Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV

This European Standard specifies the requirements and method of installation for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1000 V but not exceeding 10.000 V, including the electrical components and wiring. The standard covers installations used for publicity, decorative or general lighting purposes, either for external or internal use. Such signs or luminous-discharge-tube installations may be either fixer or portable supplied from a low-voltage (L.V.) or extra-low-voltage (E.L.V) source by means of a transformer, invertor or convertor. Note: although the requirements are not specified in this Standard, attention is drawn to the need for an effective maintenance programme to be carried out on all signs or luminous-discharge-tube installations. The inspection and testing requirements included in any maintenance programme should closely follow those specified in clause 18 of this Standard

Leuchtröhrengeräte und Leuchtröhrenanlagen mit einer Leerlaufspannung über 1 kV aber nicht über 10 kV

Installations d'enseignes et de tubes lumineux à décharge fonctionnant à une tension de sortie à vide assignée supérieure à 1 kV mais ne dépassant pas 10 kV

Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV

General Information

Status
Withdrawn
Publication Date
23-Feb-1998
Withdrawal Date
31-Aug-1998
Drafting Committee
IEC/SC 34C - IEC_SC_34C
Parallel Committee
IEC/SC 34C - IEC_SC_34C
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Jan-2005
Completion Date
01-Jan-2005

Relations

Effective Date
28-Jan-2023

Buy Documents

Get Certified

Connect with accredited certification bodies for this standard

Intertek Testing Services NA Inc.

Intertek certification services in North America.

ANAB United States Verified

UL Solutions

Global safety science company with testing, inspection and certification.

ANAB United States Verified

ANCE

Mexican certification and testing association.

EMA Mexico Verified

Sponsored listings

Frequently Asked Questions

EN 50107:1998 is a standard published by CLC. Its full title is "Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV". This standard covers: This European Standard specifies the requirements and method of installation for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1000 V but not exceeding 10.000 V, including the electrical components and wiring. The standard covers installations used for publicity, decorative or general lighting purposes, either for external or internal use. Such signs or luminous-discharge-tube installations may be either fixer or portable supplied from a low-voltage (L.V.) or extra-low-voltage (E.L.V) source by means of a transformer, invertor or convertor. Note: although the requirements are not specified in this Standard, attention is drawn to the need for an effective maintenance programme to be carried out on all signs or luminous-discharge-tube installations. The inspection and testing requirements included in any maintenance programme should closely follow those specified in clause 18 of this Standard

This European Standard specifies the requirements and method of installation for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1000 V but not exceeding 10.000 V, including the electrical components and wiring. The standard covers installations used for publicity, decorative or general lighting purposes, either for external or internal use. Such signs or luminous-discharge-tube installations may be either fixer or portable supplied from a low-voltage (L.V.) or extra-low-voltage (E.L.V) source by means of a transformer, invertor or convertor. Note: although the requirements are not specified in this Standard, attention is drawn to the need for an effective maintenance programme to be carried out on all signs or luminous-discharge-tube installations. The inspection and testing requirements included in any maintenance programme should closely follow those specified in clause 18 of this Standard

EN 50107:1998 is classified under the following ICS (International Classification for Standards) categories: 29.140.30 - Fluorescent lamps. Discharge lamps. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 50107:1998 has the following relationships with other standards: It is inter standard links to EN 50107-1:2002. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 50107:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kVLeuchtröhrengeräte und Leuchtröhrenanlagen mit einer Leerlaufspannung über 1 kV aber nicht über 10 kVInstallations d'enseignes et de tubes lumineux à décharge fonctionnant à une tension de sortie à vide assignée supérieure à 1 kV mais ne dépassant pas 10 kVSigns and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV29.140.30Fluorescent lamps. Discharge lampsICS:Ta slovenski standard je istoveten z:EN
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...