of evaluating the performance of valve positioners
93 with pneumatic outputs
95 FOREWORD
96 1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
97 all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
98 international co-operation on all questions concerning standardization in the electrical and electronic fields. To
99 this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
100 entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
101 participate in this preparatory work. International, governmental and non-governmental organizations liaising with
102 the IEC also participate in this preparation. The IEC collaborates closely with the International Organization for
103 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
104 2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
105 international consensus of opinion on the relevant subjects since each technical committee has representation
106 from all interested National Committees.
107 3) The documents produced have the form of recommendations for international use an
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.