EN 60534-8-1:2000
(Main)Industrial-process control valves - Part 8: Noise considerations - Section 1: Laboratory measurement of noise generated by aerodynamic flow through control valves
Industrial-process control valves - Part 8: Noise considerations - Section 1: Laboratory measurement of noise generated by aerodynamic flow through control valves
Defines equipment, methods and procedures for obtaining laboratory measurements of airborne sound-pressure levels radiated by control valves and/or associated piping configurations, including fixed restrictions, through which compressible fluids are passing. Provides a method of testing the noise-generating characteristics of control valves. The noise characteristics to be determined are useful for comparing the performance of different valves and planning measures for noise abatement.
Stellventile für die Prozeßregelung - Teil 8: Geräuschbetrachtungen - Hauptabschnitt 1: Laboratoriummessungen von Geräuschen bei gasdurchströmten Stellventilen
Vannes de régulation des processus industriels - Partie 8: Considérations sur le bruit - Section 1: Mesure en laboratoire du bruit créé par un débit aérodynamique à travers une vanne de régulation
Définit le matériel, les méthodes et les procédures pour obtenir des mesures en laboratoire des niveaux de pression acoustique aérienne rayonnée par les vannes régulation et/ou les configurations de tuyauteries associées, à travers lesquelles passent des fluides compressibles. Fournit une méthode d'essai des caractéristiques génératrices de bruit d'une vanne de régulation. Une méthode unifiée de mesure de bruit généré par la vanne et les tuyauteries d'essai associées permet une comparaison des différents résultats de mesure, qui est bénéfique à la fois à l'utilisateur et au fabricant. Les critères de bruit sont exprimés en déterminant le niveau de pression acoustique (NPA) de la vanne considérée. Les caractéristiques de bruit à déterminer sont utiles pour comparer le fonctionnement de différentes vannes, et prendre les dispositions pour atténuer le bruit.
Industrial-process control valves - Part 8: Noise considerations - Section 1: Laboratory measurement of noise generated by aerodynamic flow through control valves (IEC 60534 -8-1:1986)
General Information
- Status
- Withdrawn
- Publication Date
- 24-Oct-2000
- Withdrawal Date
- 31-Jul-2003
- Technical Committee
- CLC/SR 65B - Devices & process analysis
- Drafting Committee
- IEC/SC 65B - IEC_SC_65B
- Parallel Committee
- IEC/SC 65B - IEC_SC_65B
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Sep-2008
- Completion Date
- 01-Sep-2008
Relations
- Effective Date
- 29-Jan-2023
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 60534-8-1:2000 is a standard published by CLC. Its full title is "Industrial-process control valves - Part 8: Noise considerations - Section 1: Laboratory measurement of noise generated by aerodynamic flow through control valves". This standard covers: Defines equipment, methods and procedures for obtaining laboratory measurements of airborne sound-pressure levels radiated by control valves and/or associated piping configurations, including fixed restrictions, through which compressible fluids are passing. Provides a method of testing the noise-generating characteristics of control valves. The noise characteristics to be determined are useful for comparing the performance of different valves and planning measures for noise abatement.
Defines equipment, methods and procedures for obtaining laboratory measurements of airborne sound-pressure levels radiated by control valves and/or associated piping configurations, including fixed restrictions, through which compressible fluids are passing. Provides a method of testing the noise-generating characteristics of control valves. The noise characteristics to be determined are useful for comparing the performance of different valves and planning measures for noise abatement.
EN 60534-8-1:2000 is classified under the following ICS (International Classification for Standards) categories: 17.140.20 - Noise emitted by machines and equipment; 23.060.40 - Pressure regulators; 25.040.40 - Industrial process measurement and control. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 60534-8-1:2000 has the following relationships with other standards: It is inter standard links to EN 60534-8-1:2005. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 60534-8-1:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2001
Industrial-process control valves - Part 8: Noise considerations - Section 1:
Laboratory measurement of noise generated by aerodynamic flow through control
valves (IEC 60534 -8-1:1986)
Industrial-process control valves -- Part 8: Noise considerations -- Section 1: Laboratory
measurement of noise generated by aerodynamic flow through control valves
Stellventile für die Prozeßregelung -- Teil 8: Geräuschbetrachtungen -- Hauptabschnitt 1:
Laboratoriummessungen von Geräuschen bei gasdurchströmten Stellventilen
Vannes de régulation des processus industriels -- Partie 8: Considérations sur le bruit --
Section 1: Mesure en laboratoire du bruit créé par un débit aérodynamique à travers une
vanne de régulation
Ta slovenski standard je istoveten z: EN 60534-8-1:2000
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
23.060.40 7ODþQLUHJXODWRUML Pressure regulators
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...