EN IEC 60966-2-8:2022

SLOVENSKI STANDARD
01-oktober-2022
Sestavi radiofrekvenčnih in koaksialnih kablov - 2-8. del: Podrobna specifikacija za
kabelske sestave za radijske in TV sprejemnike - Frekvenčno območje do 3000
MHz, zaslonski razred A++, konektorji po standardu IEC 61169-47 (IEC 60966-2-
8:2022)
Radio frequency and coaxial cable assemblies - Part 2-8: Detail specification for cable
assemblies for radio and TV receivers - Frequency range up to 3000 MHz, Screening
class A++, IEC 61169-47 connectors (IEC 60966-2-8:2022)
Konfektionierte Koaxial- und Hochfrequenzkabel – Teil 2-8: Teil 2-8: Bauartspezifikation
für konfektionierte Kabel für Rundfunk- und Fernsehempfänger – Frequenzbereich 0
MHz bis 3000 MHz, Abschirmklasse A++, Steckverbinder nach IEC 61169-47 (IEC
60966-2-8:2022)
Cordons coaxiaux et cordons pour fréquences radioélectriques - Partie 2-8: Spécification
particulière pour cordons de connexion de récepteurs radio ou TV - Plage de fréquences
jusqu’à 3000 MHz, Classe d'écrantage A++, connecteurs IEC 61169-47 (IEC 60966-2-
8:2022)
Ta slovenski standard je istoveten z: EN IEC 60966-2-8:2022
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60966-2-8

NORME EUROPÉENNE
EUROPÄISCHE NORM August 2022
ICS 33.120.01
English Version
Radio frequency and coaxial cable assemblies - Part 2-8: Detail
specification for cable assemblies for radio and TV receivers -
Frequency range up to 3000 MHz, Screening class A++, IEC
61169-47 connectors
(IEC 60966-2-8:2022)
Cordons coaxiaux et cordons pour fréquences Konfektionierte Koaxial- und Hochfrequenzkabel - Teil 2-8:
radioélectriques - Partie 2-8: Spécification particulière pour Teil 2-8: Bauartspezifikation für konfektionierte Kabel für
cordons de connexion de récepteurs radio ou TV - Plage de Rundfunk- und Fernsehempfänger - Frequenzbereich 0
fréquences jusqu'à 3000 MHz, Classe d'écrantage A++, MHz bis 3000 MHz, Schirmungsklasse A++, Steckverbinder
connecteurs IEC 61169-47 nach IEC 61169-47
(IEC 60966-2-8:2022) (IEC 60966-2-8:2022)
This European Standard was approved by CENELEC on 2022-07-22. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60966-2-8:2022 E

European foreword
The text of document 46/890/FDIS, future edition 1 of IEC 60966-2-8, prepared by IEC/TC 46 "Cables,
wires, waveguides, RF connectors, RF and microwave passive components and accessories" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 60966-2-8:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-04-22
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-07-22
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60966-2-8:2022 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60966-1 2019 Radio frequency and coaxial cable EN IEC 60966-1 2019
assemblies - Part 1: Generic specification -
General requirements and test methods
IEC 60966-2-1 - Radio frequency and coaxial cable EN 60966-2-1 -
assemblies - Part 2-1: Sectional
specification for flexible coaxial cable
assemblies
IEC 60966-2-2 - Radio frequency and coaxial cable EN 60966-2-2 -
assemblies - Part 2-2: Blank detail
specification for flexible coaxial cable
assemblies
IEC 61169-47 - Radio-frequency connectors - Part 47: EN 61169-47 -
Sectional specification for radio-frequency
coaxial connectors with clamp coupling,
typically for use in 75 Ω cable networks
(type F-Quick)
IEC 61196-1-101 - Coaxial communication cables - Part 1- - -
101: Electrical test methods - Test for
conductor d.c. resistance of cable
IEC 61196-6-5 2020 Coaxial communication cables - Part 6-5: - -
Detail specification for Type A quad-shield
CATV drop cables with screening class
A++
IEC 62153-4-7 - Metallic cables and other passive EN IEC 62153-4-7 -
components test methods - Part 4-7:
Electromagnetic compatibility (EMC) -Test
method for measuring of transfer
impedance Z and screening attenuation
T
aS or coupling attenuation aC of connectors
and assemblies - Triaxial tube in tube
method
IEC 60966-2-8 ®
Edition 1.0 2022-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Radio frequency and coaxial cable assemblies –

Part 2-8: Detail specification for cable assemblies for radio and TV receivers –

Frequency range up to 3 000 MHz, Screening class A++, IEC 61169-47

connectors
Cordons coaxiaux et cordons pour fréquences radioélectriques –

Partie 2-8: Spécification particulière pour cordons de connexion de récepteurs

radio ou TV – Plage de fréquences jusqu’à 3000 MHz, Classe d'écrantage A++,

connecteurs IEC 61169-47
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.120.01 ISBN 978-2-8322-3871-4

– 2 – IEC 60966-2-8:2022 © IEC 2022
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Detail specification . 7
Annex A (informative) Identification and marking . 11
A.1 Identification – Type name . 11
A.2 Marking . 11

Table A.1 – Variants of connector . 11

IEC 60966-2-8:2022 © IEC 2022 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES –

Part 2-8: Detail specification for cable assemblies for radio and
TV receivers – Frequency range up to 3 000 MHz, Screening class A++,
IEC 61169-47 connectors
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 60966-2-8 has been prepared by IEC technical committee 46: Cables, wires, waveguides,
RF connectors, RF and microwave passive components and accessories. It is an International
Standard.
The text of this International Standard is based on the following documents:
Draft Report on voting
46/890/FDIS 46/896/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.

– 4 – IEC 60966-2-8:2022 © IEC 2022
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications.
A list of all parts in the IEC 60966 series, published under the general title Radio frequency and
coaxial cable assemblies, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on
...