EN 60730-2-10:2007

SLOVENSKI STANDARD
01-maj-2008
1DGRPHãþD
SIST EN 60730-2-10:1997
SIST EN 60730-2-10:1997/A1:1997
SIST EN 60730-2-10:1997/A2:2002
$YWRPDWVNHHOHNWULþQHNUPLOQHQDSUDYH]DXSRUDERYJRVSRGLQMVWYXLQ]DSRGREQR
XSRUDERGHO3RVHEQH]DKWHYH]D]DJRQVNHUHOHMH,(&
Automatic electrical controls for household and similar use - Part 2-10: Particular
requirements for motor starting relays
Automatische elektrische Regel- und Steuergeräte für den Hausgebrauch und ähnliche
Anwendungen - Teil 2-10: Besondere Anforderungen an Motorstartrelais
Dispositifs de commande électrique automatiques a usage domestique et analogue -
Partie 2-10: Regles particulieres pour les relais électriques de démarrage de moteur
Ta slovenski standard je istoveten z: EN 60730-2-10:2007
ICS:
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60730-2-10
NORME EUROPÉENNE
November 2007
EUROPÄISCHE NORM
ICS 97.120 Supersedes EN 60730-2-10:1995 + A1:1996 + A2:2002

English version
Automatic electrical controls for household and similar use -
Part 2-10: Particular requirements for motor-starting relays
(IEC 60730-2-10:2006)
Dispositifs de commande électrique Automatische elektrische
automatiques à usage domestique Regel- und Steuergeräte
et analogue - für den Hausgebrauch
Partie 2-10: Règles particulières und ähnliche Anwendungen -
pour les relais électriques Teil 2-10: Besondere Anforderungen
de démarrage de moteur an Motorstartrelais
(CEI 60730-2-10:2006) (IEC 60730-2-10:2006)

This European Standard was approved by CENELEC on 2007-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60730-2-10:2007 E
Foreword
The text of the international Standard IEC 60730-2-10:2006, prepared by IEC TC 72, Automatic controls for
household use, was submitted to the formal vote and was approved by CENELEC as EN 60730-2-10 on
2007-09-01.
This European Standard supersedes EN 60730-2-10:1995 + corrigendum March 2001 + A1:1996 +
corrigendum March 2001 + A2:2002.
The following dates were fixed:

– latest date by which the EN has to be implemented

at national level by publication of an identical
(dop) 2008-09-01
national standard or by endorsement

– latest date by which the national standards conflicting
(dow) 2010-09-01
with the EN have to be withdrawn
This Part 2-10 is to be used in conjunction with EN 60730-1:2000 + A1:2004, Automatic electrical controls for
household and similar use – Part 1: General requirements, and any subsequent amendments.
This Part 2-10 supplements or modifies the corresponding clauses in EN 60730-1 so as to convert that
publication into the European Standard: Particular requirements for electrically operated motor-starting
relays.
Where this Part 2-10 states "addition", "modification" or "replacement", the relevant requirement, test
specification or explanatory matter in Part 1 should be adapted accordingly.
Where no change is necessary, this Part 2-10 indicates that the relevant clause or subclause applies.
In this publication, the following print types are used:
– Requirements proper: in roman type.
– Test specifications: in italic type.
– Explanatory matter: in smaller roman type.
Subclauses, notes, items or figures which are additional to those in Part 1 are numbered starting from 101,
additional annexes are lettered AA, BB, etc.
__________
Endorsement notice
The text of the International Standard IEC 60730-2-10:2006 was approved by CENELEC as a European
Standard without any modification.
__________
NORME CEI
INTERNATIONALE
IEC
60730-2-10
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2006-10
Dispositifs de commande électrique
automatiques à usage domestique et analogue –
Partie 2-10:
Règles particulières pour les relais
électriques de démarrage de moteur

Automatic electrical controls
for household and similar use –
Part 2-10:
Particular requirements for motor-starting relays
© IEC 2006 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
L
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60730-2-10 © IEC:2006 – 3 –
CONTENTS
FOREWORD.5

1 Scope and normative references .9
2 Definitions .11
3 General requirements .11
4 General notes on tests .11
5 Rating .11
6 Classification.11
7 Information .13
8 Protection against electric shock .13
9 Provision for protective earthing .13
10 Terminals and terminations .15
11 Constructional requirements .15
12 Moisture and dust resistance .15
13 Electric strength and insulation resistance.15
14 Heating .15
15 Manufacturing deviation and drift.15
16 Environmental stress .15
17 Endurance.15
18 Mechanical strength .15
19 Threaded parts and connections.17
20 Creepage distances, clearances and distances through solid insulation .17
21 Resistance to heat, fire and tracking.17
22 Resistance to corrosion .17
23 Electromagnetic compatibility (EMC) requirements – emission .17
24 Components .17
25 Normal operation.17
26 Electromagnetic compatibility (EMC) requirements – immunity .17
27 Abnormal operation .17
28 Guidance on the use of electronic disconnection .19

Annexes .19
Annex C (normative) Cotton used for mercury switch test .19
Annex E (normative) Circuit for measuring leakage current.19
Annex H (normative) Requirements for electronic controls .19

60730-2-10 © IEC:2006 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
AUTOMATIC ELECTRICAL CONTROLS
FOR HOUSEHOLD AND SIMILAR USE –

Part 2-10: Particular requirements for motor-starting relays

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60730-2-10 has been prepared by IEC technical committee 72:
Automatic controls for household use.
This second edition cancels and replaces the first edition published in 1991, Amendment 1
(1994) and Amendment 2 (2001). This second edition constitutes a technical revision and
updates the standard to current practices as well as to the applicable horizontal standards.

60730-2-10 © IEC:2006 – 7 –
The text of this standard is based upon the following documents:
FDIS Report on voting
72/711/FDIS 72/724/RVD
Full information on the voting for the approval of this part can be found in the report
...