EN 60947-7-3:2002

EUROPEAN STANDARD EN 60947-7-3
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2002

ICS 29.120.99; 29.130.20
English version
Low-voltage switchgear and controlgear
Part 7-3: Ancillary equipment -
Safety requirements for fuse terminal blocks
(IEC 60947-7-3:2002)
Appareillage à basse tension Niederspannungsschaltgeräte
Partie 7-3: Matériels accessoires - Teil 7-3: Hilfseinrichtungen -
Prescriptions de sécurité Sicherheitsanforderungen
pour les blocs de jonction à fusible für Sicherungs-Reihenklemmen
(CEI 60947-7-3:2002) (IEC 60947-7-3:2002)

This European Standard was approved by CENELEC on 2002-10-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60947-7-3:2002 E
Foreword
The text of document 17B/1193/FDIS, future edition 1 of IEC 60947-7-3, prepared by SC 17B, Low-
voltage switchgear and controlgear, of IEC TC 17, Switchgear and controlgear, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 60947-7-3 on 2002-10-01.

This Part 7-3 shall be read in conjunction with EN 60947-1 and EN 60947-7-1. The provisions of the
general rules dealt with in EN 60947-1 and the requirements for terminal blocks of EN 60947-7-1 are
applicable to this standard, where specifically called for. Clauses and subclauses, tables, figures and
annexes thus applicable are identified by reference to "IEC 60947-1" or "IEC 60947-7-1", e.g. 1.2 of
IEC 60947-1, table 4 of IEC 60947-7-1 or annex A of IEC 60947-1.

The following dates were fixed:

– latest date by which the EN has to be implemented
at nat
...