Fixed resistors for use in electronic equipment - Part 9-1: Blank detail specification - Fixed surface mount resistor networks with individually measurable resistors - Assessment level EZ

is a supplementary document to the sectional specification and contains requirements for style, layout and minimum content of detail specifications

Festwiderstände zur Verwendung in Geräten der Elektronik - Teil 9-1: Vordruck für Bauartspezifikationen - Oberflächenmontierbare Netzwerke aus Festwiderständen mit einzeln messbaren Widerständen - Bewertungsstufe EZ

Résistances fixes utilisées dans les équipements électroniques - Partie 9-1: Spécification particulière cadre - Réseaux de résistances fixes montés en surface avec des résistances mesurables individuellement - Niveau d'assurance EZ

is a supplementary document to the sectional specification and contains requirements for style, layout and minimum content of detail specifications

Fixed resistors for use in electronic equipment - Part 9-1: Blank detail specification: Fixed surface mount resistor networks with individually measurable resistors - Assessment level EZ (IEC 60115-9-1:2003)

General Information

Status
Published
Publication Date
05-Feb-2004
Technical Committee
Drafting Committee
Parallel Committee
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
20-Sep-2017

Buy Standard

Standard
EN 60115-9-1:2004
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN 60115-9-1:2004

STANDARD
september 2004
Fixed resistors for use in electronic equipment - Part 9-1: Blank detail specification:
Fixed surface mount resistor networks with individually measurable resistors -
Assessment level EZ (IEC 60115-9-1:2003)
ICS 31.040.10 Referenčna številka
SIST EN 60115-9-1:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60115-9-1
NORME EUROPÉENNE
EUROPÄISCHE NORM February 2004

ICS 31.040.10


English version


Fixed resistors for use in electronic equipment
Part 9-1: Blank detail specification -
Fixed surface mount resistor networks
with individually measurable resistors -
Assessment level EZ
(IEC 60115-9-1:2003)


Résistances fixes utilisées  Festwiderstände zur Verwendung
dans les équipements électroniques in Geräten der Elektronik
Partie 9-1: Spécification particulière cadre - Teil 9-1: Vordruck für
Réseaux de résistances fixes montés Bauartspezifikationen -
en surface avec des résistances Oberflächenmontierbare Netzwerke
mesurables individuellement - aus Festwiderständen mit einzeln
Niveau d'assurance EZ messbaren Widerständen -
(CEI 60115-9-1:2003) Bewertungsstufe EZ
(IEC 60115-9-1:2003)


This European Standard was approved by CENELEC on 2004-02-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60115-9-1:2004 E

---------------------- Page: 2 ----------------------

EN 60115-9-1:2004 - 2 -
Foreword
The text of document 40/1345/FDIS, future edition 1 of IEC 60115-9-1, prepared by IEC TC 40,
Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 60115-9-1 on 2004-02-01.

The following dates were fixed:

– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-11-01

– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-02-01


Annex ZA has been added by CENELEC.
__________

Endorsement notice

The text of the International Standard IEC 60115-9-1:2003 was approved by CENELEC as a
European Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60115-9-1:2004
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60115-1 1999 Fixed resistors for use in electronic EN 60115-1 2001
(mod) equipment
Part 1: Generic specification

IEC 60115-9 2003 Part 9: Sectional specification - Fixed EN 60115-9 2004
surface mount resistor networks with
individually measurable resistors

---------------------- Page: 4 ----------------------

INTERNATIONAL IEC
STANDARD 60115-9-1
First edition
2003-10
Fixed resistors for use in electronic equipment –
Part 9-1:
Blank detail specification:
Fixed surface mount resistor networks
with individually measurable resistors –
Assessment level EZ
© IEC 2003 ⎯ Copyright - all rights reserved
No part of this publi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.