FprEN IEC 60115-4:2025/FprAA:2025
(Amendment)Fixed resistors for use in electronic equipment - Part 4: Sectional specification: Power resistors for through hole assembly on circuit boards (THT) or for assembly on chassis
Fixed resistors for use in electronic equipment - Part 4: Sectional specification: Power resistors for through hole assembly on circuit boards (THT) or for assembly on chassis
This part of IEC 60115 is applicable to fixed power resistors for use in electronic equipment. This standard relates to resistors having a rated dissipation typically greater than 1W up to and including 1000W for use in electronic equipment. This standard is applicable to fixed power resistors with a maximum surface temperature (MET) higher than the preferred upper category temperature (UCT) of 200°C. These resistors are typically described according to types (different geometric shapes) and styles (different dimensions) and product technology. The resistive element of these resistors is typically - protected by a conformal lacquer coating or - cement coating or - vitreous enamel or - a ceramic body or - any other housing, which is to be described in the relevant specification. The electrical connection of these resistors is typically achieved by means of - lead wire terminations or - punched terminals or lug terminals or - push on terminals or - screw terminals or - any other termination, which is to be described in the relevant specification In special cases, a heat sink may be applicable but not mandatory. The object of this standard is to prescribe preferred ratings and characteristics and to select from IEC 60115-1 the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of resistor. Test severities and requirements prescribed in detail specifications referring to this sectional specification shall be of equal or higher performance level, because lower performance levels are not permitted
Résistances fixes utilisées dans les équipements électroniques - Partie 4: Spécification intermédiaire: Résistances de puissance pour assemblage par trous traversants sur cartes de circuit imprimé (carte THT) ou pour assemblage sur châssis
Stalni upori za elektronsko opremo - 4. del: Področna specifikacija: Močnostni upori za montažo skozi prehodne luknje tiskanih vezij ali za pritrditev na šasijo - Dopolnilo AA
General Information
- Status
- Not Published
- Publication Date
- 19-Feb-2026
- Technical Committee
- CLC/TC 40XB - CLC/TC 40XB
- Current Stage
- 5060 - Voting results sent to TC, SR - Formal Approval
- Start Date
- 26-Dec-2025
- Due Date
- 13-Aug-2025
- Completion Date
- 26-Dec-2025
Relations
- Effective Date
- 17-Oct-2023
Overview
The FprEN IEC 60115-4:2025/FprAA:2025 standard, developed by CLC, specifies requirements for fixed power resistors designed for electronic equipment. This part of the IEC 60115 series focuses on power resistors intended for through-hole assembly (THT) on circuit boards or direct assembly on chassis. It applies to resistors with rated power dissipation greater than 1W and up to 1000W, suitable for robust electronic applications where power handling and reliability are critical.
This standard governs fixed power resistors with maximum surface temperatures (MET) exceeding the preferred upper category temperature (UCT) of 200°C. It defines parameters such as preferred ratings, characteristics, testing methods, and quality assessments, ensuring compliance with stringent performance and safety requirements across global markets.
Key Topics
Scope and Applicability
Applies to fixed power resistors with rated dissipation from >1W to 1000W, designed for through-hole mounting on printed circuit boards or chassis assembly. Suitable for high-temperature environments with MET above 200°C.Resistor Types and Styles
Covers various resistor types distinguished by geometric shapes and physical dimensions. Includes different product technologies tailored for specific applications and power ratings.Protective Coatings and Housings
The resistive element must be protected by one of the following:- Conformal lacquer coating
- Cement coating
- Vitreous enamel
- Ceramic body or other specified housings
Electrical Terminations
Electrical connections can be made using:- Lead wire terminations
- Punched or lug terminals
- Push-on or screw terminals
- Other termination types specified in detailed product documentation
Heat Dissipation Considerations
Use of heat sinks is optional but may be applied in special cases to enhance power dissipation and reliability.Quality and Testing
The standard specifies preferred test severities and general performance requirements, referencing IEC 60115-1 for quality assessment procedures, test methods, and measurement standards. Lower performance levels than those specified are not permitted, ensuring high reliability.
Applications
Electronics Manufacturing
Utilized in the mass production of electronic equipment requiring stable power resistors capable of handling high dissipation loads.Circuit Board Assembly
Designed for through-hole technology (THT) assemblies, these power resistors are suited for PCBs with high current or heat dissipation needs.Chassis Mounting
Suitable for mechanically robust applications requiring resistors mounted directly on device chassis for efficient heat management.Industrial and Consumer Electronics
Applicable in various sectors including industrial machinery, automotive electronics, telecommunications, and consumer devices where fixed power resistor reliability is critical.
Related Standards
IEC 60115-1: Generic Specification for Fixed Resistors
Provides foundational quality assessment and test methods referenced in this standard.IEC 60115-2: Low Power Film Resistors for THT Assembly
Details specifications for low power resistors complementing the high-power focus of Part 4.IEC 60068 Series: Environmental Testing
Outlines general environmental test procedures used to verify resistor durability and reliability.IEC 60062 and IEC 60063: Marking Codes and Preferred Number Series
Define coding and sizing conventions employed in resistor manufacturing and identification.IEC 61193-2: Quality Assessment Sampling Plans
Supports the statistical quality limits (SVQL) utilized in product inspection and acceptance.
By meeting the criteria outlined in FprEN IEC 60115-4:2025/FprAA:2025, manufacturers ensure that fixed power resistors are reliable, durable, and capable of performing safely in demanding electronic applications. This standard supports engineers and manufacturers seeking compliant, standardized components that meet international safety and performance benchmarks.
Frequently Asked Questions
FprEN IEC 60115-4:2025/FprAA:2025 is a draft published by CLC. Its full title is "Fixed resistors for use in electronic equipment - Part 4: Sectional specification: Power resistors for through hole assembly on circuit boards (THT) or for assembly on chassis". This standard covers: This part of IEC 60115 is applicable to fixed power resistors for use in electronic equipment. This standard relates to resistors having a rated dissipation typically greater than 1W up to and including 1000W for use in electronic equipment. This standard is applicable to fixed power resistors with a maximum surface temperature (MET) higher than the preferred upper category temperature (UCT) of 200°C. These resistors are typically described according to types (different geometric shapes) and styles (different dimensions) and product technology. The resistive element of these resistors is typically - protected by a conformal lacquer coating or - cement coating or - vitreous enamel or - a ceramic body or - any other housing, which is to be described in the relevant specification. The electrical connection of these resistors is typically achieved by means of - lead wire terminations or - punched terminals or lug terminals or - push on terminals or - screw terminals or - any other termination, which is to be described in the relevant specification In special cases, a heat sink may be applicable but not mandatory. The object of this standard is to prescribe preferred ratings and characteristics and to select from IEC 60115-1 the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of resistor. Test severities and requirements prescribed in detail specifications referring to this sectional specification shall be of equal or higher performance level, because lower performance levels are not permitted
This part of IEC 60115 is applicable to fixed power resistors for use in electronic equipment. This standard relates to resistors having a rated dissipation typically greater than 1W up to and including 1000W for use in electronic equipment. This standard is applicable to fixed power resistors with a maximum surface temperature (MET) higher than the preferred upper category temperature (UCT) of 200°C. These resistors are typically described according to types (different geometric shapes) and styles (different dimensions) and product technology. The resistive element of these resistors is typically - protected by a conformal lacquer coating or - cement coating or - vitreous enamel or - a ceramic body or - any other housing, which is to be described in the relevant specification. The electrical connection of these resistors is typically achieved by means of - lead wire terminations or - punched terminals or lug terminals or - push on terminals or - screw terminals or - any other termination, which is to be described in the relevant specification In special cases, a heat sink may be applicable but not mandatory. The object of this standard is to prescribe preferred ratings and characteristics and to select from IEC 60115-1 the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of resistor. Test severities and requirements prescribed in detail specifications referring to this sectional specification shall be of equal or higher performance level, because lower performance levels are not permitted
FprEN IEC 60115-4:2025/FprAA:2025 is classified under the following ICS (International Classification for Standards) categories: 31.040.10 - Fixed resistors. The ICS classification helps identify the subject area and facilitates finding related standards.
FprEN IEC 60115-4:2025/FprAA:2025 has the following relationships with other standards: It is inter standard links to FprEN IEC 60115-4:2025. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase FprEN IEC 60115-4:2025/FprAA:2025 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 60115-4:2024/oprAA:2024
01-december-2024
Stalni upori za elektronsko opremo - 4. del: Področna specifikacija: Močnostni
upori za montažo skozi prehodne luknje tiskanih vezij ali za pritrditev na šasijo
Fixed resistors for use in electronic equipment - Part 4: Sectional specification: Power
resistors for through hole assembly on circuit boards (THT) or for assembly on chassis
Résistances fixes utilisées dans les équipements électroniques - Partie 4: Spécification
intermédiaire: Résistances de puissance pour assemblage par trous traversants sur
cartes de circuit imprimé (carte THT) ou pour assemblage sur châssis
Ta slovenski standard je istoveten z: prEN IEC 60115-4:2024/prAA:2024
ICS:
31.040.10 Fiksni upor Fixed resistors
oSIST prEN IEC 60115- en
4:2024/oprAA:2024
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN IEC 60115-4:2024/oprAA:2024
oSIST prEN IEC 60115-4:2024/oprAA:2024
EUROPEAN STANDARD DRAFT
prEN IEC 60115-4:2024
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
October 2024
ICS 31.040.10 -
English Version
Fixed resistors for use in electronic equipment - Part 4: Sectional
specification: Power resistors for through hole assembly on
circuit boards (THT) or for assembly on chassis
To be completed To be completed
This draft amendment prAA, if approved, will modify the European Standard prEN IEC 60115-4:2024; it is submitted to CENELEC members
for enquiry.
Deadline for CENELEC: 2024-12-27.
It has been drawn up by CLC/TC 40XB.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 78799 Ref. No. prEN IEC 60115-4:2024/prAA:2024 E
oSIST prEN IEC 60115-4:2024/oprAA:2024
prEN IEC 60115-4:2024/prAA:2024
Contents Page
1 1 Modification to Annex X . 4
2 2 Addition of Annex ZA . 4
3 Annex ZA (normative) Normative references to international publications with their
4 corresponding European publications . 5
5 3 Addition of a new Annex ZX . 6
6 Annex ZX (informative) Cross-references for references to the prior revision of this document
7 . 7
oSIST prEN IEC 60115-4:2024/oprAA:2024
prEN IEC 60115-4:2024/prAA:2024
8 European foreword
9 This document (prEN IEC 60115-4:2024/prAA:2024) has been prepared by CLC/TC 40XB, “Resistors”.
10 This document is currently submitted to the Enquiry.
11 The following dates are proposed:
• latest date by which the existence of this document (doa) dor + 6 months
has to be announced at national level
• latest date by which this document has to be (dop) dor + 12 months
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) dor + 36 months
conflicting with this document have to be withdrawn (to be confirmed or
modified when voting)
12 Clauses, subclauses, annexes, notes, tables and figures which are additional to those in IEC 60115-4:2022 are
13 prefixed “Z”.
oSIST prEN IEC 60115-4:2024/oprAA:2024
prEN IEC 60115-4:2024/prAA:2024
14 1 Modification to Annex X
15 Replace the contents of Annex X with the following:
16 “This annex, providing cross-references for references to IEC 60115-4:1982, has
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...