Abstract

This standard deals with the safety of the following appliances, their rated voltage being not more than 250 V for single-phase appliances, 480 V for other appliances and 24 V DC for appliances when battery-operated: – refrigerating appliances for household and similar use; – ice-makers incorporating a motor-compressor and ice-makers intended to be incorporated in frozen food storage compartments intended for household use; – refrigerating appliances and ice-makers for applications similar to household use such as for camping, in leisure accommodation vehicles, on boats for leisure purposes and on board ships; – mobile refrigerating appliances. These appliances can be operated from the mains, from a separable battery or operated either from the mains or from a separable battery or from other sources of energy (gas, liquid and solid fuel). This standard deals also with refrigerating appliances intended for the use on boats for leisure purposes and on board ships, for which the normative Annex FF is applicable. This standard also deals with the safety of ice-cream appliances intended for household use, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. It also deals with compression-type appliances for household and similar use, which use flammable refrigerants. This standard does not cover features of the construction and operation of those refrigerating appliances which are dealt with in other IEC standards.

Status
Not Published
Publication Date
11-May-2027
Current Stage
4599 - Dispatch of FV draft to CMC - Finalization for Vote
Start Date
06-Oct-2026
Due Date
26-Mar-2027
Completion Date
06-Oct-2026

Buy Documents

Draft

prEN IEC 60335-2-24:2026 - BARVE

English language (73 pages)
Preview
Preview
e-Library read for
×1 day

prEN IEC 60335-2-24:2026 is a draft European Standard from CENELEC, based on IEC 60335-2-24:2025. It sets particular safety requirements for refrigerating appliances, ice-cream appliances and ice-makers for household and similar use, including camping, mobile, boat and ship applications, and for compression-type appliances that use flammable refrigerants. Engineers, test labs and compliance teams use it to design, mark, test and assess these appliances against electrical, thermal, mechanical and fire-related hazards.

What does prEN IEC 60335-2-24:2026 specify?

prEN IEC 60335-2-24:2026 specifies safety requirements for a wide range of refrigerating appliances and related appliances with rated voltages up to 250 V for single-phase appliances, 480 V for other appliances, and 24 V DC for battery-operated appliances. It covers household and similar refrigerating appliances, ice-makers, ice-cream appliances and mobile refrigerating appliances, including equipment used in camping, leisure accommodation vehicles, boats for leisure purposes and on board ships.

The document also addresses compression-type appliances using flammable refrigerants and appliances for use in household-like settings such as staff kitchens, farm houses, hotels, bed and breakfast environments, and catering and similar non-retail applications. It is organized into clauses 1 to 32, followed by annexes A, C, D, P, AA, BB, CC, DD, EE and FF.

AnnexWhat it covers
ARoutine tests and sound manufacturing practice for compression-type appliances using flammable refrigerant
CAgeing test on motors
DThermal motor protectors
PGuidance for appliances used in tropical climates
AALocked-rotor test of fan motors
BBMethod for accumulation of frost
CCNon-sparking "n" electrical apparatus and test conditions for "dc" devices
DDVoid
EETest for material encasing and in contact with thermal insulation
FFAppliances intended to be used on boats for leisure purposes and on board ships

What are the key requirements of prEN IEC 60335-2-24:2026?

prEN IEC 60335-2-24:2026 is built around hazard control for normal use, abnormal operation and foreseeable misuse. The most important points are the test conditions, refrigerant safety measures, marking and instructions, temperature limits, and the construction rules that keep doors, drawers, insulation and components safe in practice.

Test conditions and operating assumptions

Clause 5 requires extra specially prepared samples for some tests, and it warns that the tests in 22.107 to 22.109 need special precautions because they are potentially hazardous. Clause 5 also requires tests to be carried out with each source of energy in turn, and with combinations of energy sources if interlocking does not prevent simultaneous use.

The ambient temperature used for testing depends on the appliance type and climatic class. Ice-cream appliances are tested at 23 °C ± 2 °C, while other appliances are tested according to their SN, N, ST or T climatic class. In practice, this matters because performance and safety measurements must be made under the worst realistic environment for the declared class.

Flammable refrigerants, leakage and ignition risk

Clause 4 states the basic safety approach for flammable refrigerants: the standard addresses ignition of leaked refrigerant by ignition sources associated with the appliance. Clause 22 then turns that principle into detailed construction rules.

The most notable requirements are the refrigerant charge limit of 150 g in each separate refrigerant circuit for compression-type appliances using flammable refrigerants, the pressure relief device requirements for transcritical systems, and the rules for protected and unprotected cooling systems in Clauses 22.107 to 22.109. Clause 22.110 also limits surface temperatures on exposed parts so they stay below the auto-ignition temperature of the refrigerant, reduced by 100 K. For designers, that means refrigerant routing, enclosure layout, ventilation and component placement all need to be checked together.

Marking and instructions

Clause 7 requires markings for the heating system input, defrosting input, rated power input or current, climatic class letters SN, N, ST or T, refrigerant identification, refrigerant mass, battery voltage and battery type where relevant, and the supply details for any additional source of energy. It also requires warnings and symbols for flammable refrigerants, flammable insulation blowing gases, transcritical R-744 systems and, where needed, keeping the appliance away from rain.

The instructions must state the intended use and include safety directions for camping use, boat and ship use where applicable, flammable refrigerant handling, installation, servicing and disposal, and the prohibition on storing flammable propellants or explosive substances inside the appliance. In practice, this means the manual and rating plate are part of the safety design, not just product documentation.

Heating, defrosting and electrical protection

Clauses 10 and 11 define how power input, current and temperature rise are measured under normal operation. Clause 10 requires the appliance to be tested with user-adjustable temperature controls set for the lowest temperature, and Clauses 10.101 and 10.102 check that the marked defrosting and heating inputs stay within the allowed deviation.

Clause 11 sets temperature-rise limits, including special limits for motor-compressors and for appliances in warmer climatic classes. Clauses 11.102 and 11.103 require defrosting systems and other heating systems to avoid excessive temperatures. Clauses 15 and 16 then check moisture resistance, leakage current and electric strength, including special treatment of battery circuits and separate mains/battery circuits.

Mechanical safety and enclosure integrity

Clause 20 requires stability, including specific checks for doors, drawers and loads on shelves. It also gives rules for free space compartments so that a person inside can open the door or drawer from inside. Clause 22.115 forbids self-latching locks on doors or drawers that give access to a free space compartment.

Clause 21 covers mechanical strength, including impact resistance and, for camping, leisure accommodation vehicle and mobile refrigerating appliances, drop and vibration testing. Clause 22.116 adds detailed requirements for accessible glass panels, and Clause 22.117 sets the encasing and contact requirements for thermal insulation materials.

What terms does prEN IEC 60335-2-24:2026 define?

  • Refrigerating appliance - An enclosed thermally insulated appliance for household or similar use that cools one or more compartments for preserving foodstuffs, including beverages.
  • Compression-type appliance - An appliance that produces refrigeration by evaporating a refrigerant and then mechanically compressing and condensing the vapour.
  • Ice-maker - An appliance that makes ice by freezing water using electrical energy and includes storage for the ice.
  • Incorporated ice-maker - An ice-maker designed to be built into a frozen food storage compartment and without its own independent means for freezing water.
  • Mobile refrigerating appliance - An appliance intended to be moved while operating or used where mains power is unavailable, including portable appliances.
  • Free space - A compartment volume over 60 l that can trap a child and is accessible after opening a door, lid or drawer and removing removable internal parts.
  • Maximum allowable pressure (PS) - The maximum pressure that a refrigerating circuit, or part of it, is designed for as specified by the manufacturer.
  • Flammable refrigerant - A refrigerant with safety classification A2L, A2 or A3 according to ISO 817.

Who uses prEN IEC 60335-2-24:2026?

prEN IEC 60335-2-24:2026 is used by appliance manufacturers, product designers, test laboratories, certification bodies, quality managers and regulatory compliance teams. It is also relevant to suppliers of motor-compressors, fan motors, capacitors, controls, lamps, refrigerants and insulation materials.

The standard is especially relevant for teams working on household refrigerators, ice-makers, ice-cream appliances, camping appliances, mobile appliances and appliances for boats or ships. Buyers and technical assessors use it to judge whether a product has been designed and tested for the intended environment and energy source.

What changed in prEN IEC 60335-2-24:2026 from the previous edition?

prEN IEC 60335-2-24:2026 is based on IEC 60335-2-24:2025 and will supersede EN IEC 60335-2-24:2022 and EN IEC 60335-2-24:2022/A11:2022.

Which standards are used with prEN IEC 60335-2-24:2026?

StandardWhat it contributes
IEC 60068-2-6, IEC 60068-2-11, IEC 60068-2-27, IEC 60068-2-52Vibration, salt mist and shock test methods
IEC 60079 (all parts), IEC 60079-1, IEC 60079-7, IEC 60079-15Explosion-protection requirements for electrical apparatus
IEC 60252-1Safety and performance requirements for AC motor capacitors
IEC 60335-2-34Requirements for motor-compressors
IEC 60695-11-3, IEC 60695-11-20Fire-test flames and 5VA classification
IEC 60730-2-6, IEC 60730 (all parts)Automatic electrical controls and pressure sensing controls
IEC 60851-4Test methods for winding wires
ISO 209Aluminium and aluminium alloy composition
ISO 817Refrigerant designation and safety classification
ISO 4126-2Bursting disc safety devices
ISO 7010Registered safety signs
prEN IEC 60335-2-24:2026/prAA:2026Companion part read with this draft for EU legislation links

What does the prEN IEC 60335-2-24:2026 document contain?

prEN IEC 60335-2-24:2026 contains the full set of safety clauses for refrigerating appliances, ice-cream appliances and ice-makers, plus detailed annexes for special cases and test methods. The body includes requirements for marking, instructions, protection against access to live parts, heating, moisture resistance, leakage current, abnormal operation, stability, mechanical hazards, construction, internal wiring, components, supply connection, terminals, earthing, clearances, creepage distances, heat, fire, rusting and radiation-related hazards.

The document also includes test figures and apparatus drawings, including the spillage test apparatus, the scratching tool tip, the locked-rotor test circuit, the frost accumulation apparatus and the burner arrangement for the thermal insulation test. Tables 101 and 102 give key reference data for motor-compressor temperatures and refrigerant flammability parameters, which are used to check design limits and safety margins without reproducing the tabulated values here.

Relations

Effective Date
18-Aug-2026
Effective Date
31-Mar-2026
Effective Date
20-Feb-2026
Effective Date
20-Feb-2026
Effective Date
20-Feb-2026
Effective Date
20-Feb-2026
Effective Date
20-Feb-2026
Effective Date
20-Feb-2026
Effective Date
20-Feb-2026
Effective Date
20-Feb-2026
Effective Date
20-Feb-2026
Effective Date
20-Feb-2026
Effective Date
20-Feb-2026
Effective Date
20-Feb-2026
Effective Date
20-Feb-2026

Buy Documents

Draft

prEN IEC 60335-2-24:2026 - BARVE

English language (73 pages)
Preview
Preview
e-Library read for
×1 day

Frequently Asked Questions

FprEN IEC 60335-2-24:2026 is a draft published by CLC. Its full title is "Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers". This standard covers: This standard deals with the safety of the following appliances, their rated voltage being not more than 250 V for single-phase appliances, 480 V for other appliances and 24 V DC for appliances when battery-operated: – refrigerating appliances for household and similar use; – ice-makers incorporating a motor-compressor and ice-makers intended to be incorporated in frozen food storage compartments intended for household use; – refrigerating appliances and ice-makers for applications similar to household use such as for camping, in leisure accommodation vehicles, on boats for leisure purposes and on board ships; – mobile refrigerating appliances. These appliances can be operated from the mains, from a separable battery or operated either from the mains or from a separable battery or from other sources of energy (gas, liquid and solid fuel). This standard deals also with refrigerating appliances intended for the use on boats for leisure purposes and on board ships, for which the normative Annex FF is applicable. This standard also deals with the safety of ice-cream appliances intended for household use, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. It also deals with compression-type appliances for household and similar use, which use flammable refrigerants. This standard does not cover features of the construction and operation of those refrigerating appliances which are dealt with in other IEC standards.

This standard deals with the safety of the following appliances, their rated voltage being not more than 250 V for single-phase appliances, 480 V for other appliances and 24 V DC for appliances when battery-operated: – refrigerating appliances for household and similar use; – ice-makers incorporating a motor-compressor and ice-makers intended to be incorporated in frozen food storage compartments intended for household use; – refrigerating appliances and ice-makers for applications similar to household use such as for camping, in leisure accommodation vehicles, on boats for leisure purposes and on board ships; – mobile refrigerating appliances. These appliances can be operated from the mains, from a separable battery or operated either from the mains or from a separable battery or from other sources of energy (gas, liquid and solid fuel). This standard deals also with refrigerating appliances intended for the use on boats for leisure purposes and on board ships, for which the normative Annex FF is applicable. This standard also deals with the safety of ice-cream appliances intended for household use, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. It also deals with compression-type appliances for household and similar use, which use flammable refrigerants. This standard does not cover features of the construction and operation of those refrigerating appliances which are dealt with in other IEC standards.

FprEN IEC 60335-2-24:2026 is classified under the following ICS (International Classification for Standards) categories: 97.040.30 - Domestic refrigerating appliances. The ICS classification helps identify the subject area and facilitates finding related standards.

FprEN IEC 60335-2-24:2026 has the following relationships with other standards: It is inter standard links to prEN IEC 60335-2-34:2026, EN IEC 60079-15:2019/A11:2026, EN IEC 60730-1:2024, EN 60730-2-6:2016, ISO 817:2024, EN 60079-7:2015, EN IEC 60068-2-52:2018, EN IEC 60079-0:2018/A11:2024, EN 60068-2-27:2009, EN IEC 60079-18:2025, EN IEC 60730-1:2024/A11:2024, EN IEC 60079-14:2024, EN IEC 60079-25:2022/A1:2025, EN IEC 60079-28:2026, EN IEC 60598-1:2021. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

FprEN IEC 60335-2-24:2026 is associated with the following European legislation: EU Directives/Regulations: 2014/35/EU, 2014/53/EU; Standardization Mandates: M/511, M/536. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

FprEN IEC 60335-2-24:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-junij-2026
Gospodinjski in podobni električni aparati - Varnost - 2-24. del: Posebne zahteve
za hladilnike in aparate za pripravo sladoleda in ledu
Household and similar electrical appliances - Safety - Part 2-24: Particular requirements
for refrigerating appliances, ice-cream appliances and ice makers
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-24:
Besondere Anforderungen für Kühl-/Gefriergeräte und Speiseeis- und Eisbereiter
Appareils électrodomestiques et analogues - Sécurité - Partie 2-24: Exigences
particulières pour les appareils de réfrigération, les sorbetières et les fabriques de glace
Ta slovenski standard je istoveten z: prEN IEC 60335-2-24:2026
ICS:
97.040.30 Hladilni aparati za dom Domestic refrigerating
appliances
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD DRAFT
prEN IEC 60335-2-24
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2026
ICS 97.040.30 Will supersede EN IEC 60335-2-24:2022; EN IEC 60335-
2-24:2022/A11:2022
English Version
Household and similar electrical appliances - Safety - Part 2-24:
Particular requirements for refrigerating appliances, ice-cream
appliances and ice makers
(IEC 60335-2-24:2025)
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-24: Exigences particulières pour les appareils de ähnliche Zwecke - Teil 2-24: Besondere Anforderungen für
réfrigération, les sorbetières et les fabriques de glace Kühl-/Gefriergeräte und Speiseeis- und Eisbereiter
(IEC 60335-2-24:2025) (IEC 60335-2-24:2025)
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2026-07-10.

The text of this draft consists of the text of IEC 60335-2-24:2025.

If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 81708 Ref. No. prEN IEC 60335-2-24:2026 E

prEN IEC 60335-2-24:2026 (E)
European foreword
This document (prEN IEC 60335-2-24:2026) consists of the text of document IEC 60335-2-24:2025,
prepared by IEC/TC 61 "Safety of household and similar electrical appliances".
This document is currently submitted to the Enquiry.
The following dates are proposed:
• latest date by which the existence of this document (doa) dav + 6 months
has to be announced at national level
• latest date by which this document has to be (dop) dav + 12 months
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) dav + 36 months
conflicting with this document have to be withdrawn (to be confirmed or
modified when voting)
This document will supersede EN IEC 60335-2-24:2022 and all of its amendments and corrigenda (if
any).
This document is read in conjunction with prEN IEC 60335-2-24:2026/prAA:2026.
This document has been prepared under a standardisation request addressed to CENELEC by the
European Commission. The Standing Committee of the EFTA States subsequently approves these
requests for its Member States.
For the relationship with EU Legislation, see informative Annexes ZZA and ZZC, which are an integral
part of prEN IEC 60335-2-24:2026/prAA:2026.

IEC 60335-2-24 ®
Edition 9.0 2025-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Household and similar electrical appliances – Safety –

Part 2-24: Particular requirements for refrigerating appliances, ice-cream

appliances and ice-makers
Appareils électrodomestiques et analogues – Sécurité –

Partie 2-24: Exigences particulières pour les appareils de réfrigération, les

sorbetières et les fabriques de glace

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 97.040.30  ISBN 978-2-8327-0318-2

– 2 – IEC 60335-2-24:2025 © IEC 2025
CONTENTS
FOREWORD . 4
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 9
3 Terms and definitions . 11
4 General requirement . 13
5 General conditions for the tests . 13
6 Classification . 16
7 Marking and instructions . 16
8 Protection against access to live parts . 21
9 Starting of motor-operated appliances . 21
10 Power input and current . 21
11 Heating . 22
12 Charging of metal-ion batteries . 25
13 Leakage current and electric strength at operating temperature . 25
14 Transient overvoltages . 26
15 Moisture resistance . 26
16 Leakage current and electric strength . 28
17 Overload protection of transformers and associated circuits . 28
18 Endurance . 28
19 Abnormal operation . 28
20 Stability and mechanical hazards . 31
21 Mechanical strength . 34
22 Construction . 35
23 Internal wiring . 47
24 Components . 47
25 Supply connection and external flexible cords . 50
26 Terminals for external conductors . 51
27 Provision for earthing . 51
28 Screws and connections . 51
29 Clearances, creepage distances and solid insulation . 51
30 Resistance to heat and fire . 52
31 Resistance to rusting . 52
32 Radiation, toxicity and similar hazards . 52
Annexes . 55
Annex A (informative) Routine tests . 56
Annex C (normative) Ageing test on motors . 57
Annex D (normative) Thermal motor protectors . 58
Annex P (informative) Guidance for the application of this standard to appliances used
in tropical climates . 59
Annex AA (normative) Locked-rotor test of fan motors . 60
Annex BB (informative) Method for accumulation of frost . 62

IEC 60335-2-24:2025 © IEC 2025 – 3 –
Annex CC (normative) Non-sparking "n" electrical apparatus and test conditions for
"dc" devices . 65
Annex DD (informative) Void . 66
Annex EE (normative) Test for material encasing and in contact with thermal
insulation . 67
Annex FF (normative) Appliances intended to be used on boats for leisure purposes
and on board ships . 69
Bibliography . 71

Figure 101 – Apparatus for spillage test . 53
Figure 102 – Scratching tool tip details . 54
Figure AA.1 – Supply circuit for locked-rotor test of a single-phase fan motor . 61
Figure BB.1 – Diagram of apparatus for water evaporation and for accumulation
of frost . 63
Figure BB.2 – Apparatus for water evaporation and for accumulation of frost . 64
Figure EE.1 – Arrangement of the test specimen and burner. 68

Table 101 – Maximum temperatures for motor-compressors . 24
Table 102 – Refrigerant flammability parameters . 44

– 4 – IEC 60335-2-24:2025 © IEC 2025
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-24: Particular requirements for refrigerating appliances, ice-cream
appliances and ice-makers
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
may be required to implement this document. However, implementers are cautioned that this may not represent
the latest information, which may be obtained from the patent database available at https://patents.iec.ch. IEC
shall not be held responsible for identifying any or all such patent rights.
IEC 60335-2-24 has been prepared by subcommittee 61C: Safety of refrigeration appliances
for household and commercial use, of IEC technical committee 61: Safety of household and
similar electrical appliances. It is an International Standard.
This ninth edition cancels and replaces the eighth edition published in 2020. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) aligns the text with IEC 60335-1:2020;
b) new probe 19 has been introduced (8.1.1, 8.1.3, 20.2);

IEC 60335-2-24:2025 © IEC 2025 – 5 –
c) new exception for components inside the thermal insulation has been introduced (22.117);
d) new requirement for mobile refrigerating appliances, appliances to be used in leisure
accommodation vehicles like motor caravans, boats for leisure purposes and appliances to
be used on board ships has been introduced (Clause 1, 3.5.107, 3.5.108, 7.1, 7.6, 7.12,
7.14, 19.103, 21.101, 24.3, Annex FF);
e) text in 3.1.9.101, 3.1.9.102, 3.1.9.103 and 3.1.9.104 has been cancelled and the text copied
in 5.104;
f) new requirement for the evaluation of non-dangerous moving parts has been introduced
(20.2);
g) new abnormal test has been introduced (19.106);
h) reference to flammable refrigerant has been deleted (22.7);
i) new subclauses have been added (22.40, 22.49, 22.51);
j) requirement for the evaluation of motor-compressor has been updated (24.1);
k) Annex DD has been cancelled and the text copied to Annex A;
l) design pressure has been changed in maximum allowable pressure (3.8.101).
The text of this International Standard is based on the following documents:
Draft Report on voting
61C/929/FDIS 61C/931/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/publications.
A list of all parts of the IEC 60335 series, under the general title Household and similar electrical
appliances – Safety, can be found on the IEC website.
This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its
amendments unless that edition precludes it; in that case, the latest edition that does not
preclude it is used. It was established on the basis of the sixth edition (2020) of that standard.
NOTE 1 When "Part 1" is mentioned in this standard, it refers to IEC 60335-1.
This part 2 supplements or modifies the corresponding clauses in IEC 60335-1, so as to convert
that publication into the IEC standard: Safety requirements for refrigerating appliances, ice-
cream appliances and ice-makers.
When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as
far as is reasonable. When this standard states "addition", "modification" or "replacement", the
relevant text in Part 1 is to be adapted accordingly.
NOTE 2 The following numbering system is used:
– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;
– unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including
those in a replaced clause or subclause;
– additional annexes are lettered AA, BB, etc.

– 6 – IEC 60335-2-24:2025 © IEC 2025
NOTE 3 The following print types are used:
– requirements: in roman type;
– test specifications: in italic type;
– notes: in small roman type.
Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the
associated noun are also in bold.
NOTE 4 The attention of National Committees is drawn to the fact that equipment manufacturers and testing
organizations can need a transitional period following publication of a new, amended or revised IEC publication in
which to make products in accordance with the new requirements and to equip themselves for conducting new or
revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation nationally
not earlier than 12 months or later than 36 months from the date of publication.
The following differences exist in the countries indicated below.
– 22.101: E12 and E17 lamp holders are checked as specified for E14 and B15 lamp holders. E26 lamp holder is
checked as specified for E27 and B22 lamp holders (Japan).
– 22.110: For unsealed glass tube heaters, the temperature requirements are different (Japan).
– 22.117: Only the first two dashed items in the first paragraph of the requirement are allowed (Australia and New
Zealand).
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn, or
• revised.
IEC 60335-2-24:2025 © IEC 2025 – 7 –
INTRODUCTION
It has been assumed in the drafting of this International Standard that the execution of its
provisions is entrusted to appropriately qualified and experienced persons.
Guidance documents concerning the application of the safety requirements for appliances can
be accessed via TC 61 and SC 61C supporting documents on the IEC websites.
https://www.iec.ch/tc61/supportingdocuments
https://www.iec.ch/sc61c/supportingdocuments
This information is given for the convenience of users of this International Standard and does
not constitute a replacement for the normative text in this standard.
This standard recognizes the internationally accepted level of protection against hazards such
as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal
use taking into account the manufacturer's instructions. It also covers abnormal situations that
can be expected in practice and takes into account the way in which electromagnetic
phenomena can affect the safe operation of appliances.
This standard takes into account the requirements of IEC 60364 as far as possible so that there
is compatibility with the wiring rules when the appliance is connected to the supply mains.
However, national wiring rules can differ.
If an appliance within the scope of this standard also incorporates functions that are covered
by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as
far as is reasonable. If applicable, the influence of one function on the other is taken into
account.
When a part 2 standard does not include additional requirements to cover hazards dealt with in
Part 1, Part 1 applies.
NOTE 1 This means that the technical committees responsible for the part 2 standards have determined that it is
not necessary to specify particular requirements for the appliance in question over and above the general
requirements.
This standard is a product family standard dealing with the safety of appliances and takes
precedence over horizontal and generic standards covering the same subject.
NOTE 2 Horizontal publications, basic safety publications and group safety publications covering a hazard are not
applicable since they have been taken into consideration when developing the general and particular requirements
for the IEC 60335 series of standards.
NOTE 3 Standards dealing with non-safety aspects of household appliances are:
– IEC standards published by TC 59 concerning methods of measuring performance;
– CISPR 11, CISPR 14-1 and relevant IEC 61000-3 series standards concerning electromagnetic emissions;
– CISPR 14-2 concerning electromagnetic immunity;
– IEC standards published by TC 111 concerning environmental matters.
An appliance that complies with the text of this standard will not necessarily be considered to
comply with the safety principles of the standard if, when examined and tested, it is found to
have other features that impair the level of safety covered by these requirements.
An appliance employing materials or having forms of construction differing from those detailed
in the requirements of this standard may be examined and tested according to the intent of the
requirements and, if found to be substantially equivalent, may be considered to comply with the
standard.
– 8 – IEC 60335-2-24:2025 © IEC 2025
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-24: Particular requirements for refrigerating appliances, ice-cream
appliances and ice-makers
1 Scope
This clause of Part 1 is replaced by the following.
This part of IEC 60335 deals with the safety of the following appliances, their rated voltage
being not more than 250 V for single-phase appliances, 480 V for other appliances and 24 V DC
for appliances when battery-operated:
– refrigerating appliances for household and similar use;
– ice-makers incorporating a motor-compressor and ice-makers intended to be incorporated
in frozen food storage compartments intended for household use;
– refrigerating appliances and ice-makers for applications similar to household use such as
for camping, in leisure accommodation vehicles, on boats for leisure purposes and on
board ships;
– mobile refrigerating appliances.
These appliances can be operated from the mains, from a separable battery or operated either
from the mains or from a separable battery or from other sources of energy (gas, liquid and
solid fuel).
This standard deals also with refrigerating appliances intended for the use on boats for leisure
purposes and on board ships, for which the normative Annex FF is applicable.
This standard also deals with the safety of ice-cream appliances intended for household use,
their rated voltage being not more than 250 V for single-phase appliances and 480 V for other
appliances.
It also deals with compression-type appliances for household and similar use, which use
flammable refrigerants.
This standard does not cover features of the construction and operation of those refrigerating
appliances which are dealt with in other IEC standards.
Refrigerating appliances not intended for normal household use but which nevertheless can
be a source of danger to the public, such as
– refrigerating appliances used in staff kitchen areas in shops, offices and other working
environments,
– refrigerating appliances used in farm houses and by clients in hotels, motels and other
residential type environments,
– refrigerating appliances used in bed and breakfast type environments, and
– refrigerating appliances used in catering and similar non-retail applications
are within the scope of this standard.

IEC 60335-2-24:2025 © IEC 2025 – 9 –
As far as is practicable, this standard deals with the common hazards presented by appliances
that are encountered by all persons in and around the home. However, in general, it does not
take into account
– persons whose
• physical, sensory or mental capabilities or
• lack of experience and knowledge
prevents them from using the appliance safely without supervision or instruction.
Attention is drawn to the fact that
– for appliances intended to be used in vehicles, leisure accommodation vehicles, boats for
leisure purposes, on board ships or aircraft, additional requirements can be necessary;
– in many countries, additional requirements are specified by national health authorities, the
national authorities responsible for the protection of labour, the national water supply
authorities and similar authorities;
– for appliances that are operated additional from other sources of energy (gas, liquid and
solid fuel), additional requirements can be necessary.
This standard does not apply to
– appliances intended for outdoor use, except for mobile refrigerating appliances;
– appliances designed exclusively for industrial purposes;
– appliances intended to be used in locations where special conditions prevail, such as the
presence of a corrosive or explosive atmosphere (dust, vapour or gas);
– appliances incorporating a battery intended as a power supply for the refrigerating function;
– appliances assembled on site by the installer;
– appliances with remote motor-compressors;
– motor-compressors (IEC 60335-2-34);
– commercial dispensing appliances and vending appliances (IEC 60335-2-75);
– commercial refrigerating appliances and ice-makers with an incorporated or remote
refrigerant unit or motor-compressor (IEC 60335-2-89);
– professional ice-cream makers (IEC 60335-2-118).
2 Normative references
This clause of Part 1 is applicable except as follows.
Addition:
IEC 60068-2-6:2007, Environmental testing – Part 2-6: Tests – Test Fc: Vibration (sinusoidal)
IEC 60068-2-11:2021, Environmental testing – Part 2-11: Tests – Test Ka: Salt mist
IEC 60068-2-27:2008, Environmental testing – Part 2-27: Tests – Test Ea and guidance: Shock
IEC 60068-2-52:2017, Environmental testing – Part 2-52: Tests – Test Kb: Salt mist, cyclic
(sodium chloride solution)
IEC 60079 (all parts), Explosive atmospheres

– 10 – IEC 60335-2-24:2025 © IEC 2025
IEC 60079-1:2014, Explosive atmospheres – Part 1: Equipment protection by flameproof
enclosures "d"
IEC 60079-7:2015, Explosive atmospheres – Part 7: Equipment protection by increased
safety "e"
IEC 60079-15:2017, Explosive atmospheres – Part 15: Equipment protection by type of
protection "n"
IEC 60252-1:2010, AC motor capacitors – Part 1: General – Performance, testing and rating –
Safety requirements – Guidance for installation and operation
IEC 60252-1:2010/AMD1:2013
IEC 60335-2-34:2024, Household and similar electrical appliances – Safety – Part 2-34:
Particular requirements for motor-compressors
IEC 60695-11-3:2012, Fire hazard testing – Part 11-3: Test flames – 500 W flames – Apparatus
and confirmational test methods
IEC 60695-11-20:2015, Fire hazard testing – Part 11-20: Test flames – 500 W flame test method
IEC 60730-2-6:2015, Automatic electrical controls – Particular requirements for automatic
electrical pressure sensing controls including mechanical requirements
IEC 60730-2-6:2015/AMD1:2019
IEC 60730 (all parts), Automatic electrical controls
IEC 60851-4:2016, Winding wires – Test methods – Part 4: Chemical properties
ISO 209, Aluminium and aluminium alloys – Chemical composition
ISO 817, Refrigerants – Designation and safety classification
ISO 4126-2:2018, Safety devices for protection against excessive pressure – Part 2: Bursting
disc safety devices
ISO 7010:2019, Graphical symbols – Safety colours and safety signs – Registered safety signs
Modification:
Replace
IEC 60598-1:2014, Luminaires – Part 1: General requirements and tests
IEC 60598-1:2014/AMD1:2017
with
IEC 60598-1:2020, Luminaires – Part 1: General requirements and tests
___________
A consolidated version of this document exists, comprising IEC 60730-2-6:2015 and
IEC 60730-2-6:2015/AMD1:2019.
IEC 60335-2-24:2025 © IEC 2025 – 11 –
3 Terms and definitions
This clause of Part 1 is applicable except as follows.
3.5 Definitions relating to types of appliances
3.5.101
refrigerating appliance
enclosed thermally insulated appliance of suitable volume for household use or similar, cooled
by an incorporated device and having one or more compartments intended for the preservation
of foodstuffs including cooling of beverages
3.5.102
compression-type appliance
appliance in which refrigeration is effected by the vaporization at low pressure in a heat
exchanger (evaporator) of a liquid refrigerant, the vapour thus formed being restored to the
original state by mechanical compression at a higher pressure and subsequent cooling in
another heat exchanger (condenser)
3.5.103
ice-maker
appliance in which ice is made by freezing water by a device consuming electrical energy and
having a compartment for storing the ice
3.5.104
incorporated ice-maker
ice-maker specially designed to be incorporated into a frozen food storage compartment and
without independent means for freezing water
3.5.105
absorption-type appliance
appliance in which refrigeration is effected by the evaporation in a heat exchanger (evaporator)
of a liquid refrigerant, in the liquid state, the resulting vapour being then absorbed by an
absorbent medium from which it is subsequently expelled at a higher partial vapour pressure
by heating and liquefied by cooling in another heat exchanger (condenser)
3.5.106
ice-cream appliance
compression-type appliance which is used to make ice-cream
3.5.107
mobile refrigerating appliance
appliance that is intended to be moved while in operation or operated on various areas and that
can also be used where there is no access to the mains electricity grid
Note 1 to entry: Mobile refrigerating appliances include portable appliances, because mobile refrigerating
appliances can be heavier than 18 kg.
Note 2 to entry: Mobile refrigerating appliances can also use extra low voltage or gas, liquid or solid fuel as the
energy source for the refrigeration functionality.
3.5.108
leisure accommodation vehicle
unit of living accommodation for temporary or seasonal occupation that can meet requirements
for construction and use of road vehicles
3.5.109
open deck
area which is exposed to marine environment

– 12 – IEC 60335-2-24:2025 © IEC 2025
3.5.110
dayroom
area that can be exposed to marine environment from time to time, but usually used inside the
cabin
3.6 Definitions relating to parts of an appliance
3.6.101
heating system
heating element with associated components such as timers, switches, thermostats and other
controls
3.6.102
condenser
heat exchanger in which, after compression, vaporized refrigerant is liquefied by losing heat to
an external cooling medium
3.6.103
evaporator
heat exchanger in which, after pressure reduction, the liquid refrigerant is vaporized by
absorbing heat from the medium to be refrigerated
3.6.104
free space
space with a volume exceeding 60 l where a child can be entrapped and which is accessible
after opening any door, lid or drawer and removing any detachable internal part, including
shelves, containers or removable drawers which are themselves only accessible after opening
any door or lid
In calculating the volume, a space with any single dimension not exceeding 150 mm or any two
orthogonal dimensions, each of which do not exceed 200 mm, is ignored.
Note 1 to entry: Evaluation of the ignored volume can be checked by applying a 150 mm ± 0,5 mm diameter sphere
or a square with 200 mm ± 0,5 mm side without appreciable force. The volume can be ignored if the sphere or square
cannot fit inside.
3.6.105
transcritical refrigeration system
refrigeration system where the pressure in the high-pressure side is above the pressure where
the vapour and liquid states of the refrigerant can coexist in thermodynamic equilibrium
3.6.106
gas cooler
heat exchanger in which, after compression, the refrigerant is cooled down, by transferring heat
to an external cooling medium, without changing state
Note 1 to entry: A gas cooler is normally used in transcritical refrigeration systems.
3.7 Definitions relating to safety components
3.7.101
bursting disc
disc or foil which bursts at a predetermined pressure to reduce a pressure in a refrigeration
system
3.7.102
pressure relief device
pressure sensing device, intended to reduce pressure automatically when pressures within the
refrigeration system exceed the setting pressure of the device

IEC 60335-2-24:2025 © IEC 2025 – 13 –
3.8 Definitions relating to miscellaneous matters
3.8.101
maximum allowable pressure
PS
maximum pressure that a refrigerating circuit or a part of a refrigerating circuit or component is
designed for, as specified by the manufacturer
Note 1 to entry: For example a refrigerating circuit can have the high side, low side or intermediate PS.
3.8.102
flammable refrigerant
refrigerant with a safety classification of A2L, A2 or A3 in accordance with ISO 817
Note 1 to entry: For refrigerant blends which have more than one safety classification, the most unfavourable
classification is taken for the purposes of this definition.
4 General requirement
This clause of Part 1 is applicable except as follows.
Addition:
The use of flammable refrigerants involves additional hazards which are not associated with
appliances using non-flammable refrigerants.
This standard addresses the hazards due to ignition of leaked flammable refrigerant by
potential ignition sources associated with the appliance.
The hazard due to ignition of leaked flammable refrigerant by an external potential ignition
source associated with the environment in which the appliance is installed is compensated by
the low probability of ignition.
5 General conditions for the tests
This clause of Part 1 is applicable except as follows.
5.2 Addition:
At least one additional specially prepared sample is required for the tests of 22.107.
Unless the motor-compressor conforms to IEC 60335-2-34 and is classified as being protected
by a motor-compressor protection system, at least one additional specially prepared sample is
required for the test of 19.1.
At least one additional sample of the fan motor, thermal motor protector combination can be
required for the test of 19.1.
The tests of 22.7 and 19.106 may be performed on separate samples.
Due to the potentially hazardous nature of the tests of 22.107, 22.108 and 22.109, special
precautions shall be taken when performing the tests.

– 14 – IEC 60335-2-24:2025 © IEC 2025
5.3 Addition:
Before starting the tests,
– ice-cream appliances are operated empty at rated voltage for 1 h, or for the maximum
setting of an incorporated timer, whichever is shorter;
– other compression-type appliances shall be operated at rated voltage for at least 24 h,
then switched off and left to stand for at least 12 h.
The test of 11.102 is carried out immediately after the tests of Clause 13.
The test of 15.105 is carried out immediately after the test of 11.102.
The tests of 15.101.1, 15.101.2, 15.103 and 15.104 are carried out immediately after the test
of 15.2.
5.4 Replacement:
Tests are carried out using each source of energy (electricity, gas, liquid and solid fuel) in turn.
Gas appliances are supplied at the appropriate rated pressure.
Tests are additionally carried out with all combinations of energy sources supplied
simultaneously unless this is prevented by interlocking devices.
5.7 Addition:
For ice-cream appliances, tests specified in Clauses 10, 11 and 13 are carried out at an
ambient temperature of 23 °C ± 2 °C.
For other appliances, tests specified in Clauses 10, 11, 13 and Subclause 19.103 are carried
out at an ambient temperature of
– 32 °C ± 1 °C on appliances of extended temperate (SN) and temperate (N) classes;
– 38 °C ± 1 °C on appliances of subtropical (ST) class;
– 43 °C ± 1 °C on appliances of tropical (T) class.
Before starting these tests, the appliance with the doors or lids open is brought to within 2 K of
the ambient temperature specified.
Appliances classified for several climatic classes are tested at the ambient temperature relevant
to the highest climatic class.
Other tests are carried out at an ambient temperature of 20 °C ± 5 °C.
Steady conditions are considered to be established when three successive readings of the
temperature, taken at approximately 60 min intervals, at the same point of any operating cycle,
do not differ by more than 1 K.
5.8.1 Addition:
Appliances which can be battery-operated are tested at the more unfavourable polarity when
the supply terminals or terminations for the connection of the battery have no indication for
polarity.
IEC 60335-2-24:2025 © IEC 2025 – 15 –
5.9 Addition:
Appliances incorporating an ice-maker are tested with the ice-maker operating to give the most
unfavourable results.
5.10 Addition:
For the tests of 22.107, 22.108 and 22.109, the appliance is empty and installed as outlined
below:
Built-in appliances are installed in accordance with the instructions for installation.
Other appliances are placed in a test enclosure, the walls enclosing the appliance as near to
all its sides and the top of the appliance as possible, unless the manufacturer indicates in the
instructions for installation that a free distance shall be observed from the walls or the ceiling,
in which case this distance is observed during the test.
NOTE 101 It is not necessary for commonly available fixing hardware, such as screws and bolts, to be delivered
with a fixed appliance.
5.101 Appliances which are constructed so that an ice-maker can be incorporated are tested
with the intended ice-maker.
5.102 Compression-type appliances with heating systems and Peltier-type appliances are
tested as combined appliances.
5.103 Compression-type appliances which use flammable refrigerants and which,
according to the instructions, can be used with other electrical appliances inside a food storage
compartment are tested with such recommended appliances incorporated and being operated
as in normal use.
NOTE Examples of such electrical appliances are ice-cream makers and deodorizers.
5.104 Normal operations of the appliance are specified as follows:
Normal operation of a refrigerating appliance: operation at an ambient temperature in
accordance with 5.7, empty, with the doors and lids closed. User-adjustable temperature control
devices which control the operation of the motor-compressor in compression-type appliances
are short-circuited or otherwise rendered inoperative.
Normal operation of an ice-maker: operation at an ambient temperature in accordance with
5.7, with the su
...